췌장염에 의한 가성낭종내에 생긴 가성동맥류 : 1례 보고

오연희,이채경,김승현,이성우,양창현,이정호,이영현 동국대학교 경주대학 1996 東國論集 Vol.15 No.-

만성 췌장염의 합병증으로 생긴 가성동맥류는 드문질환으로, 반복적으로 다량의 출혈을 일으킬 수 있으며, 치료를 하지 않을 경우 사망율이 높기 때문에, 조기 진단과 치료가 필수적이다. 저자들은 38세 남자 환자에서 췌장염의 합병증으로 생긴 가성낭종내에서 발생한 가성동맥류 1예를 경험하였기에 보고하는 바이다. 가성 동맥류의 색혈류도플러상 낭종내에 양방향 흐름의 와류를 볼 수 있었다. Pancreatic Pseudoaneurysm within Pseudocyst from Pancreatitis: 1 Case Department of Diagnostic Radiology and Internal Medicine, College of Medicine,DongGuk University Yeon Hee OH M.D., Chae Kyeong Lee M.D., Seoung Hyeon Kim M.D., Sung Woo Lee M.D., Chang Heon Yang M.D., Jung Ho Lee M.D., Young Hyun Lee M.D. Pseudoaneurysm from pancreatitis is uncommon, but it can cause recurrent and massive hemorrhage. Because of high morbidity and mortality, early detection and treatment of the pseudoaneurysm is needed. We report a case of pseudoaneurysm within pseudocyst from pancreatitis. Color-flow Doppler sonography shows bidirectional flow and turbulent arterial flow, within anechoic mass.

Modulation of Gene Expressions and Enzyme Activities of Methionine Sulfoxide Reductases by Cold, Aba or High Salt Treatments in Arabidopsis

Oh, Jee-Eun,Hong, Suk-Whan,Lee, Yunsook,Koh, Eun-Ji,Kim, Kideok,Seo, Youngwon,Chung, Namhyun,Jeong, Moonsoo,Chang,Chang, Cheolseong,Lee, Byoungcheon,Kim, Kyoung Heon,Lee, Kwangwon,Lee, Hojoung 생명자원연구 2005 생명자원연구 Vol.13 No.-

일차적 비확공성 골수강 고정술로 치료한 제3형 개방성 경골 골절

오창욱,경희수,김도헌,박일형,김풍택,인주철,우연기,이정엽 대한골절학회 2004 대한골절학회지 Vol.17 No.2

마이크로웨이브 밴드용 Rotary Joint 설계 및 구현

오창헌,이명의 한국기술교육대학교 1999 論文集 Vol.6 No.1

Rotary joint is a rotating line minimizes the loss of electromagnetic wave between the fixed transmitter/receiver devices and continuously rotating antenna according to the azimuth and altitude in radar system or satellite communications systems. Rotary joint is implemented adaptively combining coaxial cable and rectangular/circular waveguide considering the feeding power and rotation speed. Therefore, it results in the junction of heterogeneous transmission lines and subsequently causes the discontinuity in the transmission medium. In this paper, we design and implement the dual channel rotary joint for microwave band (8.5GHz∼9.6GHz) and conforms its characteristics through experiments. Design are based on the optimal parameters obtained from the theoretical analysis and simulation results of the electromagnetic distribution, the transmission mode transition, and the mode matching at discontinuity point in the junction of two transmission lines having a different geometrical plane.

제주도 연안 갈치, Trichiurus lepturus 채낚기 어구의 생력화 : 3. 집어등의 수중조도

오승훈,서익조,김병엽,이창헌,정용진,서두옥,김동근 제주대학교 해양연구소 2001 해양자원연구소연구보고 Vol.25 No.-

저주파음에 의한 자리돔, Chromis notatus의 청각 능력 : 청각 문턱치

이창헌,서익조,오승훈,김병엽,서두옥,김동근 제주대학교 해양과환경연구소 2001 해양과환경연구소 연구논문집 Vol.25 No.-

In order to obtain the fundamenal data about method of luring fish schools by underwater sound, this experiment was carried out to investigte the auditory threshold of coralfish Chromis notatus which was on the coast of Jeju island by heartbeat conditioning technique using pure tones coupled with a delayed electric shock. The coralfish could hear a sound in the frequency range from 80 ㎐ to 800 ㎐. The mean auditory thresholds of coralfish at the frequencies of 80 ㎐, 100 ㎐, 200 ㎐, 300 ㎐, 500 ㎐ and 800 ㎐ were 100 ㏈, 99 ㏈, 91 ㏈, 88 ㏈, 96 ㏈ and 114 ㏈, respectively. As the frequency became higher than 300 Hz the auditory threshold increased rapidly.

지연유합과 불유합에서 저신호 강도 초음파의 유용성

윤여헌,김종오,고영도,유재두,정준모,오종건,방한천,최창호,신명철 대한골절학회 2003 대한골절학회지 Vol.16 No.1

목 적 : 저 신호 강도 초음파를 이용한 지연유합과 불유합의 치료에 대한 유용성을 알아보고자 하였다. 대상 및 방법 : 2001년 7월부터 2002년 5월까지 본원에 내원한 지연유합 7례와 불유합 8례를 대상으로 5개월간 저 신호 강도 초음파로 치료하여 5개월후 골유합 여부를 알아 보았다. 결 과 : 총 15례 중 대퇴골 간부 2례, 경골 간부 1례, 상완골 간부 1례, 요골 1례의 지연유합에서 골유합을 얻었고 대퇴골 간부 불유합 3례에서 유합을 얻었다. 지연주합은 71%의 유합율을, 불유합은 37.5%의 유합율을 보였다. 결 론 : 저 신호 강도 초음파는 골유합을 촉진 시킬 수 있으며 지연유합에서 시도해 볼 만 하나 불유합 치료를 위해서는 보다 많은 연구가 필요 하다. Purpose : To evaluation of usefulness of low-intensity ultrasound for nonunion and delayed union. Materials and Methods : For 5 months, we treated 7 delayed union and 8 nonunion using low-intensity ultrasound. After 5 months, in checked X-ray AP and Lateral view, when cortical bridge formation was done, we through union. Results : In 7 delayed union, 5 cases-2 femur, tibia, humerus, radius were healed. In 8 nonunion, 3 femur nonunion were healed. Union rate was 71% in delayed union 37.5% in nonunion. Conclusion : we thought that the low-intensity ultrasound has capacity of induction of union and was considered as the method of treatment for delayed union.

레일리 페이딩 환경에서 부분 SSPIC 다중 사용자 검파 기법을 적용한 DS-CDMA시스템의 성능분석

이현재,오창헌 한국기술교육대학교 2000 論文集 Vol.7 No.1

The performance of a successive concatenated cancellation scheme, partial SSPIC (Successive Serial Parallel Interference Cancellation) for code-division multiple-access (CDMA) uplink transmission in cellular mobile radio is analyzed. Modified partial serial and parallel cancellation stages are employed. The partial serial cancellation stage is used to shorten interference cancellation delay and the parallel cancellation stage is used to enhance system performance. Performance is analyzed in AWGN and flat Rayleigh fading asynchronous channels with both perfect and imperfect channel estimation. We have observed that the partial SSPIC multiuser detector can shorten effectively detection delay at SIC stage and maintain similar performance with SICPIC multiuser detector in both AWGN and flat Rayleigh fading channels. Therefore, proposed partial SSPIC multiuser detector can effectively improve the system performance without excessive detection delay time.

cdma2000 기지국용 수신기 설계 및 구현

신관호,오창헌 한국기술교육대학교 2001 論文集 Vol.8 No.1

Abstract In this paper, we design and implement an RF receiver for cdma2000 base station and evaluate its performance through experiment. The receiver down-converts the received 1.9GHz RF signal into 70MHz IF signal. The receiver has 1.23MHz channel bandwidth, wide dynamic range, better channel selectivity and sensitivity. From the experiment results, it is confirmed that designed receiver has above 80dB dynamic range, -105dBm sensitivity, 9dB noise figure. Therefore, designed receiver satisfies the design specifications of the cdma2000 radio part.

RF DIN Connector의 Passive IMD 개선에 관한 연구

고윤선,정재필,오창헌,신동욱 한국항행학회 2002 韓國航行學會論文誌 Vol.6 No.3

최근 이동통신 서비스가 확대됨에 따라 인접 기지국간의 간섭문제가 증가하게 되었으며, 그에 따라 CDMA시스템의 active IMD 뿐만 아니라 PIMD (Passive Inter Modulation Distortion)에 대한 문제도 시스템 설계 시 고려되어야 한다. 본 논문에서는 RF connector 중 대표적 connector인 7/16“ DIN connector를 통하여 동촉선에서의 PIMD발생 정도를 분석하였고, PIME 개선 방안을 제안하였다. 첫째, 대부분의 전류가 통과하는 경로에는 표면조도가 좋은 금속이 전도율이 좋아 유리하며, 둘째 RF에너지가 충분ㅎ히 한 매질에서 통과할 수 있도록 최소 5m 이상으로 도금을 해야 함을 알수 있었다. 셋째, 도금 재료의 노화현상 방지를 위해 비열이 높고 전도율이 높은 금속 선택이 필수적이며, 비용절감 면에서는 삼원합금 등 대체 도금 재질 개발이 요구됨을 알 수 있었다. 현재 국내 PIMD 규격인 KTF-150dBc를 만족시키기 위해서는 7/16“ DIN connector 의 경우 도금재질에 관계없이 표면조도 6s, 도금두께 5m일때 KTF의 PIMD 규정을 만족시킬 수 있음을 알 수 있었다. Recently, as the range of mobile communication services is extended, the interference between adjacent base-stations is increased. Nowdays, on of the important factors causing interference is IMD(Inter-Modulation Distortion) problems. Not only active IMD but also passive IMD effects must be considered to design a CDMA system. In this study, we design and implement 7/16'' DIN connectors which have a various intensity of surface illumination, thickness and quality of plating material to analyze the effects of PIMD. And propose the methods for improving the PIMD characteristics: First, it is more profitable to use the metal which has good intensity of surface illumination where most of all electric currents passes through it. Secondly, we should plate metals more than 5 μm for RF energy enough to propagate in a medium. Thirdly, it is necessary to select a metal having high conductivity and specific heat to protect the aging phenomenon of plate material. And it is required to develop a new plating material to replace the current materials, such as the alloy of three components for cost reduction. We have to know that the plate which has intensity of surface illumination 6 S and the thickness of plating material 5 μm satisfy domestic PIMD specification (KTF) - 150 dBc, regardless of the plate material in case of 7/16'' DIN connector.