http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
문병연,황기주,이윤정,유동식 한국안광학회 2010 한국안광학회지 Vol.15 No.1
Purpose: We investigated the changes of plastic lens after etching of coating films by comparing uncoated lens. Methods: CR-39, middle index and high index lenses of 0 (zero) diopter were etched at 80oC and room temperature using a coating remover, and then changes of refractive power, transmittance and surface morphology were investigated. Results: There were no differences in refractive power and transmittance between uncoated and etched lenses. The etching rate was similar in both CR-39 and middle index lens, but in the case of high index lens, it was slower and less steady than the others. From the SEM observation of lens surface, etching damage was found out on the surface of etched lens. It was shown the least damage in middle index lens but the most damage in high index lens. Conclusions: If the etching of coating films is demanded on condition that the surface of ophthalmic lenses are not damaged, a using of most adequate coating remover based on lens material should be considered, and a caution for proper etching conditions is required. 목적: 플라스틱렌즈 표면의 코팅막을 식각한 렌즈와 무코팅렌즈를 비교함으로써, 코팅의 식각이 렌즈에 미치는 변 화를 연구하였다. 방법: 굴절력이 0 디옵터인 CR-39, 중굴절률, 고굴절률렌즈를 코팅제거제를 사용하여 80oC와 상 온에서 식각하였고, 굴절력, 투과율 및 렌즈 표면의 변화를 조사하였다. 결과: 코팅의 식각으로 렌즈의 굴절력의 변 화는 없었으며, 무코팅렌즈와 식각된 렌즈의 광투과율도 거의 차이가 없었다. 식각속도는 CR-39와 중굴절률렌즈에 서 비슷하였으나 고굴절률렌즈에서는 느리고, 불규칙하였다. 렌즈 미세 표면을 관찰한 결과 렌즈 표면에 식각으로 인한 손상이 나타났는데, 중굴절률렌즈의 손상이 가장 적었고, 고굴절률렌즈에서 가장 많았다. 결론: 안경렌즈 표면 이 손상되지 않도록 코팅막을 식각하려면, 렌즈 소재에 맞는 적합한 코팅제거제가 사용되어야 하며, 적절한 식각조 건에 대한 주의가 필요할 것이다.
권용훈,박미경,황기주,설효정,김형일 대한치과재료학회 2008 대한치과재료학회지 Vol.35 No.3
본 연구는 Er:YAG 레이저로 처리한 후 추가적인 불소의 처리가 법랑질의 산저항성에 어떤 영향을 미치는지를 평가하는 것으로 이를 위하여 결함이 없고 깨끗한 우치 법랑질을 구입하고 4개의 군으로 나누었다: 레이저를 처리하지 않은 군 (1군), Er:YAG 레이저 처리군 (2군), Er:YAG 레이저 처리 + 불소 처리군 (3군), Er:YAG 레이저 처리 + CO₂ 레이저 처리 + 불소 처리군 (4군). 4개 군을 초산용액을 기본으로 하는 산성용액으로 탈회와 재광화를 4일간 반복 (pH-cycling) 한 후 치아에서의 미네랄 용해와 형상변화를 관찰하였다. 그결과 Er:YAG 레이저 처리 후 치아표면은 거칠고 불규칙한 톱니모양의 형상을 하였다. CO₂ 레이저 처리 후 표면은 녹고 재응결되면서 길고 깊은 균열을 남겼다. pH-cycling 후 뚜렷한 표면형상 변화는 없었으나 2군과 3군에서 micropores들이 관찰되었다. 용출된 미네랄의 양은 군마다 유의하게 달랐는데 특히 4군에서 용출된 Ca와 P의 양이 가장 적었다. 그러나 3군과 비교했을 때 절대적인 양에는 큰 차이가 없었다.
딥러닝 기반 얼굴인식을 이용한 자동 책상 높이와 균형 제어 시스템의 구현
배현한(Hyeon-Han Bae),황기주(Gi-Ju Hwang),임용석(Yong-Seok Lim),신진호(Jin-Ho Shin) 한국정보기술학회 2022 Proceedings of KIIT Conference Vol.2022 No.12
본 논문에서는 인공지능 방법을 이용하여 사용자의 키에 적합한 책상 높이를 자동적으로 조정하는 제어 시스템을 제안한다. 제안된 시스템은 이차원 카메라와 딥러닝 모델을 이용한 얼굴인식을 수행한다. 딥러닝 기반 얼굴인식을 이용하여 사용자 키 추정 알고리즘을 제안하며, 추정된 사용자 키에 적합하도록 하는 자동 책상 높이 제어 시스템을 구현한다. 또한 IMU 센서를 이용하여 책상의 기울기 각도의 측정과 상보 필터의 구현을 통하여 책상의 균형 제어기가 제시된다. 제안된 시스템의 타당성과 유용성은 실험 결과를 통하여 검증된다. 제안된 시스템은 스마트 헬스케어 디바이스에 중요하게 응용될 수 있으며 사람들이 건강을 매우 잘 관리하도록 도와줄 수 있다. In this paper, we propose a control system which adjusts automatically the desk height suitable for user height using artificial intelligence approach. The proposed system performs face recognition using a two-dimensional camera and a deep learning model. We propose a user height estimation algorithm using deep learning based face recognition and we implement an automatic desk height control system so that can fit for the estimated user height. Also, A balancing controller of the desk is presented through the measurement of the tilt angle of the desk using a IMU sensor and the implementation of a complementary filter. The validity and usefulness of the proposed system is verified through the experimental results. The proposed system can be significantly applied to smart healthcare devices and it can help human beings manage their health very well.