Effect of Zn2+ and F- Co-Modification on the Structure and Electrochemical Performance of Li4Ti5O12 Anode Material

Aijia Wei,Wen Li,Lihui Zhang,Xiaohui Li,Xue Bai,Zhenfa Liu 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2017 NANO Vol.12 No.5

Zn2+ and F- ions are successfully used to modify pure Li4Ti5O12 via a co-precipitation method followed by calcination at 400℃ for 5 h in an Ar atmosphere in order to further investigate the reaction mechanism of the fluoride modification process. Zn2+ and F- co-modified Li4Ti5O12 samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and electrochemical measurements. After the modification process, no ZnF2 coating layer is formed on the surface of Li4Ti5O12, instead, F- ions react with Li4Ti5O12 to generate a new phase, composed of a small amount of anatase TiO2, rutile TiO2, LiF, and Zn2+ ions are suspected to form a ZnO coating layer on Li4Ti5O12 particles. The electrolyte reduction decomposition is suppressed in Zn2+ and F- co-modified Li4Ti5O12 due to the ZnO coating layer. 1 wt.% Zn2+ and F- co-modified Li4Ti5O12 exhibits the best rate capability, which leads to a charge capacity of 236.7, 227.8, 222.1, 202.7, 188.9 and 150.7 mAh g -1 at 0.2C, 0.5C, 1C, 3C, 5C and 10C, respectively, between 0 V and 3 V. Furthermore, 1 wt.% Zn2+ and F- comodified Li4Ti5O12 exhibits 96.0% charge capacity retention at 3C rate after 200 cycles, which is significantly higher than that of pure Li4Ti5O12 (78.4%).

In-situ PECVD-enabled graphene-V₂O₃ hybrid host for lithium–sulfur batteries

Song, Yingze,Zhao, Wen,Wei, Nan,Zhang, Li,Ding, Feng,Liu, Zhongfan,Sun, Jingyu Elsevier 2018 Nano energy Vol.53 No.-

<P><B>Abstract</B></P> <P>Lithium–sulfur (Li–S) batteries have been regarded as promising candidates for current energy-storage technologies due to their remarkable advantages in energy density and theoretical capacity. However, one of the daunting challenges remained for advanced Li–S systems thus far deals with the synchronous suppression of polysulfide (LiPS) shuttle and acceleration of redox kinetics. Herein, a cooperative interface bridging adsorptive V<SUB>2</SUB>O<SUB>3</SUB> and conductive graphene is constructed <I>in-situ</I> by virtue of direct plasma-enhanced chemical vapor deposition (PECVD), resulting in the design of a novel V<SUB>2</SUB>O<SUB>3</SUB>-graphene hybrid host to synergize the LiPS entrapment and conversion. The redox kinetics and electrochemical performances of thus-derived cathodes were accordingly enhanced owing to the smooth adsorption-diffusion-conversion of LiPSs even at a sulfur mass loading of 3.7 mg cm<SUP>–2</SUP>. Such interfacial engineering offers us a valuable opportunity to gain insight into the comprehensive regulation of LiPS anchoring ability, electrical conductivity and ion diffusive capability in hybrid hosts on suppressing the LiPS shuttle and propelling the redox kinetics. Our devised PECVD route might pave a new route toward the facial and economic design of hetero-phased multi-functional hosts for high-performance Li–S systems.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Graphene-V<SUB>2</SUB>O<SUB>3</SUB> hybrid host was designed <I>in-situ</I> based on PECVD route. </LI> <LI> Thus-derived cathode showed a low capacity decay of merely 0.046% per cycle at 2 C after 1000 cycles. </LI> <LI> Cathodes with a relatively high sulfur mass loading (3.7 mg cm<SUP>–2</SUP>) were fabricated. </LI> <LI> The smooth adsorption-diffusion-conversion of polysulfides was thoroughly probed <I>via</I> experimental studies and DFT simulations. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Synchronous immobilization and conversion of polysulfides on a VO₂-VN binary host targeting high sulfur load Li-S batteries

Song, Yingze,Zhao, Wen,Kong, Long,Zhang, Li,Zhu, Xingyu,Shao, Yuanlong,Ding, Feng,Zhang, Qiang,Sun, Jingyu,Liu, Zhongfan The Royal Society of Chemistry 2018 ENERGY AND ENVIRONMENTAL SCIENCE Vol.11 No.9

<P>Lithium-sulfur (Li-S) batteries are deemed as one of the most promising next-generation energy storage systems. However, their practical application is hindered by existing drawbacks such as poor cycling life and low Coulombic efficiency due to the shuttle effect of lithium polysulfides (LiPSs). We herein present an <I>in situ</I> constructed VO2-VN binary host which combines the merits of ultrafast anchoring (VO2) with electronic conducting (VN) to accomplish smooth immobilization-diffusion-conversion of LiPSs. Such synchronous advantages have effectively alleviated the polysulfide shuttling, promoted the redox kinetics, and hence improved the electrochemical performance of Li-S batteries. As a result, the sulfur cathode based on the VO2-VN/graphene host exhibited an impressive rate capability with ∼1105 and 935 mA h g<SUP>−1</SUP> at 1C and 2C, respectively, and maintained long-term cyclability with a low capacity decay of 0.06% per cycle within 800 cycles at 2C. More remarkably, favorable cyclic stability can be attained with a high sulfur loading (13.2 mg cm<SUP>−2</SUP>). Even at an elevated temperature (50 °C), the cathodes still delivered superior rate capacity. Our work emphasizes the importance of immobilization-diffusion-conversion of LiPSs toward the rational design of high-load and long-life Li-S batteries.</P>

Research on Li0.3Na0.18K0.52NO3 promoted Mg20Al-CO3 LDH/GO composites for CO2 capture

Ying Yang,Kai Chen,Liang Huang,Min Li,Taiping Zhang,Mi Zhong,Ping Ning,Junya Wang,Shikun Wen 한국공업화학회 2021 Journal of Industrial and Engineering Chemistry Vol.102 No.-

It has been reported that the addition of graphene oxide (GO) can increase the dispersion and heterogeneousnucleation of layered double hydroxide (LDH), thus providing more active sites, which is more conduciveto CO2 adsorption. Herein, we reported alkali metal nitrates ((Li0.3Na0.18K0.52)NO3) promoted LDHand GO composites (LDH/GO) as adsorbents for CO2 capture. The influence of mass ratio of LDH to GO, theimpregnation ratio of alkali metal nitrates, the calcination and adsorption temperature, as well as thecycling stability were investigated systematically. The results indicated that the CO2 capture capacityof LDH/GO composite with 30 mol% (Li0.3Na0.18K0.52)NO3 could reach 4.51 mmol g 1, which was 5.86times higher than LDH/GO1 without loading alkali metal nitrates. Moreover, it had outstanding CO2adsorption capacity in the range from 200 C to 320 C. In addition, the cyclic adsorption and desorptiontest manifested that the CO2 uptake of the material can reach 3.07 mmol g 1 after 22 cycles. We believethat this study will give a significant contribution to fabrication of LDH based composites as CO2 adsorbentsin future study.

Vanadium Dioxide-Graphene Composite with Ultrafast Anchoring Behavior of Polysulfides for Lithium-Sulfur Batteries

Song, Yingze,Zhao, Wen,Zhu, Xingyu,Zhang, Li,Li, Qiucheng,Ding, Feng,Liu, Zhongfan,Sun, Jingyu American Chemical Society 2018 ACS APPLIED MATERIALS & INTERFACES Vol.10 No.18

<P>The lithium-sulfur (Li-S) battery has been deemed as one of the most promising energy-storage systems owing to its high energy density, low cost, and environmental benignancy. However, the capacity decay and kinetic sluggishness stemming from polysulfide shuttle effects have by far posed a great challenge to practical performance. We herein demonstrate the employment of low-cost, wet-chemistry-derived VO<SUB>2</SUB> nanobelts as the effective host additives for the graphene-based sulfur cathode. The VO<SUB>2</SUB> nanobelts displayed an ultrafast anchoring behavior of polysulfides, managing to completely decolor the polysulfide solution in 50 s. Such a fast and strong anchoring ability of VO<SUB>2</SUB> was further investigated and verified by experimental and theoretical investigations. Benefitting from the synergistic effect exerted by VO<SUB>2</SUB> in terms of chemical confinement and catalytic conversion of polysulfides, the Li-S batteries incorporating VO<SUB>2</SUB> and graphene manifested excellent cycling and rate performances. Notably, the batteries delivered an initial discharge capacity of 1405 mAh g<SUP>-1</SUP> when cycling at 0.2 C, showed an advanced rate performance of ∼830 mAh g<SUP>-1</SUP> at 2 C, and maintained a stable cycling performance at high current densities of 1, 2, and 5 C over 200 cycles, paving a practical route toward cost-effective and environmentally benign cathode design for high-energy Li-S batteries.</P> [FIG OMISSION]</BR>

Current state of research about acupuncture for the treatment of COVID-19: A scoping review

Chen Chen,Jie Zhan,Hao Wen,Xiaojing Wei,Lu Ding,Chenyang Tao,Cui Li,Peiming Zhang,Yuyuan Tang,Jing-chun Zeng,Li-ming Lu 한국한의학연구원 2021 Integrative Medicine Research Vol.10 No.-

Background Since the outbreak of coronavirus disease (COVID-19), acupuncture has been widely used in the treatment of COVID-19. The research community has responded rapidly and has already published many research articles about this topic. Methods We searched PubMed, Embase, Cochrane Library as well as CNKI, Wanfang and VIP from January 1, 2020 to July 31, 2021. The dates of publication, language of publication, methodological characteristics and the key findings were analyzed separately. The data are presented as bar graphs, structured tables and figures. Results In this scoping review, 16 research articles were included: 7 case reports, 6 observational studies, 1 review, 1 RCT and 1 nonrandomized clinical trial. The majority of the articles (81.3%) were published by Chinese scholars, 12.5% articles were by scholars in the United States, and 6.3% articles were by scholars in Iran. The included studies reported that acupuncture could alleviate the symptoms of COVID-19 patients, shorten their hospitalization days, and is effective for the elderly. There were no side effects reported. The most frequent acupoints used were LI4, PC6, ST36 and KI3. They reported many obstacles in implementing acupuncture therapy for treating COVID-19 patients. Conclusion Acupuncture has a good effect for the treatment of COVID-19, but high-quality evidence support is still lacking. Coupled with the difficulties that acupuncturists experienced during the process of treatment, the promotion of acupuncture treatment for COVID-19 faces many obstacles. Background Since the outbreak of coronavirus disease (COVID-19), acupuncture has been widely used in the treatment of COVID-19. The research community has responded rapidly and has already published many research articles about this topic. Methods We searched PubMed, Embase, Cochrane Library as well as CNKI, Wanfang and VIP from January 1, 2020 to July 31, 2021. The dates of publication, language of publication, methodological characteristics and the key findings were analyzed separately. The data are presented as bar graphs, structured tables and figures. Results In this scoping review, 16 research articles were included: 7 case reports, 6 observational studies, 1 review, 1 RCT and 1 nonrandomized clinical trial. The majority of the articles (81.3%) were published by Chinese scholars, 12.5% articles were by scholars in the United States, and 6.3% articles were by scholars in Iran. The included studies reported that acupuncture could alleviate the symptoms of COVID-19 patients, shorten their hospitalization days, and is effective for the elderly. There were no side effects reported. The most frequent acupoints used were LI4, PC6, ST36 and KI3. They reported many obstacles in implementing acupuncture therapy for treating COVID-19 patients. Conclusion Acupuncture has a good effect for the treatment of COVID-19, but high-quality evidence support is still lacking. Coupled with the difficulties that acupuncturists experienced during the process of treatment, the promotion of acupuncture treatment for COVID-19 faces many obstacles.

CO2 Adsorption on the B12N12 Nanocage Encapsulated with Alkali Metals: A Density Functional Study

Haiyan Zhu,Qiyan Zhang,Qinfu Zhao,He Zhao,Yifan Feng,Bingbing Suo,Huixian Han,Qi Song,Yawei Li,Wenli Zou,Haiyan Zhu 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2019 NANO Vol.14 No.3

Density functional theory (DFT) calculations have been carried out to study the capacity of the B12N12 nanocage encapsulated with alkali metals (Li, Na, K) for the CO2 adsorption and activation. It is found that after encapsulating alkali metals, the alkali metal atoms are closer to one side of clusters instead of exactly lying at the center, and a considerable charge transfers from the inner alkali metal atoms to the B12N12 cage. Besides, the HOMO–LUMO gap (HLG) values of Li@B12N12, Na@B12N12 and K@B12N12 are decreased to about 6 eV, being much smaller than that of the pristine B12N12. Although the geometry structure parameters and the energy differences of M06-2X are slightly different from the ones of ωB97X-D, some identical results of two kinds of functional can be obtained. CO2 can be adsorbed chemically and physically on majority bonds of all the clusters, except for some bonds with large change in bond length and bond indices. The encapsulation of alkali-metal atoms may enhance the physical and chemical adsorption of CO2 on the surface of the clusters, in which Na@B12N12 and K@B12N12 are the most powerful physical and chemical adsorbent for CO2, respectively.

In-situ photocrosslinked hydroxide conductive membranes based on photosensitive poly(arylene ether sulfone) block copolymers for anion exchange membrane fuel cells

He, Rui,Wen, Pushan,Zhang, Hai-Ning,Guan, Shumeng,Xie, Guangyong,Li, Li-Zhong,Lee, Myong-Hoon,Li, Xiang-Dan Elsevier 2018 Journal of membrane science Vol.556 No.-

<P><B>Abstract</B></P> <P>A series of photocrosslinkable multi-block poly(arylene ether sulfone) copolymers containing various block lengths of hydrophilic segments were synthesized. For comparison, a series of random poly(arylene ether) copolymers were also synthesized. The anion exchange membranes(AEMs) were fabricated and in-situ photocrosslinking was carried out by UV irradiation in a swollen state. The microphase-separated morphologies of the multi-block membranes were characterized by SAXS and TEM experiments, and the membrane properties were investigated by measuring ion exchange capacity (IEC), water uptake, water swelling ratio, ionic conductivity, methanol permeability and alkaline stability. IECs and water uptakes of the crosslinked multi-block membranes were in the range of 1.11–1.42 meq g<SUP>−1</SUP> and 14.36–31.01% at 20 °C, respectively. The hydroxide conductivity was in the range of 11.38–25.00 mS cm<SUP>−1</SUP> at 20 °C, and showed a maximum value of 178.77 mS cm<SUP>−1</SUP> at 100 °C. The multi-block membranes exhibited low methanol permeability (2.75 × 10<SUP>−7</SUP> cm<SUP>2</SUP> s<SUP>−1</SUP>) at room temperature, which is one order of magnitude lower than that of Nafion® 117 (23.8 × 10<SUP>−7</SUP> cm<SUP>2</SUP> s<SUP>−1</SUP>). The crosslinked membranes showed excellent dimensional stability and alkaline stability with only a slight decrease in ionic conductivity. All the multi-block membranes showed superior properties compared to their corresponding random copolymers.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Multi-block poly(arylene ether sulfone) copolymers were synthesized for AEMs. </LI> <LI> <I>In-situ</I> photo-crosslinking was carried out by UV irradiation in hydrated states. </LI> <LI> The block copolymers exhibited hydrophilic/hydrophobic phase separated morphology. </LI> <LI> The block copolymers showed superior properties compare to the random copolymers. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

Research on outlier detection algorithm for express logistics

Zhang, Yan,Li, Zheyi,Wen, Jiefeng,Ma, Yiwei,Kwon, Oh-kyoung North-Holland Pub. Co 2017 Computers in industry Vol.92 No.-

<P><B>Abstract</B></P> <P>To detect the problems of time delay, path error and destination error in express logistics process effectively, a novel outlier detection algorithm for express logistics is proposed in this paper. To test the detection results, the express logistics system operating model is built to test the detection results. Experiment results show that the proposed algorithm is well applied to the express logistics data with multi-attribute characteristics, and can work well in detecting the abnormal conditions of express logistics.</P> <P><B>Highlights</B></P> <P> <UL> <LI> According to the characteristics and operation principle of joint distribution mode, constructing a virtual simulation system of the logistics operation model and simulating the operation process of the entire logistics activities of logistics orders from generation to the terminal distribution in joint distribution. </LI> <LI> To establish extraction method of the logistics distribution data feature based on the time, number, level, position coordinates and the urban point dependent relation, the method of describing the distribution characteristics accurately and effectively. </LI> <LI> According to the characteristics of joint distribution, put forward a kind of abnormal state detection and evaluation algorithm of logistics distribution, and identify the abnormal distribution of common delivery delay in delivery time, delivery path error, destination error (not the destination) and accurately in joint distribution. </LI> </UL> </P>

Mixtures of Tea and Citrus maxima (pomelo) Alleviate Lipid Deposition in HepG2 Cells Through the AMPK/ACC Signaling Pathway

Ran An,Shuai Wen,Dong-Li Li,Qiu-Hua Li,Xing-Fei Lai,Wen-Ji Zhang,Ruo-Hong Chen,Jun-Xi Cao,Zhi-Gang Li,Qiu-Sheng Huang,Ling-Li Sun,Shi-Li Sun 한국식품영양과학회 2020 Journal of medicinal food Vol.23 No.9

Tea and citrus maxima are natural, medicinal homologous plants, typically used for making beverages, which have anticancer, antiobesity, and antioxidation properties. Green tea, yellow tea, and black tea were combined with citrus maxima to obtain green tea and Citrus maxima (GTCM), yellow tea and Citrus maxima (YTCM), and black tea and Citrus maxima (BTCM). The biochemical components of these mixtures were analyzed, and their possible effects and mechanisms on relieving liver lipid deposition were explored. The tea polyphenols, free amino acids, phenolamine ratio, and caffeine were comparable in YTCM and GTCM, being significantly higher than those in BTCM. In addition, the content of esterified catechins, nonesterified catechins, and total catechins in YTCM was significantly higher than those in GTCM and BTCM. All three mixtures of Citrus maxima tea significantly reduced lipid deposition in HepG2 cells, with GTCM and YTCM being slightly more effective than BTCM. Regarding the possible mechanism, Western blot analysis revealed that the three Citrus maxima tea mixtures could activate the AMPK/ACC signaling pathway, upregulate the expression of p-AMPK, p-ACC, and CPT-1 proteins, and downregulate the expression of SREBP1c and fatty acid synthase proteins to inhibit fat synthesis, thereby relieving lipid deposition in liver cells. In conclusion, as a novel and healthy beverage, Citrus maxima tea has the potential to alleviate liver lipid deposition, and further could be responsible for obesity treatment.