http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Construction of an Efficient Overlay Multicast for Multi-layer
Bumjae Lee,Kangwhan Lee 대한전자공학회 2008 ICEIC:International Conference on Electronics, Inf Vol.1 No.1
As the MANET is becoming more noticed as a flexible and non-infrastructure network, routing algorism of the MANET is becoming an important issue. Especially, in the mobile Ad hoc, the method of the management of each Node is recognized as an important part of the next generation network from now on. In this paper used that Overlay Multicast Routing Algorism operates flexibly according to the various limited condition and environment of the MANET. Because of this Algorism have maintenance and transmission of the network to used virtual Overlay ID. But the existing Overlay Multicast applies only to Cluster made up single layer. And Clustering and maintenance of the cluster does not treat energy property. So, in this paper proposed Efficient Overlay Multicast for Multilayer(EOMM) is clustering consider residual energy of the node in the based multi-layer. And it has efficient overlay ID generation of the Node for the life time and the advantage of the Multi-layer is maintenance of nodes. Then more it provide faster operation in routing through Masking overlay ID in each layer. Our algorism reduces routing delay and more efficient Packet ratio and life time.
기능통합 드라이브 액슬 적용을 통한 한계 코너링 성능 향상
이수경(Sookyoung Lee),이범재(Bumjae Lee),김희준(Heejoon Kim) 한국자동차공학회 2022 한국자동차공학회 학술대회 및 전시회 Vol.2022 No.11
By applying Integrated Drive Axle into a vehicle, even though the camber stiffness is increased, the unsprung mass can be reduced. In this study, we investigate how the extreme cornering performance such as circuit driving is improved by the Integrated Drive Axle.
Ying, Wu Bin,Jang, Ji Uk,Lee, Min Woo,Hwang, Taek Sung,Lee, Kyung Jin,Lee, Bumjae Elsevier 2017 Journal of industrial and engineering chemistry Vol.47 No.-
<P><B>Abstract</B></P> <P>The sulfonated phenyl functionalized polystyrene-butadiene random copolymer was synthesized for application as flexible ion-exchange material. The polymer was prepared through phenyl functionalization via thiol-ene reaction and sulfonation of the base polystyrene-butadiene copolymer with different vinyl contents and phenyl contents. Sulfonation on phenyl functionalized polystyrene-butadiene copolymer was carried out in 1,2-dichloroethane at room temperature using the acetyl sulfonate as the sulfonation agent which was prepared from the reaction of acetyl acetate with sulfuric acid. The sulfonation degrees were adjusted from 7.3mol% to 24.3mol% determined by elemental analysis (EA) with great ion exchange capacity (0.60–2.26meq/g), conductivity (0.47–6.1mS/cm) and lower water uptake (5.1–12.8wt.%). These excellent characteristics lead to great potential using as the flexible ion-exchange material.</P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>
폴리카르복실레이트계 수용성 삼원공중합체의 합성 및 고품질시멘트용 고성능 가소제로의 적용
이범재,Wang, Meicong,Yan, Feng 충남대학교 산업기술연구소 2002 산업기술연구논문집 Vol.17 No.1
폴리카르복실레이트를 중심으로 황산염기와 폴리에틸렌옥사이드(PEO) 측쇄를 포함하는 다양한 조성을 가지는 수용성 아크릴형태 공중합체를 합성하여 고성능 시멘트에서 사용되는 특수분산제형 가소제로서의 성능을 연구하였다. 본 연구에서는 삼원공중합체의 자유라디칼 종합에서 분자량 및 함유된 이온의 조성 조절방법과 함께 고분자 구조에 따른 시멘트 페이스트의 유동성에 미치는 효과를 연구하였다. 연구 결과, sodium allyl sulfonate(SAS-Na)을 포함하는 공중합체에서 낮은 분자량을 나타내었으며, 삼원 단량체 중에서 methacrylic acid sodium salt(MAA-Na), SAS-Na, poly(ethylene glycol)methylethermethacrylate(MA-PEG)순으로 반응성이 커서 공중합체에 단량체 주입비보다 많이 함유되었다. 시멘트 유동화제로서의 성능에서 크기가 긴 PEO 가지를 가진 삼원공중합체가 황산염기와 카르복실레이트 이온기만을 가진 공중합체보다 시멘트의 유동성 유지에 더욱 큰 효과를 나타내었다. 즉 이러한 삼원 공중합체를 사용한 시멘트의 슬럼프 시험 결과 시간에 따라 유동성 감소가 적었으며, 낮은점도를 가져 고성능 시멘트용 유동화제로서 우수한 성능을 나타내었다.
Transparent Epoxy Resin Toughened with In-situ Azide-alkyne Polymerized Aliphatic Toughening Agent
Nho Hoon Kwak(곽노훈),Jin Seo Lee(이진서),Na Yeong Ko(고나영),Hee Sang Yang(양희상),Wu Bin Ying(영우빈),Bumjae Lee(이범재) 한국고분자학회 2019 폴리머 Vol.43 No.2
투명성을 유지하면서 에폭시의 인성을 향상시키기 위해서, in-situ 방법을 이용한 새로운 지방족 구조의 폴리머를 강인화제로 사용하였다. 에폭시와 click 반응의 유사한 반응 속도를 연구하고, 이를 통해 연속적인 에폭시 경화단계를 확립하였다. 먼저 선형의 지방족 강인화제를 에폭시 수지에서 합성하였고 그 후 경화제를 첨가하여 에폭시를 경화하였다. 이를 통해 semi-interpenetrating polymer network(semi-IPN) 구조를 가지는 에폭시를 제작하였다. Semi-IPN 구조를 가지는 강인화 에폭시의 특성은 기존 에폭시 및 preformed 에폭시에 비해 물성이 현저히 향상되었다. 10 wt% 강인화 에폭시의 경우 투명성과 Tg의 변화를 보이지 않으면서 2.62 MPa·m<SUP>1/2</SUP>의 향상된 파괴인성 수치 를 보였다. To improve the toughness of the epoxy resin while maintaining their transparency, a novel polymer, which has an aliphatic structure, is synthesized via in-situ azide-alkyne polymerization as a toughening agent. Because of the dissimilar kinetics of the epoxy system and click reaction, sequential curing process was designed. First, linear aliphatic toughening agents were formed in the epoxy resin, followed by curing of the epoxy matrix as the addition of curing agent, resulting in a semi-interpenetrating polymer network (semi-IPN). The toughened epoxy with in-situ synthesized polymer exhibits significantly improved mechanical properties compared to neat and toughened epoxy with preformed polymer, and it has increased value of toughness as high as 2.62 MPa·m<SUP>1/2</SUP> at 10 wt% of toughening agent contents with maintenance of their transparency and glass transition temperature.