http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
柳志旭,洪思容,金英猷,李春雨 公州大學校 基礎科學硏究所 1993 自然科學硏究 Vol.2 No.-
회전거울을 이용한 광속측정법은 거울의 회전에 기인한 광원점의 상 변위를 측정함으로써 단순한 장치로 비교적 정확한 측정값을 기대할 수 있다. 그러나 정밀하고 적절한 기구정렬이 없이는 상을 찾기 어렵다. 이 논문에서는 이와 같은 문제점을 고찰하고 그 해결책을 모색하였다. 정밀한 기구정렬을 거쳐 공기중에서 측정한 광속은 c=2.99±.16×108m/s이었다. An advanced undergrauate laboratory experiment is described which uses a laser, a rotating mirror assembly, a fixed mirror and a measuring microscope to determine the speed of light using time of flight. We investigated the alignment methods to obtain a good image. The measurement value was c=2.99±.16×108m/s in air.
柳志旭,權寧駿 공주대학교 사범대학 과학교육연구소 1985 과학교육연구 Vol.17 No.1
This study is to analyze the status of current science education, and to find its improvement measure. For the analysis of current science cducation, the questionare to present science teachers, interview with science teacher and statistical data relative to education were used. The categories for the analysis were the curriculum and its management, facilities for experiments, teachers, and students. The improvement measure for the inquiring science learning are as follows: 1. The contents of learning should be systematically connected with the objec-tives of subject, and the methods of evaluation should be managed in order to measure the student's level of achievement in the light of objectives of subject. 2. Since the possession ratio of laboratories and experimental facilities is very low, a epoch-making remedy is required. Also, the management system should be improved in order to raise the level of its practical use, and the law of standard facilities should be reformed according to the new curriculum. 3. The opportunities of science teacher's training should be enlarged, and the class hours and mental burden should be lessened. 4. The teaching methods should be improved so that the student may play an active role in his class, and the number of students per one class should be diminished for the inquiring learning.
Rutherford 散亂實驗의 探究學習을 爲한 模型開發에 關한 硏究
金容福,金英猷,柳志旭,洪南觀 공주대학교 사범대학 과학교육연구소 1983 과학교육연구 Vol.15 No.1
E. Rutherford proposed a new theory of the scattering of alpha-particles by a matter. This theory was based on a new atomic and was succesful in describing the experimental results. The curves in Ruterford's model an alpha-particle near a nucleus are hyper-bolas, all with the nucleus at the focus by the Coulomb's law, Newton's law of motion, and the detailed geometrical arrangement. The essentials of alpha-particle scattering reproduce the methods of inquiring learning through the following three kinds of mechanical models. Theses models were many times analyzed by means of feedback and compar-ed with the experimental results by precise appliances. 1) Conic and ball model. 2) Magnet and magneticpendulum model. 3) Electrostatic body and styrofoam ball pendulum model.
Reductions of Some Representative Organic Compounds with $NaBH_4-(C_6H_5O)_3B$ System
윤능민,조병태,유지욱,김근풍,Nung Min Yoon,Byung Tae Cho,Ji Uk Yoo,Gun Poong Kim Korean Chemical Society 1983 대한화학회지 Vol.27 No.6
테트라히드로프란 용액에서 수소화붕소나트륨과 붕산트리페닐을 사용해서 카르복시산, 카르복시산염, 3차아미드 및 술폭시드를 환원하는 새로운 방법을 개발하였다. 즉 카르복시산은 실온에서 6~12시간에 정량적으로 환원될 수 있으며, 지방족 카르복시산염은 실온에서 6시간에 정량적으로 환원되나 방향족 산염은 $65^{\circ}C$에서 24시간이 소요되었다. 3차 아미드는 실온에서 3~6시간에 88∼100%의 좋은 수율로 환원되었으며, 조사한 대부분의 술폭시드는 실온에서 1~6시간에 98∼100%의 수율로 환원되었으나, 디페닐술폭시드는 보다 격렬한 조건에서 48시간에 환원할 수 있었다. New procedures for the reduction of carboxylic acids, carboxylic acid salts, tertiary amides, and sulfoxides with sodium borohydride and triphenyl borate in tetrahydrofuran were developed. Thus carboxylic acids were reduced quantitatively in 6∼12 h at $25^{\circ}C$. Alphatic acid salts were quantitatively reduced to the corresponding alcohols in 6h at $25^{\circ}C$ whereas aromatic acid salts required 24h at $65^{\circ}C$. Tertiary amides were reduced to the corresponding amines in 88∼100% yields in 3∼6h at room temperature. Most sulfoxides examined were reduced to the corresponding sulfides in 98∼100% yields in 1∼6h at $25^{\circ}C$ and completely reduced at $65^{\circ}C$; however, diphenyl sulfoxide required 48h in a more vigorous condition.
비정질 Fe_(90-x)Ni_(x)Zr_(10)(x=5, 10) 금속의 구조분석
李凞福,宋寅命,柳志旭,李春雨 公州大學校 基礎科學硏究所 1993 自然科學硏究 Vol.2 No.-
X-선 회절상을 분석하여 비정질 fe90-x NixZr10 (x=5,10) 금속의 구조를 구하였다. X-선 회절상은 2θ가 20˚ 근방과 35˚ 근방에서 전형적인 비정질 금속의 halo상을 나타냈으며, 구조인자와 원자분포함수의 각 peak는 비대칭성을 나타내어 액체금속과는 다른 구조를 보였다. 계산된 동경분포함수(RDF)의 각 peak들은 인접원자들의 분포를 나타내는 것으로서 Gaussian 함수형태를 나타내었으며, 이들을 Gaussian 함수로 각각 fitting하여 구조에 관한 변수들을 구하였다. Fe80 Ni10 Zr10의 구조분석 결과 최인접 원자배위수는 13.2이 었고, 최인접 원자간 평균거리 r0는 2.60Å, 인접원자들의 분포폭을 나타내는 Gaussian 함수의 변수 δr은 0.35Å이었다. 또한 Fe85 Ni5 Zr10의 최인접 원자배위수는 13.8이 었으며, r0는 2.62Å, δr은 0.35Å, 이었다. 본 시료의 δr은 일반적인 비정질 금속들의 값보다 훨씬 크게 나타났다. X-ray diffraction patterns of amorphous fe90-x NixZr10 (x=5,10) alloys were analyzed to obtain the structural information. The X-ray diffraction pattern of the amorphous alloys consists of typical halo-patterns at diffraction angles near 2θ = 20˚ and 35˚. And the structure factor and the atomic distribution function have unsymmetrical peaks differed from those of liquid metals. The structural parameters representing the atomic distributions of near-neighbors were obtained by Gaussian fittings to the peaks of the radial distribution function (RDF). From these parameters the estimated coordination numbers were 13.2 and 13.8, the mean distances between nearest neighbor atoms r0 were 2.60Å and 2.62Å, and the Gaussian parameters δr indicating the range of nearest atomic distribution were broth 0.35 Å for amorphous Fe80 Ni10 Zr10 and Fe85 Ni5 Zr10 alloys, respectively. The parameters δr of the amorphous allays turn out to be much larger than those of typical amorphous alloys.
클라이언트 / 서버 환경에서의 MPEG - 2 비선형 편집기의 설계 및 구현
김소만(Soh-Man Kim),송기택(Ki-Tark Song),유지욱(Ji-Wook Yoo),이성환(Scong-Whan Lee) 한국정보과학회 2000 한국정보과학회 학술발표논문집 Vol.27 No.1B
최근 들어, 통신 및 멀티미디어의 발달과 더불어 대용량 동영상 데이터의 효과적인 관리 및 처리 방법에 대한 연구가 활발히 진행되고 있는 추세이다. 따라서 본 논문에서는 동영상 압축 표준인 MPEG-2데이터의 효과적인 관리 및 처리를 위한 클라이언트/서버 환경에서의 비선형 편집 시스템을 구현하였다. 본 시스템은 압축 정보를 이용하여 최소한의 복호화 과정을 통해 장면전환 검출 및 색인을 수행하는 색인부와 DirectX를 기반으로 한 편집부로 크게 구성되어 있다. 본 논문에서는 압축 정보를 사용하여 빠르게 색인을 수행하고, DirectX 기술을 사용함으로써 다양한 편집 기능을 제공하며 사용자에게 직관적이고 간편한 인터페이스를 제공한다. 또한 클라이언트/서버 환경에서의 편집 기능을 제공함으로써 고성능의 편집 서버를 통해 저 사양의 클라이언트 컴퓨터에서도 소프트웨어적으로 MPEG-2 동영상을 효과적으로 편집할 수 있는 시스템을 구현 하였다.