Determination of Double-K Fracture Parameters of Concrete Using Split-Tension Cube

Shashi Ranjan Pandey,Shailendra Kumar,A. K. L. Srivastava 한국콘크리트학회 2016 International Journal of Concrete Structures and M Vol.10 No.2

This paper presents a revised procedure for computation of double-K fracture parameters of concrete split-tension cube specimen using weight function of the centrally cracked plate of finite strip with a finite width. This is an improvement over the previous work of the authors in which the determination of double-K fracture parameters of concrete for split-tension cube test using weight function of the centrally cracked plate of infinite strip with a finite width was presented. In a recent research, it was pointed out that there are great differences between a finite strip and an infinite strip regarding their weight function and the solution of infinite strip can be utilized in the split-tension specimens when the notch size is very small. In the present work, improved version of LEFM formulas for stress intensity factor, crack mouth opening displacement and crack opening displacement profile presented in the recent research work are incorporated. The results of the double-K fracture parameters obtained using revised procedure and the previous work of the authors is compared. The double-K fracture parameters of split-tension cube specimen are also compared with those obtained for standard three point bend test specimen. The input data required for determining double-K fracture parameters for both the specimen geometries for laboratory size specimens are obtained using well known version of the Fictitious Crack Model.

Determination of Double-K Fracture Parameters of Concrete Using Split-Tension Cube: A Revised Procedure

Pandey, Shashi Ranjan,Kumar, Shailendra,Srivastava, A.K.L. Korea Concrete Institute 2016 International Journal of Concrete Structures and M Vol.10 No.2

This paper presents a revised procedure for computation of double-K fracture parameters of concrete split-tension cube specimen using weight function of the centrally cracked plate of finite strip with a finite width. This is an improvement over the previous work of the authors in which the determination of double-K fracture parameters of concrete for split-tension cube test using weight function of the centrally cracked plate of infinite strip with a finite width was presented. In a recent research, it was pointed out that there are great differences between a finite strip and an infinite strip regarding their weight function and the solution of infinite strip can be utilized in the split-tension specimens when the notch size is very small. In the present work, improved version of LEFM formulas for stress intensity factor, crack mouth opening displacement and crack opening displacement profile presented in the recent research work are incorporated. The results of the double-K fracture parameters obtained using revised procedure and the previous work of the authors is compared. The double-K fracture parameters of split-tension cube specimen are also compared with those obtained for standard three point bend test specimen. The input data required for determining double-K fracture parameters for both the specimen geometries for laboratory size specimens are obtained using well known version of the Fictitious Crack Model.

Damage prediction of RC containment shell under impact and blast loading

Pandey, A.K. Techno-Press 2010 Structural Engineering and Mechanics, An Int'l Jou Vol.36 No.6

There is world wide concern for safety of nuclear power installations after the terrorist attack on World Trade Center in 2001 and several other civilian structures in the last decade. The nuclear containment structure in many countries is a double shell structure (outer shell a RCC and inner a prestressed concrete). The outer reinforced concrete shell protects the inner shell and is designed for external loading like impact and blast. A comparative study of non-linear response of reinforced concrete nuclear containment cylindrical shell subjected to impact of an aircraft (Phantom) and explosion of different amounts of blast charges have been presented here. A material model which takes into account the strain rate sensitivity in dynamic loading situations, plastic and visco-plastic behavior in three dimensional stress state and cracking in tension has been developed earlier and implemented into a finite element code which has been validated with published literature. The analysis has been made using the developed software. Significant conclusions have been drawn for dissimilarity in response (deflections, stresses, cracks etc.) of the shell for impact and blast loading.

Damage prediction of RC containment shell under impact and blast loading

A.K. Pandey 국제구조공학회 2010 Structural Engineering and Mechanics, An Int'l Jou Vol.36 No.6

There is world wide concern for safety of nuclear power installations after the terrorist attack on World Trade Center in 2001 and several other civilian structures in the last decade. The nuclear containment structure in many countries is a double shell structure (outer shell a RCC and inner a prestressed concrete). The outer reinforced concrete shell protects the inner shell and is designed for external loading like impact and blast. A comparative study of non-linear response of reinforced concrete nuclear containment cylindrical shell subjected to impact of an aircraft (Phantom) and explosion of different amounts of blast charges have been presented here. A material model which takes into account the strain rate sensitivity in dynamic loading situations, plastic and visco-plastic behavior in three dimensional stress state and cracking in tension has been developed earlier and implemented into a finite element code which has been validated with published literature. The analysis has been made using the developed software. Significant conclusions have been drawn for dissimilarity in response (deflections, stresses, cracks etc.) of the shell for impact and blast loading.

Monocrotophos Induces the Expression of Xenobiotic Metabolizing Cytochrome P450s (CYP2C8 and CYP3A4) and Neurotoxicity in Human Brain Cells

Tripathi, V. K.,Kumar, V.,Pandey, A.,Vatsa, P.,Dhasmana, A.,Singh, R. P.,Appikonda, S. H.,Hwang, I.,Lohani, M. Humana Press 2017 Molecular Neurobiology Vol. No.

<P>Expression of various cytochrome P450s (CYPs) in mammalian brain cells is well documented. However, such studies are hampered in neural/glial cells of human origin due to nonavailability of human brain cells. To address this issue, we investigated the expression and inducibility of CYP2C8 and CYP3A4 and their responsiveness against cyclophosphamide (CPA) and organophosphorus pesticide monocrotophos (MCP), a known developmental neurotoxicant in human neural (SH-SY5Y) and glial (U373-MG) cell lines. CPA induced significant expression of CYP2C8 and CYP3A4 in both types of cells in a time-dependent manner. Neural cell line exhibited relatively higher constitutive and inducible expression of CYPs than the glial cell line. MCP exposure alone could not induce the significant expression of CYPs, whereas the cells preexposed to CPA showed a significant response to MCP. Similar to the case of CPA induced expressions, neural cells were found to be more vulnerable than glial cells. Our data indicate differential expressions of CYPs in cultured human neural and glial cell lines. The findings were synchronized with protein ligand docking studies, which showed a significant modulatory capacity of MCP by strong interaction with CYP regulators-CAR and PXR. Similarly, the known CYP inducer CPA has also shown significant high docking scores with the two studied CYP regulators. We also observed a significant induction in reactive oxygen species (ROS), lipid peroxides (LPO), micronucleus (MN), chromosomal aberration (CA), and reduction in reduced glutathione (GSH) and catalase following the exposure of MCP. Moreover, the expressions of apoptotic markers such as caspase-3, caspase-9, Bax, and p53 were significantly upregulated, whereas the levels of antiapoptotic marker, Bcl2, was downregulated after the exposure of MCP in both cell lines. These findings confirm the involvement of ROS-mediated oxidative stress, which subsequently triggers apoptosis pathways in both human neural (SH-SY5Y) and glial (U373-MG) cell lines following the exposure of MCP.</P>

Determination of Regulator Parameters and Transient Analysis of Modified Self-commutating CSI-fed IM Drive

A. K. Pandey,S. M. Tripathi 대한전기학회 2011 Journal of Electrical Engineering & Technology Vol.6 No.1

In this paper, an attempt has been made to design the current and speed proportional and integral (PI) regulators of self-commutating current source inverter-fed induction motor drive having capacitors at the machine end and to investigate the transient performance of the same for step changes in reference speed. The mathematical model of the complete drive system is developed in closed loop,and the characteristic equations of the systems are derived using perturbation about steady-state operating point in order to develop the characteristic equations. The D-partition technique is used for finding the stable region in the parametric plane. Frequency scanning technique is used to confirm the stability region. Final selection of the regulator parameters is done by comparing the transient response of the current and speed loops for step variations in reference. The performance of the drive is observed analytically through MATLAB simulation.

Evaluation of Genetic Variability in Kenkatha Cattle by Microsatellite Markers

Pandey, A.K.,Sharma, Rekha,Singh, Yatender,Prakash, B.,Ahlawat, S.P.S. Asian Australasian Association of Animal Productio 2006 Animal Bioscience Vol.19 No.12

Kenkatha cattle, a draft purpose breed, which can survive in a harsh environment on low quality forage, was explored genetically exploiting FAO-suggested microsatellite markers. The microsatellite genotypes were derived by means of the polymerase chain reaction (PCR) followed by electrophoretic separation in agarose gels. The PCR amplicons were visualized by silver staining. The allelic as well as genotypic frequencies, heterozygosities and gene diversity were estimated using standard techniques. A total of 125 alleles was distinguished by the 21 microsatellite markers investigated. All the microsatellites were highly polymorphic with mean allelic number of 5.95${\pm}$1.9 (ranging from 3-10 per locus). The observed heterozygosity in the population ranged between 0.250 and 0.826 with a mean of 0.540${\pm}$0.171, signifying considerable genetic variation. Bottleneck was examined assuming all three mutation models which showed that the population has not experienced bottleneck in recent past. The population displayed a heterozygote deficit of 21.4%. The study suggests that the breed needs to be conserved by providing purebred animals in the breeding tract.

Population Structure and Genetic Bottleneck Analysis of Ankleshwar Poultry Breed by Microsatellite Markers

A. K. Pandey,Dinesh Kumar,Rekha Sharma,Uma Sharma,R. K. Vijh,S. P. S. Ahlawat 아세아·태평양축산학회 2005 Animal Bioscience Vol.18 No.7

Genetic variation at 25 microsatellite loci, population structure, and genetic bottleneck hypothesis were examined for Ankleshwar poultry population found in Gujrat, India. The estimates of genetic variability such as effective number of alleles and gene diversities revealed substantial genetic variation frequently displayed by microsatellite markers. The average polymorphism across the studied loci and the expected gene diversity in the population were 6.44 and 0.670짹0.144, respectively. The population was observed to be significantly differentiated into different groups, and showed fairly high level of inbreeding (f = 0.240짹0.052) and global heterozygote deficit. The bottleneck analysis indicated the absence of genetic bottleneck in the past. The study revealed that the Ankleshwar poultry breed needs appropriate genetic management for its conservation and improvement. The information generated in this study may further be utilized for studying differentiation and relationships among different Indian poultry breeds.

Determination of Regulator Parameters and Transient Analysis of Modified Self-commutating CSI-fed IM Drive

Pandey, A.K.,Tripathi, S.M. The Korean Institute of Electrical Engineers 2011 Journal of Electrical Engineering & Technology Vol.6 No.1

In this paper, an attempt has been made to design the current and speed proportional and integral (PI) regulators of self-commutating current source inverter-fed induction motor drive having capacitors at the machine end and to investigate the transient performance of the same for step changes in reference speed. The mathematical model of the complete drive system is developed in closed loop, and the characteristic equations of the systems are derived using perturbation about steady-state operating point in order to develop the characteristic equations. The D-partition technique is used for finding the stable region in the parametric plane. Frequency scanning technique is used to confirm the stability region. Final selection of the regulator parameters is done by comparing the transient response of the current and speed loops for step variations in reference. The performance of the drive is observed analytically through MATLAB simulation.

Stellar contents and star formation in the young star cluster Be 59

Pandey, A. K.,Sharma, Saurabh,Ogura, K.,Ojha, D. K.,Chen, W. P.,Bhatt, B. C.,Ghosh, S. K. Blackwell Publishing Ltd 2008 Monthly notices of the Royal Astronomical Society Vol.383 No.3

<P>ABSTRACT</P><P>We present <I>UBV I</I><SUB><I>c</I></SUB> CCD photometry of the young open cluster Be 59 with the aim to study the star formation scenario in the cluster. The radial extent of the cluster is found to be ∼10 arcmin (2.9 pc). The interstellar extinction in the cluster region varies between <I>E</I>(<I>B</I>−<I>V</I>) ≃ 1.4 to 1.8 mag. The ratio of total-to-selective extinction in the cluster region is estimated as 3.7 ± 0.3. The distance of the cluster is found to be 1.00 ± 0.05 kpc. Using near-infrared (NIR) colours and slitless spectroscopy, we have identified young stellar objects (YSOs) in the open cluster Be 59 region. The ages of these YSOs range between <1 and ∼2 Myr, whereas the mean age of the massive stars in the cluster region is found to be ∼2 Myr. There is evidence for second-generation star formation outside the boundary of the cluster, which may be triggered by massive stars in the cluster. The slope of the initial mass function, Γ, in the mass range 2.5 < <I>M</I>/M<SUB>⊙</SUB>≤ 28 is found to be −1.01 ± 0.11 which is shallower than the Salpeter value (−1.35), whereas in the mass range 1.5 < <I>M</I>/M<SUB>⊙</SUB>≤ 2.5 the slope is almost flat. The slope of the <I>K</I>-band luminosity function is estimated as 0.27 ± 0.02, which is smaller than the average value (∼0.4) reported for young embedded clusters. Approximately 32 per cent of Hα emission stars of Be 59 exhibit NIR excess indicating that inner discs of the T Tauri star (TTS) population have not dissipated. The Midcourse Space Experiment (MSX) and <I>IRAS-HIRES</I> images around the cluster region are also used to study the emission from unidentified infrared bands and to estimate the spatial distribution of optical depth of warm and cold interstellar dust.</P>