http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
축력과 반복수평력을 받는 격자강판 내진보강벽의 구조거동에 관한 실험적 연구
박정우,심기철,박진영,이영학,김희철,Park, Jung Woo,Sim, Ki Chul,Park, Jin Young,Lee, Young Hak,Kim, Heecheul 한국전산구조공학회 2012 한국전산구조공학회논문집 Vol.25 No.6
근래에 지어진 건축물의 경우 지진에 대한 안전성을 확보하고 있지만 1983년 개정이전의 건축물은 내진설계가 미반영 되어 있어 지진에 대해 매우 취약하다. 본 연구에서는 내진성능이 부족한 기존 건축물의 지진 발생 시의 안전성 확보를 위한 내진보강 방안으로 격자강판 내진보강벽을 제안한다. 축력과 반복수평력을 받는 성능실험을 수행하였으며, 실험체는 벤치마크 용도로 순수 철근콘크리트 프레임(BM-RC)과 프레임 내부에 격자강판 내진보강벽(SW-RC)을 설치한 2개의 실험체를 제작하여 실험을 수행하였고, 축력과 횡하중 가력을 위하여 500kN용량의 엑츄에이터 2대와 2,000kN용량의 엑츄에이터 1대를 사용하였다. 실험결과를 통해 벤치마크 실험체와 비교하여 강도, 강성, 연성 및 에너지소산능력을 평가하였다. The recently constructed buildings are ensuring seismic safety with enhanced design criteria. But, the buildings unapplied enhanced design criteria are very weak. In this study, steel grid shear wall is proposed as a solution of seismic retrofit to ensure safety of the existing buildings for the earthquake. And the structural performance experiments were carried out under axial force and cyclic lateral loads. The two specimens were made of a reference RC frame and steel grid shear wall in-filled RC frame. The test setup configured with two dynamic actuators, for the axial force with a 500kN capacity actuator and for the cyclic lateral load applied with the 2,000kN actuator. Compared with control specimen, the strength, stiffness, ductility, energy dissipation capacity of the seismic retrofit structures is evaluated.
MCM-41, 48 메조포러스 물질 및 SiO<sub>2</sub>에 담지한 헤테로폴리산의 특성 및 촉매적 활성
박정우,김범식,이정민,이관영,Park, Jung-Woo,Kim, Beom-Sik,Lee, Jung-Min,Lee, Kwan-Young 한국공업화학회 1999 공업화학 Vol.10 No.7
헤테로폴리산(HPW)을 표면적이 서로 다른 담체인 $SiO_2$ MCM-41, MCM-48에 담지농도와 소성온도를 달리하며 담지시켰다. X-선 회절분석, 질소 흡착법, 적외선 흡수 스펙트럼, $^{31}P$ 고체 핵자기 공명을 통해서 이 담지촉매의 특성을 조사하였다. IR과 NMR의 결과로부터 HPW가 담체안에서 케긴 구조를 유지하면서 존재함을 확인할 수 있었다. MCM-41의 경우에는 35 wt %, MCM-48의 경우에는 65 wt %로 담지시킨 경우에도 X-선 회절패턴에서 HPW 고유의 피크가 나타나지 않았으며, 이와 같은 특성을 통해서 HPW가 고분산 되어 있음을 알 수 있었다. Di, bis, tri-pentaerythritol의 가수분해 반응에서 이들 담지 촉매는 높은 촉매 활성을 보였으며 HPW, $HPW/SiO_2$보다 HPW/MCM-41, 48의 촉매 활성이 더 우수하였다. Heteropoly acid(HPW) catalysts supported on three different carriers, an amorphous silica, MCM-41 and MCM-48, with different loadings and calcination temperatures have been prepared and characterized by X-ray diffraction, nitrogen physorption, infrared spectroscopy, and $^{31}P$ magic angle spinning NMR. From the result of IR and NMR, it was shown that HPW retains the Keggin structure on the supported catalysts. No HPW crystal phase was developed even at HPW loadings as high as 35 wt % on the MCM-41 and 65 wt % MCM-48. Thus, HPW appeared to form finely dispersed species. In the hydrolysis reaction of di, bis, tri-pentaerythritol, HPW/MCM-41, 48 exhibited higher catalytic activity than $HPW/SiO_2$ or HPW.
한방 치료와 코어 운동을 병행한 퇴행성 슬관절염 환자 1례에 대한 증례보고
박정우,정수현,Park, Jung-Woo,Jeong, Su-Hyeon 척추신경추나의학회 2013 척추신경추나의학회지 Vol.8 No.2
Objectives : The objective of this study is to report the effect of Traditional Korean medical therapy and core exercise on osteoarthritis of knee joint by observing a clinical case study. Methods : Patient with a diagnosis of osteoarthritis of knee joint, was treated by acupuncture, herb medicine, physical theraphy and core exercise. Results : After treatment, Visual Analogue Scale(VAS), Korean version of the Western Ontario and McMaster Universities(KWOMAC), Pain Rating Score(PRS) were reduced from 5 to 2, from 25 to 16, from 55 to 27, and CENTAUR test results were improved. Conclusions : This study showed that Traditional Korean medical therapy and core exercise has meaningful effect on osteoarthritis of knee joint, and more researches should be followed.
비탄성 정적해석을 이용한 격자강판 전단벽 보강 RC구조물의 내진성능평가
박정우,이재욱,박진영,이영학,김희철,Park, Jung Woo,Lee, Jae Uk,Park, Jin Young,Lee, Young Hak,Kim, Heecheul 한국전산구조공학회 2013 한국전산구조공학회논문집 Vol.26 No.6
최근에 지어진 건축물의 경우 지진에 대한 안전성을 확보하고 있지만, 내진설계 도입 이전의 건축물은 지진에 대해 매우 취약하다. 본 연구에서는 내진성능이 부족한 기존 저층 RC구조물의 지진 발생 시 안전성 확보를 위한 내진보강 방안으로 격자강판 전단벽을 제안하고 내진성능평가를 수행하였다. 횡력저항요소로 사용된 격자강판 전단벽의 탄소성 이력특성값은 실험결과를 토대로 횡력저항 기여도등을 평가하여 작성된 이선형곡선을 적용하였다. 비탄성 정적해석을 통해 대상구조물의 성능점을 찾아내어 적용 지진하중에 대한 응답과 성능수준을 평가하였다. 격자강판 전단벽을 적용한 경우, 보강 전에 비하여 응답변위가 약 42% 저감되는 것을 확인할 수 있었으며, 성능점에서 거의 탄성거동을 보여주고 있어 목표성능인 인명안전수준을 만족시켰다. 또한 반응수정계수를 산정하여 내진보강 효과를 검증하였으며, 보강 전과 후에 각각 2.17에서 3.25로 증가하여 설계기준을 초과하였다. 따라서 격자강판 전단벽에 의해 대상 구조물의 강도 및 강성보강이 적절히 수행된 것으로 판단된다. The effects of earthquakes can be devastating especially to existing structures that are not based on earthquake resistant design. This study proposes a steel grid shear wall that can provide a sufficient lateral resistance and can be used as a seismic retrofit method. The pushover analysis was performed on RC structure with and without the proposed steel grid shear wall. Obtain the performance point that the target structure for seismic loads applied to evaluate the response and performance levels. The capacity spectrum at performance point is nearly elastic range, so satisfied the performance objectives(LS level). And response modification factor(R factor) were calculated from the pushover analysis. The R factor approach is currently implemented to reflect inelastic ductile behavior of the structures and to reduce elastic spectral demands from earthquakes to the design level. The R factor increases from 2.17 to 3.25 was higher than the design criteria. As a result, according to reinforcement by steel grid shear wall, strength, stiffness, and ductility of the low-rise RC structure has been appropriately improved.
환경규제대응을 위한 프탈레이트 가소제 인증표준물질(PP) 개발 연구
박정우(Park Jung-woo),정정설(Jung Jung-sul),유석(Yoo Seok),김창성(Kim Chang-seong),선일식(Sun Yle-shik),박승빈(Park Seung-bin),최창휴(Choi Chang-hyoo) 표준인증안전학회 2015 표준인증안전학회지 Vol.5 No.1
The Phthalates plasticizers (DBP, BBP and DEHP) are categorized and regluated as SVHC under EU REACH Regulation. Also European Commision was reviewing DEHP and BBP as restricted substances according to clause 6 of RoHS Directive. Responding to these international environmental restrictions, we developed PP certified reference material for determination of phthalate plasticizers such as DMP, DEP, DBP, BBP, DEHP and DnOP. The CRM is manufactured in powder forms by using PP substrate and 6 types of plasticizers in twin screw extruder and had confirmed it s homogeneity, short-term stability, and long-term stability using isotope dilution-gas chromatography/mass spectrometer (ID-GC/MS) analysis. The certified values were determined by using primary reference material (PRM) of KRISS for traceability. From now on, we will provide PP CRM to national and international companies and research institutes after certification as certified reference material and registering on COMAR (code of reference material).
항공기용 다기능 레이더 자원 관리자 및 환경 통합 시뮬레이터
박정우(Jung-Woo Park),장대성(Dae-Sung Jang),최한림(Han-Lim Choi),탁민제(Min-Jea Tahk),노지은(Ji-Eun Roh),김선주(Seon-Joo Kim) 한국항공우주학회 2013 韓國航空宇宙學會誌 Vol.41 No.7
본 논문은 항공기용 다기능 레이더의 통합적 자원관리를 수행하는 자원관리자와 레이더/환경 시뮬레이터 구축에 대한 연구 결과를 설명한다. 레이더/환경 시뮬레이터는 항공기 레이더의 표적 탐지/측정 모델, 탑재된 레이더의 좌표변환을 고려한 추적 필터 및 효율적인 표적 생성 알고리듬을 포함한다. 항공기 레이더 자원관리 알고리듬의 각 모듈별구조와 기능을 도출하고, 구축된 레이더/환경 시뮬레이터를 통해 시험ㆍ검증하였다. In this paper, an integrated radar resource manager for an airborne multi-function radar and a radar-environment simulator are presented. The radar-environment simulator includes target detection/measurement models, a nonlinear tracking filter for the airborne radar and an effective target generation algorithm. The structures and functions of modules in the radar resource manager are established and validated by the radar-environment simulator.