http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sb-InSb및 Sn-Bi공정합금의 미세조직과 전기비저항
석명진,최길현,이동철,문인형,Seok, Myeong-Jin,Choe, Gil-Hyeon,Lee, Dong-Cheol,Mun, In-Hyeong 한국재료학회 1994 한국재료학회지 Vol.4 No.1
전형적인 f-f 및 nf-f 공정합금계로 분류되는 Sb-InSb 및 Sn-Bi 합금계를 일방향 응고시켜서 성장속도에 따른 전기비저항값의 변화를 조사함으로써 미세조직의 이방성을 전기비저항의 특성으로 분석하고자 하였다. Sb-InSb 계의 경우 26-34wt.% In, Sn-Bi 계의 경우 53-65wt.% Bi의 조성을 갖는 공정합금을 진공봉합시켜 Bridgman형의수직관상로에서 일방향응고시켰다. 일방향응고 시편을 횡단면 및 종단면으로 절단 채취하여 미세조직을 관찰한 후 전기비저항을 측정하였다. Sb-InSb , Sn-Bi공정복합조직의 경우 모두 성장속도의 증가에 따라 성장방향에 수평한 방향의 비저항값($\rho$┴)은 감소하였으며, Sb InSb 공정복합조직의 경우 특히 성장 속도의 증가에 따르는 미세조직상의 두가지 변화 즉, 상경계면적(phase boundary area)의 증가와 fiber방향성의 감소는 공히 $\rho$ ll 값을 증가시키는 반면 $\rho$┴ 값에는 서로 상반된 영향을 끼쳤다. 또한 성장속도의 증가에 따라 점차 조직의 이방성이 상실되었다. 이와 같이 측정된 전기비저항은 미세조직특성과 잘 일치하는 바 전기비저항 측정은 조직 특성분석의 유효한 도구가 될 수 있다. The dependence of the electrical resistivity on the eutectic composition and growth rates was investigated in the unidirectionally solidified Sb-InSb and Sn-Bi eutectic alloy systems, which were generally classified into the groups of f-f and nf-f eutectic system. Sb-InSb alloys containing 26-34wt.% In and Sn-Bi alloys containing 53-65wt.%Bi were prepared in vacuum sealed in a silica tube, and then these were unidirectionally solidified. Electrical resistivity of the specimens prepared by cutting the crystal section in parallel with the transverse direction and by cutting in longitudinal direction was measured. As the growth rate increased, the Sb-InSb and Sn-Bi eutectic alloys showed that the resistivity of longitudinal to the growth direction was increased but that of transverse to the growth direction was decreased. In the case of Sb-InSb eutectic alloy, increas~ng the phase boundary area and decreasing the fiber directionallity caused to increase the $p \; \parallel$ , while increasing the phase boundary area increased the $p \; \\perp$ As expected, the eutectic microstructure could be analysed well in terms of electrical resistivity.
기능화된 탄소나노튜브 멤브레인의 이온 선택성에 관한 분자동역학 연구
석명은 한국막학회 2018 멤브레인 Vol.28 No.6
Carbon nanotube (CNT) based membranes are promising candidates for separation membranes by showing high water transport rate and ion rejection rate according to their radii. The ion selectivity is an important factor to discover the full potential of CNT membranes, and it is affected by the functionalization of CNTs. With multivalent/size ion mixtures, the ion selectivity is affected by not only ion-functional groups interaction but also ion-ion interactions and ion size exclusion in a complex manner. In this study, molecular dynamics simulations are performed to study the ion selectivity of functionalized carbon nanotubes when multivalent/size ions are contained. The permeation energy barriers are calculated by plotting potential of mean force profiles, and various factors, such as CNT size and partial charges, affecting ion selectivity are investigated. The results presented here will be useful for designing CNT membranes for ion separation, biomimetic ion channels, etc. 탄소나노튜브(CNT) 기반의 멤브레인은 높은 물 전달률과 직경에 따른 이온 배제율로 해수담수, 물질 정화 등을 위한 분리막으로써의 가능성을 보여 주었다. 이온 선택성은 CNT 기반 멤브레인의 응용 분야를 확대하기 위한 중요한 요소이며, 기능기를 이용하여 이온 선택성의 조절이 가능함이 보고되었다. 다양한 원자가/크기의 이온이 혼합될 경우, 이온-기능기간 작용력 뿐만 아니라 이온-이온간의 작용력, 이온의 크기에 의한 반발력 등이 복합적으로 작용한다. 이에 본 연구에서는 분자동역학 전산모사를 통하여, 상이한 원자가/크기를 가진 이온의 혼합이 기능화된 CNT의 이온 선택성에 미치는 영향을 연구하였다. Potential of Mean Force 계산을 통하여 이온 투과에 대한 자유 에너지 장벽을 계산하였으며, CNT 크기 변화, 전하량 변화를 통하여 이온 선택성과 배제에 영향을 미치는 요소를 분석하였다. 본 연구는 CNT 멤브레인을 이용한 분리막 설계, 생체 이온 전달 채널 모사 등에 유용할 것으로 기대한다.