http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한승목,남우진,이성수,Han, Seung-Mok,Nam, Woo-Jin,Lee, Seongsoo 한국전기전자학회 2013 전기전자학회논문지 Vol.17 No.2
본 논문에서는 차세대 동영상 압축 표준인 HEVC의 핵심 프로세스 중 하나인 코어 변환기를 설계하고 이를 합성한 후 검증하였다. 제안하는 코어 변환기는 면적을 많이 차지하는 곱셈기 대신에 덧셈기와 쉬프터만을 사용하였으며, 쉬프터도 실제로는 와이어 연결과 멀티플렉서만을 사용하여 면적을 크게 줄였다. 또한 하나의 하드웨어로 $4{\times}4$에서 $16{\times}16$ 블록까지 모두 처리할 수 있도록 설계하였으며, 이를 위해서 연산처리기를 재사용하는 아키텍쳐를 제안하였다. 0.13um 공정으로 설계된 코어 변환기는 $16{\times}16$ 블록을 2-D 변환 처리하는데 160 사이클이 소요되며 게이트 수는 101,015 게이트이다. This paper proposes and implements an core transform architecture, which is one of the major processes in HEVC video compression standard. The proposed core transform architecture is implemented with only adders and shifters instead of area-consuming multipliers. Shifters in the proposed core transform architecture are implemented in wires and multiplexers, which significantly reduces chip area. Also, it can process from $4{\times}4$ to $16{\times}16$ blocks with common hardware by reusing processing elements. Designed core transform architecture in 0.13um technology can process a $16{\times}16$ block with 2-D transform in 130 cycles, and its gate count is 101,015 gates.
한승목(Seung-Mok Han),민경식(Kyeong-Sik Min) 한국전자파학회 2008 한국전자파학회논문지 Vol.19 No.5
이 논문은 휴대 단말기의 내장형 FM(Frequency Modulation) 라디오 안테나의 설계에 관하여 기술하고 있다. 설계 안테나의 동작 주파수에서의 임피던스를 조절하기 위해서 집중 정수 소자인 R과 L칩 소자를 사용하였다. 안테나 후면의 패치와 스터브는 설계 안테나의 정확한 공진 주파수의 조절과 소형화를 위해 추가하였다. 제작된 안테나의 크기, 측정된 반사 손실, 임피던스, 대역폭, 이득은 각각 40×70×1 ㎜, 99 ㎒에서 -23 ㏈, 55-j7 Ω, -10 ㏈ 이하 22 ㎒(88~110 ㎒), -15 ㏈i이고, 시뮬레이션 결과와 잘 일치하였다. 특히 제작된 안테나의 측정 이득은 설계 주파수 대역 내에서 기존의 이어폰 안테나의 이득과 유사한 값을 보였다. 측정된 방사 패턴도 계산된 무지향성 패턴과 잘 일치하였다. This paper describes a design of internal frequency modulation(FM) radio antenna for mobile terminal. In order to control of impedance at an operating frequency of the designed antenna, the lumped constant elements of R and L chip components are used. Patch and stubs located at antenna backside are added to control an exact resonance frequency and miniaturization. A fabricated antenna size, the measured return loss, impedance, bandwidth, and gain are 40×70×1 ㎜, -23 ㏈ at 99 ㎒, 55-j7 Ω, 22 MHz(88~110 ㎒) below -10 ㏈, and -15 ㏈i, respectively. These measured results show a good agreement with simulated results. Especially, the measured gain of fabricated antenna is similar with value of a conventional ear-phone antenna in the designed frequency band. The measured radiation pattern agrees well with the calculated omni-directional pattern.