http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Single Mode Lasing in InGaAsP/InP Semiconductor Coupled Square Ring Cavities
현경숙,문희종,이태규 한국광학회 2012 Current Optics and Photonics Vol.16 No.2
This work reports the stability of the resonant characteristics in multimode interferometer coupled square ring semiconductor cavities. Based on the analysis of single square ring cavities, the single mode operations in the multimode interferometer coupled ring cavities are analyzed and the devices are demonstrated on the semiconductor multiple quantum well epitaxial structure. By varying the lasing conditions such as substrate temperature and input pump power, single resonant mode operations are also observed.
광 결정 구조 변수에 따른 고출력 단일모드 수직공진 표면발광 레이저의 발진 특성
이진웅,현경숙,신현의,김희대,Lee, Jin-Woong,Hyun, Kyung-Sook,Shin, Hyun-Ee,Kim, Hee-Dae 한국광학회 2009 한국광학회지 Vol.20 No.6
결정을 이용하여 고출력 단일모드 특성을 가지는 수직공진 표면발광 레이저를 제작하고 발진 특성을 관찰하였다. 일반적으로 광 밴드갭 형성을 위해 수십개의 광 결정 홀을 식각하나, 이번 연구에서는 6개의 홀만으로 단일모드를 구현하였고, 폴리이미드로 홀을 메우게 되어 신뢰성이 유리한 장점이 있다. 산화 구경과 광 결정 홀의 크기를 변화시키며 실험을 진행하여 단일모드 특성의 변화를 분석하였다. 다양한 광 결정 구조를 가진 수직공진 표면발광 레이저에서 고출력 단일모드 발진이 가능함을 확인하였다. The high power and single mode vertical cavity surface emitting laser(VCSEL)s with photonic crystal structures have been proposed and fabricated by reducing substantially the hole numbers used in the photonic crystal structures. It is found that only six holes enable VCSELs to operate a single mode and the reliability can be enhanced by filling the holes with polyimide. The single mode lasing characteristics were analyzed by varying the oxide aperture and the hole diameter in photonic crystal structures. As a result, the single mode lasing can be stably obtained in the photonic crystal vertical cavity surface emitting lasers.
Bow-tie Mode Lasing in a Grooved Rectangular Semiconductor Microcavity
문희종,현경숙 한국광학회 2012 Current Optics and Photonics Vol.16 No.2
Bow-tie modes were proposed in a grooved rectangular resonator and their lasing characteristics were investigated in semiconductor microcavities. The observed spacing between two adjacent lasing peaks from the grooved cavity was reduced compared to that of 4-bounce whispering gallery modes (WGMs) from the same-sized simple rectangular cavity due to increased round-trip path length of the bow-tie modes. The lasing spectra of bow-tie modes obtained from two adjacent corners showed highly correlated patterns while those of 4-bounce WGMs did not.
다중모드 간섭기를 이용한 반도체 이중사각형 링 공진기에서의 단일모드 발진 특성
정달화,문희종,현경숙,Jeong, Dal-Hwa,Moon, Hee-Jong,Hyun, Kyung-Sook 한국광학회 2009 한국광학회지 Vol.20 No.1
다중모드 간섭기를 이용한 반도체 이중사각형 링 공진기에서의 단일 파장 모드 발진특성을 관찰하였다. 실험에 사용된 공진기의 에피택시는 발진 중심파장이 $1.55{\mu}m$인 InGaAsP-InP 다중양자우물 구조를 활성층으로 사용하여 제작되었다. 공진기의 구조는 다중모드 간섭기를 결합기로 이용한 이중사각형 링 공진기이며 발진특성을 측정하였다. 여러 가지 구조 변수를 즉 공진기의 구조 및 크기, 다중모드 간섭기의 길이를 변화시키며 실험을 진행하였다. 실험 결과 다양한 크기와 구성에서 단일파장모드선택 특성이 잘 나타남을 확인할 수 있었다. We report the spectral characteristics of Multimode Interferometer (MMI)-coupled semicondoctor square ring resonators. The epitaxial layers of the proposed semiconductor ring resonator consists of $1.55{\mu}m$ GaInAsP-InP multiple quantum wells. The lasing characteristics were observed by varying the structure parameters of the MMI-coupled square ring resonators. It is concluded that the MMI-coupled scheme selects a single spectral lasing mode in the double square ring cavities.