RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 학위유형
        • 주제분류
          펼치기
        • 수여기관
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 지도교수
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 公企業 民營化에 따른 勞使葛藤 克服 方案 : 韓國全力公社를 中心으로

        韓東錫 전남대학교 2001 국내석사

        RANK : 247631

        本 硏究는 公企業 民營化에 따른 勞使關係 葛藤 克服方案에 대해 韓國電力 公社를 중심으로 연구 기술하였다. 우리나라 경제는 지난 1997년 이후 2년여 동안 IMF라는 미증유의 경제적 위기 상황에서 신음해야 했다. 한보·기아사태를 계기로 환란 위기에 내몰려 6.25이후 최악의 국가 혼란 시대를 맞이하여 기업의 연쇄도산이라는 실물부문의 위기로 이어졌고 급속한 企業構造調整의 과정에서 大規模 失業과 雇傭調整이라는 사회의 위기로 치달았다. 다행히 위기극복을 위한 단합된 노력의 결과 극단적 위기상황은 탈피했지만, 한번 지나간 듯한 위기가 언제 다시 찾아올지 아무도 장담할 수 없는 불안한 상황이 지속되고 있다. 이러한 상황에서 韓國經濟가 위기를 극복하고 근본적으로 재생하기 위해서는 勞使關係 부분에서의 변화개혁이 필수적으로 요구된다. 특히 그 동안 국가발전에 기여해온 公企業의 경우 지금은 그 규모가 너무 비대해져 있고 방만한 경영과 자기 발전이 없는 무사안일에 빠져 있어 다른 부분에 비해 보다 더 강도 높은 구조조정이 요구된다. 韓國電力의 民營化는 단계적으로 추진되고 있으며 發電部門을 분할매각하기 위한 사전단계로 전력산업구조개편 관련법안이 2000년 10월 定期國會에 상정되어 통과되었다. 韓電 民營化의 目的은 독점체제인 전력산업에 경정을 도입하여 電力 공급의 효율성을 제고하고 장기적으로 값싸고 안정적인 전력을 공급할 뿐만 아니라 전력사용에 있어서 소비자의 선택권을 확대하고자 하는데 목적을 두고 있다. 民營化를 주관하는 기획예산처나 학계는 非效率性을 제거하고 재무구조의 악화를 방지하기 위하여 민영화가 바람직하다는 견해인 반면, 경영자층은 다소 중립적이다. 그리고 민영화에 대해 韓國電力勞組는 무조건 반대하는 입장이다. 구조조정으로 인하여 노조가 분할될 뿐만 아니라 노동력의 감축을 우려하기 때문이다. 勞組側은 정부가 지나치게 관치 경영했을 뿐만 아니라 선거 때마다 公企業을 정치적으로 이용했기 때문에 부실하지 구조조정을 하지 않아 부실하다고 보지 않고 있다. 韓國電力公社의 전력사업은 대체재가 없는 필수재의 성격과 산업에 있어서는 핵심적인 동력원과 전후방 산업연관관계를 통한 직·간접인 영향에 있어서도 국가 경제적 중요성이 다른 어느 산업에 비해 크며 電力事業은 전원개발을 촉진하고 전기사업의 합리적인 운영을 기함으로써 전력수급의 안정을 도모함과 아울러 國民經濟 발전에 이바지함을 목적으로 설립되어서 전력의 안정적 공급을 위하여 노사간의 공동으로 경영에 참여하여 效率性 提高와 품질 좋은 電氣를 供給하여야 된다. 이 논문은 公企業 民營化에 따른 勞使關係 葛藤에 대해 분석하고 그 갈등 克復 方案을 연구한 것으로 그 내용은 다음과 같다. 첫째, 公企業에 대해서 그 개념 및 설립동기, 필요성 등을 살펴보고 우리나라 公企業 현황에 대하여 조사하였다. 둘째, 公企業 구조조정과 관련하여 公企業 民營化의 배경 및 필요성, 民營化의 추진현황에 대해 기술하였다. 셋째, 公企業과 관련된 勞使關係의 이론적 배경으로 勞使關係에 대해 개념적으로 고찰하였고, 公企業 勞使關係의 특성 및 연혁에 대해 살펴보고 또한 公企業 勞使關係의 실태를 기술하였다. 넷째, 韓國電力公社에 대해 개관하고 韓電의 民營化 논의에 대해 살펴보고 한전의 노동조합과 한전의 勞使關係에 대해 기술하였다. 끝으로, 한국전력공사 勞使關係의 課題와 勞使關係 葛藤 克服方案을 연구 내용으로 제시하였다. 韓國電力公社의 國際 競爭力과 電力事業 경쟁력 강화를 위한 새로운 노사관계의 정립을 위해 경영혁신이나 전력사업의 목표와 전략을 수립하는 과정에 있어서 經營者側에서는 참여를 통한 협력을 유도하여 경영자측의 전용물로 생각했던 經營革新이나 목표, 전략의 수립에 근로자를 적극 참여시켜 근로자 측의 지혜와 아이디어를 적극 수용해야 하며, 勤勞者側에서는 경영혁신이나 전략실천을 적극 지원하고 이를 일관성 있게 추진하는지 감시하여 政策의 一貫性이 유지되도록 해야 한다. 本 硏究에서 살펴본 바와 같이 公企業 勞使關係 葛藤克服 方案으로서는 勤勞者는 실질적 공공주의를 구현하고, 政府는 조정자적 역할을 수행하고 經營者의 참여적 민주주의 여건을 조성함으로써 協力的 勞使關係를 마련하여야 한다. 그리고 勞使關係에 관한 법률규정 및 제도를 합리적으로 정비하여야 한다. 나아가서 經營者와 勤勞者 사이의 진지한 대화를 전제로 한 韓國民의 인간관계 특성에 부합하는 勞使關係를 모색하여 실천해 나가야 할 것이다. This research is focused on KEPCO(The Korea Electric Power Corporation)'s conflicts between whether it's better to be controlled by Public management or private management. As it's well known, the Korean economic condition had been painful under IMF pressure for last two years. This IMF was followed by another crises due to HANBO-STEEL CO & KIA AUTOMOBILE that had lead into the worst economic situation in Korean history after the Korean War (6.25) All these economic problems had produced the biggest unemployment. Fortunately this crises moment was overcame with everyone's cooperation and united effort, however due to its severe condition that we had to go through, no one can guarantee or assure of it's restoration. Other words, there is still possibility going back to where it was someday. In order to solve such instability of Korean economy which was produced by inconsiderate management plan and easy-going style of managing the co., the restructure and reformation other than anything else is required. Changing KEPCO into private management is driving gradually and the related bill was passed in a regular session of the National assembly on Oct. 2000. In addition, the private management also may bring all the consumers' participation in giving various opinions and ideas that are the most powerful source of improvement of this issue. The Office planning budget and the academic which have charge of changing into private management are positive in order to getting rid of inefficiency and preventing aggravation of financial affairs. On the other hand, the management keep more or less neutrality and the labors are against unconditionally. Because they apprehend decomposing the union as well as curtailing of employment due to restructing. The electric power business of KEPCO is very important nationally for other industry in essential goods without substitute goods through the front and rear industrial relationship and every effects. It promote development of electric resource and by contributing to rational operation of electric business. In addition, by contributing to development of national economy, to supply of electric power stably, they should consider efficiency and provide good electric power for the people. This statement is to analyze the situations of Public ownership management & Private management and to research and study why private management is more favored by the Government. The following steps are possible explanations why. First, Researched & analyzed the overall concept, current situation, purpose of foundation and needs of Public management. Second, Described the possible structuring alternation and background of Public Management to P/M and why. Third, Described the general idea and consideration of P/M's theoretical background and the labor & management relationship. Forth, Surveying KEPCO and explained the KEPCO's the relationship of labor union and management. Finally, The suggestion was given for possible resolution to get over with the relationship of labor and management's difficult situation in Korean economy. To establish new relationship of between labor and management and to strengthen KEPCO's national competitive power and business strategic competitive power, it is required from operator's active participation and positive cooperation they must not consider business operation as their private use and the labors also need to participate and give ideas and to exchange opinions in order to carry out the strategy and this attitude must be kept throughout. It is very important that korean government must act as controller, controlling the environment of participant democracy. in other words, the government need to consolidate the labor and management related rules or law based on logic and rationalization. Another essential step between the operator and labors is opened communication, so that they can promote appropriate korean characterized relationship which may accept directly on best improvement of a relationship between labor and management.

      • 腰部前彎角이 運動能力에 미치는 影響

        한동석 명지대학교 대학원 1982 국내석사

        RANK : 247631

        本 硏究는 人?의 腰部前彎角이 運動能力에 어떠한 影響을 미치는가 觀察하기 爲하여 試圖한 것이다. 被驗者는 서울 은평구 所在 大成高等學校 二學年 男學生 134名을 無作爲 標集 ( Random Sampling ) 하였으며 , 腰部前彎角을 測定한 角度別集團을 136° ~ 140° 集團과 141° ~ 145° 集團. 146° ~ 150° 集團, 151° ∼ 155° 集團 , 그리고 156° ~ 160° 의 角度를 가진 다섯 개 集團으로 區分하였다. 따라서 다섯개 集團別 運動能力檢査는 柔軟性檢査 ( Flexibility Test ) 인 서서 윗몸 앞으로 굽히기 ( Standing trunk flexion ) 와 瞬發力檢査 ( Power Test ) 인 제자리 멀리 뛰기 ( Standing broad jump ) , 敏捷性檢査 ( Agility Test ) 인 사이드 스텝 테스트 ( Side step test ) , 筋持久力檢査 ( Muscular Endurance Test ) 인 버피 테스트 ( Burpea test ) , 그리고 平衡性檢査 ( Balunce Test ) 인 스틱 테스트 ( Stick test ) 의 다섯 種目으로 局限 하였다. 그 結果 제자리 멀리 뛰기 ( S . B . J ) , 사이드 스텝 테스트 ( S . S . T ) 버피 테스트 ( B .T ) , 스틱 테스트 ( S , T )에서 는 腰部前彎角이 큰 集團일 수록 成就度가 높게 나타났으며, 서서 윗몸 앞으로 굽히기 ( S . T . F ) 에서는 151° ~ 155° 集團이 18.01 ± 3.69로 優秀 하였으며 , 136° ~ 146° 集團은 全體的으로 不振한 成績을 나타냈다. 以上과 같은 結果를 通하여 얻어진 結論은 다음과 같다. 첫째 : 腰部前彎角檢査에서는 全體 134名中 151° ~ 155° 의 集團이 45名( 33.6% )으로 가장 많은 人員의 比率을 나타냈으며 145° 이하의 集團도 34名( 25.4% )으로 豫想외의 많은 比率을 나타내고 있다. 둘째 : 腰部前彎角 集團別 運動能力 測定結果는 腰部前彎角이 큰 集團일수록 運動能力 遂行에 있어 意義있게 높은 差異로 나타났다. 셋째 : 腰部前彎角과 運動能力과의 相關關係에서는 서서 윗몸 앞으로 굽히기 ( S . T . F ) 가 r=.17로 거의 相關이 없는 것으로 記錄되었으며, 제자리 멀리 뛰기 ( S . B . J ) 는 r=.31로 낮은 相關을 나타냈다. 그러나 사이드 스텝 테스트 ( S . S . T ) 는 r=.47 버피 테스트 ( B . T ) 는 r=.62 스틱 테스트 ( S . T ) 는 r=.59로 매우 높은 相關이 있는 것으로 檢證 되었다. 넷째 : 腰部前彎角 5個 集團과 運動能力과의 變量分析 ( Analysis of Variance ) 結果는 서서 윗몸 앞으로 굽히기 ( S . T . F ) 에서는 F=1.03 ( P> .05 ) , 제자리 멀리뛰기 ( S . B . J ) 에서는 F=1.17 ( P> .05 ) 로써 意義없는 差를 나타냈으나, 사이드 스텝 테스트 ( S . S . T ) 는 F=3.77 ( P< .01 ) 버피 테스트 ( B . T ) 는 F=11.31 ( P< .01 ) , 스틱 테스트 ( S . T ) 에서는 F=6.33 ( P< .01 ) 로서 共히 1% 水準에서 매우 意義있는 差로 檢證되었다. This study aims to observe how the forward curved angle of a waist of human body influences the athletic ability. The students who are examined are the 134 boy students, second grade students who attends Dae Sung High School which lies in Eunpyung-gu, Seoul. And they are selected by random sampling. I measured the forward curved angle of a waist and divided angle groups into five groups. They are; 136°~140°, 141°~145°, 146°~150°, 151°~155°, 156°~160° And the test of athletic ability through five groups is limited standing trunk flexion of flexibility test, standing broard jump of power test, side step test of agility test and burpee test of muscular endurance test and stick test of balance test As the result, in the standing broad jump, side step test, burpee test, stick test the wider forward curved angle of a waist group is, the higher the achivement is. And in the standing trunk flexion test 151°-155° group is more excellent than the others as degree of 18.01 ± 3.69,136 -- 140° group is low record as a whole. The conclusions which are gained through the above results as follows; 1. In forward curved angle of a waist test 45 students (33.6%) of 151°--155° group among all 134 students show the most number of proportion and the group below 145° also shows unexpected much proportion as 34 students (25.4%) 2. As the measuring result of athletic ability in each forward curved angle of a waist group, the wider forward curved angle of a waist group shows the more significant difference in performing the athletic ability. 3. In the standing trunk flexion test, co-relation between forward curved angle of a waist and athletic ablility shows that it has little co-relation as r=.17 and standing broad jump test also has low co-relation as r=.31. But the others are tested as a very high co-relation, these are; side step test as r=.47, burpee test as r=.67, stick test as r=.59. 4. The result of analysis of variance between the five groups in forward curved angle of a waist and athletic ability has such an insignificant difference of 5% level as standing trunk flexion is F= 1.03 (P>.05) and standing broad jump is F=1.17 (P>.05). But the others are tested such a very significant difference of 1% level as side step test is F=3.77 (P<.05), burpee test is F= 11.31 (P<.01) and stick test is F=6.33 (P<.01)

      • 흰쥐에서 clomipramine에 의한 방광의 과활동성과 후근신경절 serotonin의 감소

        한동석 忠南大學校 大學院 2006 국내박사

        RANK : 247631

        Purpose: I postulated that depression associated with decreased 5-hydroxytryptamine (5-HT, serotonin) function might be associated with bladder overactivity. I examined the effects of 5-HT on bladder function and the change in expression of 5-HT of the L6 and S1 dorsal root ganglions (DRGs) in the clomipramine-induced rat model of endogenous depression. Materials and Methods: Wistar pups were divided into two groups, the clomipramine treated (CL) and the saline control (SC) group. Postnatal days from 8 to 21, each pup was injected with clomipramine hydrochloride (22.5mg/kg body weight) or an equal volume of saline, At 15 week of age, the voiding frequency study was assessed for 6 hours in metabolic cage and awake cystometrogram (CMG) was performed. DRGs were harvested at the L6 and S1 levels in all rats. The Immunofluorescent staining of the anti-5-HT antibody was performed. The intensities of 5-HT expression at the DRGs were scored using a confocal microscope and image analyzer. Results: CL rats voided more frequently than the SC rats at 15 week (3.80±0.37 per 6 hours in CL group and 1.40±0.24 per 6 hours in SC group, p<0.05). The awake CMG of the CL group showed decreased bladder capacity and micturition volume compared to the SC group. Also, intermicturition contractions were noted only in the CL group. Other urodynamic parameters including basal pressure, threshold pressure, micturition pressure and residual urine volume were not significantly different between CL and SC groups. In the L6 and S1 DRGs, 5-HT was more frequently expressed in the cytoplasm of the nerve cells in both groups. The CL group showed a weaker expression of 5-HT than the SC group. The relative densities of 5-HT in the CL group were significantly lower than those in the SC group (p<0.05). Conclusions: The clomipramine treated rats which had shown reduced levels of 5-HT exhibited the bladder overactivity. These findings Support the hypothesis that decreased 5-HT formation leads to idiopathic urge incontinence.

      • 디퓨저를 이용한 마이크로 펌프의 CFD 해석과 실험적 연구

        한동석 서강대학교 대학원 2003 국내석사

        RANK : 247631

        미립자에 민감한 체크 밸브형 마이크로펌프가 디퓨저.노즐을 이용하는 방식으로 대체됨에 따라 미립자를 포함한 유체를 작동유체로 사용하는 것이 가능해졌다. 특히 혈액과 같은 체액을 사용할 수 있게 되었으므로 마이크로 펌프의 의료분야로의 활용이 가능해진 것이다. 그러나 낮은 전압에서 원하는 유량과 효율을 얻기 위해서는 디퓨저와 노즐형상의 최적화가 필요하다. 디퓨저 형상을 이용한 마이크로 펌프에서 유량과 효율은 디퓨저 입, 출구의 단면적 비와 확대각, 그리고 디퓨저의 길이에 의해 결정된다. 본 연구에서는 수치해석과 실험을 통하여 디퓨저의 성능 특성을 알아보았다. 수치해석 결과는 디퓨저의 입구 폭, 확대각 길이에 있어서 각각이 최대의 효율을 가지는 최적값이 존재하는 것으로 나타났다. 특히, 디퓨저의 입구폭과 확대각은 디퓨저의 길이에 비해 효율에 더 큰 영향을 미치는 것으로 해석되었다. 그리고 순유량은 중앙 챔버의 크기에 크게 영향을 받지 않았다. 하지만 중앙 챔버의 크기가 지나치게 작을 경우에는 좌, 우 디퓨저에서 중앙으로 들어오는 유량의 간섭으로 인해 순유량은 감소할 것으로 예측된다. 실험은 3개의 마이크로 펌프에 한하여 수행되었다. 실험용 마이크로 펌프는 수치해석 결과를 검증하기 위해 디퓨저의 입구폭, 확대각을 다르게 하여 설계, 제작하였다. 그러나 제작의 마지막 공정에서 5개의 시편은 파손되었다. 때문에 실험은 3.15°, 18.9°, 25.2° 의 확대각을 가지는 디퓨저 형상의 마이크로 펌프에 한해만 수행하였다. 전체 유량은 디퓨저의 확대각이 증가함에 따라 역시 증가했지만 순유량에 있어서는 디퓨저의 확대각이 18.9°일 때 최대로 나타났다. 디퓨저의 확대각이 지나치게 작은 경우에는 유속의 적은 감속과 큰 마찰 손실로 인해 압력 회복이 작아지고, 확대각이 너무 큰 경우에는 separation이 커지므로 디퓨저의 성능이 감소하는 것으로 판단된다. 실험 결과의 경향을 보면 수치해석 결과에서 예측된 디퓨저의 확대각이 12.6°근처에서 최대 성능을 가질 것으로 예측된다. 그리고 펌프 모드에서의 전체 유량은 서플라이 모드에서의 전체 유량보다 항상 큰 것으로 보아 서플라이 모드시 중앙 챔버에서 양쪽 디퓨저로 인한 간섭 효과가 실제로 존재하는 것으로 판단된다. Substituting particle-sensitive check-valves in micropumps by diffuser/nozzle elements enables the handling of particle-containing fluids. Medical applications, such as handling of cell fluids like blood, become possible. In oder to achieve reasonable net flows and efficiencies for low power consumption, the diffuser/nozzle elements have to be optimized. The net flows and efficiencies of the diffuser structures depend on the ratio of diffuser outlet to inlet cross-sectional area, the taper angle, and the diffuser length. In this research, the characteristics of the diffuser were studied by simulation and experiment. In the numerical simulation, it was found that there exist optimum values that have maximum efficiency in diffuser width, taper angle and length. The diffuser width and taper angle showed the greater effect than the diffuser length. The net flow rate was not significantly influenced by the size of the middle chamber. However, if its size is too small, the net flow rate is expected to decrease because of the interference between two inflowing streams. Three micropumps were manufactured. To verify the simulation results sight specimens with different taper angles and throat width were designed and put to the manufacture. However, at the final stage, five samples were broken. Therefore, the experiments were carried out for three specimens with different taper angles(3.15°, 18.9° and 25.2°). The total flow rate was increased with the taper angle. However, the net flow rate was found to be the greatest for the micropump with the taper angle of 18.9°. If the taper angle is too small, pressure recovery is not enough because of insufficient flow deceleration and larger friction loss. If the taper angle is too big, the separation of the flow reduces the performance of the diffuser. From the trends of the experiments it is expected that the diffuser would show the best performance near the taper angle of 12.6° at which the result of numerical simulation was the best. It was also found that the total flow rate of pump mode was bigger than that of the supply mode which indicates that there exists an interference in the middle chamber at the supply mode.

      • 한국외환시장의 문제점 및 육성방향에 관한 연구

        한동석 단국대학교 1993 국내석사

        RANK : 247631

        우리나라의 外換市場은 1970년 9펄 14일 韓國銀行內에 外換交換室이 設置됨으로써 市場의 形態를 갖추었으며 對外去來規模의 擴大, 外換業務取扱金融機關의 增加, 換率制度의 改編, 先物換制度의 導入과 鑛充 等 與件의 變化와 制度改善에 힘입어 꾸준히 發展하여 왔다. 한편, 1989년 經常收支의 흑자전판을 계기로 外換市場과 밀정한 관계가 있는 金融, 資本市場에 대한 自由化, 國際化의 필요성과 요구가 증대되면서 우리나라 外換市場의 환경도 변화를 맞게 되었다. 특히 금융부분내에서는 金融機關의 預貸市場을 중심으로 한 狹義의 금융시장 뿐만 아니라 資本市場과 外換市場의 자유화가 서로 맞물려 있는데 이는 금융시장과 자본시장의 자금의 대치시장이라는 점에서 기본적으로 동일한 기능을 수행하며 金融, 資本市場의 대외거래 자유화를 위해서는 外換市場의 자유화가 필수적이기 때문이다. 이러한 상황하에서 앞으로 대외거래를 원활히 및 받침하고 경상수지의 적정화를 기하며 金融, 資本市場의 개방을 효과적으로 추진하는 한편 金融政策의 효율을 높이기 위한 제도적 장치의 일환으로 外換市場의 育成이 시급한 과제로 대두되고 있다. 그러나 국내 外換市場은 그동안 꾸준하게 발전은 보여왔지만 아직까지 市場規模가 零細하고 거래상품도 다양하지 못하며 銀行間市場이 빈약한 점 등 낙후상태를 벗어나지 못하고 있다. 이러한 것들은 근본적으로 換率의 價格機能 未洽, 量的 外換規制의 지속과 원화의 交換性不認定 등에 超因한다고 볼 수 있다. 본 硏究에서는 韓國 外換市場의 一般論 및 現況을 바탕으로 發展을 저해하고 있는 문제점 및 이에 대한 육성방향을 제시해 보는데 그 목적이 있다. 이러한 諸問題點과 구체적인 育成方向에 대해서 要約해 보면 다음과 같다. 韓國外換市場의 問題點을 살펴보면 다음과 같다. 첫째. 韓國外換市場은 1965년 5철 실질적인 國內外換市場이 형성된 이래 최근까지 부분적인 外換規制緩和政策을 실시하였으나, 아직 선진국의 外換市場에 비해 현저히 미성숙되어 있는 실정이다. 韓國外換市場의 미성숙에 대한 주요인으로는 ① 市場의 영세성, ② 거래 관련법 및 각종 규제의 상존, ③ 거래되는 金融商品의 한정, ④ 은행간 시장(Inter-Bank Market)의 활동부진. ⑤ 국제외환시장과의 구조적인 격차 등을 지적할 수 있다. 둘째, 韓國外換市場을 둘러싸고 있는 경제여건, 外換市場을 직접 규제하고 있는 법규제도, 의판수급계획, 外國換去來擔保規制, 의환집중제 및 대외결제기간의 제한 등의 問題點등을 들 수 있다. 셋째, 外換市場規模의 영세성과 外換需給不均衡을 지적할 수 있다. 즉, 우리나라의 外換市場은 外換集中制度, 資本去來의 統制, 先物換去來 및 現物換去來의 規制 등 各種 制度的 規制가 상존하고 있어 규모의 영세성은 물론 外換需給不均衡을 완전히 시정하지 못하고 있는 실정이다. 넷째, 長期的인 側面에서 원화의 國際化의 基本要件이라 할 수 있는 短期金融市場의 미발달도 은행의 短期外貨資金 需給不均衡을 초래하고 있다. 다섯째, 外換去來仲介를 전문으로 하는 인혀의 不足은 國內外換市場의 효율성을 저해시키고 있다. 특히 정보처리 시스템의 부족은 가장 큰 장애요인으로써 조속히 改善이 필요한 실정에 있다. 다음으로. 韓國 外換市場의 향후 發展方向을 요약하면 다음과 같다. 첫째, 外國換銀行에 대해서는 顧客의 외환수요에 적극적으로 응할 수 있도록 외환포지션규제를 단계적으로 완화해 나가야 한다. 둘째, 換率決定에 있어서도 外換需給事情이 보다 충실히 반영될 수 있도록 은행간 매매율의 기준이 되는 中心換率의 변동허용폭을 확대하는 한면 外國換銀行의 對顧客賣買率은 완전히 자율화하여야 할 것이다. 세째, 대외거래 확대와 더불어 外換去來規模가 크게 늘어나는 가운데 은행간 매매율의 자유화폭 확대로 환율변동폭도 커질 것으로 예상됨에 비추어 시장참가자들이 이에 대비할 수 있도록 先物去來의 實需原則을 緩和 또는 단계적으로 폐지해야 한다. 넷째, 外換·資本市場의 전면적인 개방과 金利自由化 등에 대비하기 위해서는 先物去來所와 淸算會社를 설립하여 先物去來의 活性化를 이룩해야 할 것이다. 따라서 비 거주자에 대해 경상수지를 동해 취득한 원화의 입금 및 지급을 위한 "國際원計定"의 개설을 허용하고 자본거래의 원화표시계약을 허용하여 원화의 國際化도 꾸준히 추진해 나가야 한다. 마지막으로 보다 성숙한 外換市場 下部構造의 構築을 위해서는 외환중개제도의 개선 및 외환거래 결제일자의 면경이 가장 시급한 현안과제이다. 현행 금융결제원 자금중개실을 통한 외환중개제도는 현재와 같이 外換·자본거래가 규제되고 원화의 국제화가 이루어지지 않는 여건하에서도 중개 비용을 절감하는 둥 나름대로 효율적인 중개기능을 수행하고 있는 것으로 생각된다. 그러나 향후 外換 및 資本去來외 자유화 추진으로 外換去來 규모가 급속히 중대되고 외환시장의 국제화가 이루어지는 상장에서는 현재의 外換仲介制度의 개편이 불가피한 실정이다. 궁극적으로 자유변동환율제도가 도입되는 1996~97년에는 주요 先進國과 갈은 복수 브로커제도로 전환하는 것을 목표로 외환중개제도를 점진적으로 개선해 나가야 한다. 결론적으로 우리 經濟가 자율화, 국제화가 가속화되고 구조적으로 선진화되는 過程에서 韓國外換市場의 발전을 위하여 가장 중요한 것은 정부 및 外換市場의 참가자들이 問題點을 인식하고 韓國外換市場의 육성을 추진하여 국내금융시장의 개방으로 인란 손실을 최소화하고 장기적으로 國際競爭力을 갖추어야 한다. 또한 國際競爭力을 갖춘 國際金融機關들의 경쟁터전이 될 國內金融市場과 해외에서 形成될 수도 있는 유로원시장에서 원화의 換率調整機能 등 모든 外換部門에 있어서 주도적인 役割을 감당할 수 있도록 만반의 준비를 해 나가야 할 것이다.

      • Extreme Contour Point를 이용한 회전 이미지 각도 검출 알고리즘의 FPGA 설계 : FPGA Implementation of Novel Rotation Angle Detection Algorithm using Extream Contour Point

        한동석 청주대학교 2017 국내박사

        RANK : 247631

        In this paper, we propose a novel algorithm with fast speed and low cost using Extreme Contour Point (ECP) to detect the angle of rotated high definition (HD) images is proposed. it is designed by rotation invariant feature of overall images that can be applied to correct the rotated images for real time application. There are two advantages for ECP algorithm, namely compatibility to the images in pre-processing by using Sobel edge process for pattern recognition. While the other one is its simplicity for the rotated angle detection with cyclic shift of two 1⨉n matric sets between original image and rotated image. The initial input images can be concisely assembled in its edge as their significant features which are being represented by Sobel edge based on gray scale form. And, after a binary conversion of the extracted image, an additional filtering needs to make a rotation invariant feature is called as the ECP. There are three schemes on the ECP according to extraction method and its inherent variables such as ECP(Ɵ), ECP(r2,Ɵ) and ECPAM(r2,Ɵ). ECP(Ɵ), menas that the feature of its components depends on only angle Ɵ, However, could be vulnerable to a noise which represents in changed rotation axis from the original rotation axis. In real time process of moving camera, the rotation axis might be possible to infinitesimally shift for frame to frame. On this wise, ECP(r2,Ɵ) is designed to form relatively non-sensitive about infinitesimal variation of rotation axis by comparing ECP(Ɵ), that is expressed not just only the features of angle Ɵ but the square of radius r2. Lastly, ECPAM(r2,Ɵ) is improvement version in terms of accuracy about rotated angle, is derived from ECP(r2,Ɵ) with each components matched to angles from 0 degree to 360 degree. Through the three ECP scheme, rotation angle detection is evaluated with various 100 samples, and its detectable angle is limited to 10 degree, 5 degree and 20 degree for ECP(Ɵ), ECP(r2,Ɵ) and ECPAM(r2,Ɵ), respectively. Especially, ECPAM(r2,Ɵ) uses look up table (LUT) to match the angle. Moreover, it is additively designed to optimize LUT by reducing the extraction radius from r=57 to r=45. This result gives LUT reduction effect of 37.7% in comparison with r=57. And then, relative speed is simulated by using Matlab R2012a based on Intel Core i5 3.3GHz CPU environment, that the process speeds of ECP(Ɵ), ECP(r2,Ɵ) and ECPAM(r2,Ɵ) are 7ms, 15ms, and 20ms, respectively. While rotation matrix method based on CORDIC is 143ms. Finally, through optimized hardware design based on field programmable gate array (FGPA) about proposed three ECP versions, it was evaluated by XC7Z020 xc7z020-3clg400 FPGA board by using xilinx 14.2 tool. Coordinate rotation digital integrated computation (CORDIC), is a typical algorithm to estimate rotated angle between points, is used as benchmark algorithm. By comparing our proposed algorithms and the benchmark, the benchmark, ECP(Ɵ), ECP(r2,Ɵ), and ECPAM(r2,Ɵ) are confirmed to have similar Max. operation frequency of 242MHz, 280MHz, 229MHz, and 255MHz, respectively. However, it is verified to have high performance result in terms of the hardware cost, ECP(Ɵ) is much better than the benchmark with low cost reduction of resister and LUT of 0.08% and 0.5%, respectively. And ECP(r2,Ɵ) and ECPAM(r2,Ɵ) are also much better than the benchmark with low cost reduction of resistor and LUT of 0.10% and 1.00%, and 0.18% and 1.48%, respectively. From this experiment result, the proposed ECP algorithms are proven to be feasible enough to in real time application. And, ECP(Ɵ) is highly efficient with high speed and much low cost in the system is not changed to rotation axis. While ECPAM(r2,Ɵ) is optimized to the system with very improved accuracy.

      • 土地區劃整理事業의 問題點과 改善方向에 關한 硏究 : 光州 第8地區를 中心으로

        한동석 全南大學校 1991 국내석사

        RANK : 247631

        土地區劃整理事業의 導入 科程과 土地의 事業施行 實態를 開館해 보고 現行의 土地區劃整理事業의 問題點과 改善 方向을 硏究 하였다. 이 硏究를 수행하는 方法으로는 土地區劃整理事業에 대한 基礎理論을 바탕으로하여 光州市 第8土地區劃事業地區를 事例로 分析하였다. 그 結果 다음과 같은 事實을 알게 되었다. 1. 換地方式을 面積主意에서 評價主意로 轉換하여 公益과 私益이 調和를 가져오도록 地域에 맞게 적절한 減少率을 적용하여 負擔과 換地가 합리화되어야 한다. 2. 土地區劃整理事業分野에 從事하는 實務者는 土地區劃整理技法을 充分히 熟知한 專門技術 人力이어야 하며 그를 위해 각 大學 및 聯關機關은 都市計劃敎育 등을 통한 專門人力을 養成하여야 한다. 3. 土地所有者가 換地計劃에 參與할수 있는 制度的인 補完裝置가 要求되며 事業資金 마련을 위한 替費地는 事業 初期에 매각하는 성급함에서 벗어나 事業이 완공되는 時期에 매각하여 宅地價의 상승과 투기를 방지하여야 한다. 4. 現行法의 保留地와 替費地 確保의 制限規程을 緩和하고 集團으로 하여 無主宅 庶民의 共同 國民住宅을 供給함은 물론 土地利用率을 增進시켜야 한다. Adequate supply of residential land has emerged as one of major urban problems in metropolitan ares in accordance with the process of urbanisation and urban growth. Among the techniques for residential land supply, the land readjustment project has commonly used for its, conveniences and/or merits in terms of the strengthening of land use density, the easy acquisition of land for public facilities, and the relatively low financial needs for the project, etc. Although its advantages, it hasn't worked properly as expected owing to the problemes arising from both in institutional and in technical aspects. The purpose of this study is to identify the problems of land readjustment project and their countermeasure for the efficient (supply) of residential land and the improvement of land use capacity in urban areas. The eighth district project which was complected most recentely in Kwangju was selected as target area for this study. Major problems identified in this study can be summarised as follows ; unbalanced distribution of windfall profit in the project, relatively low density in land use, and low citizens participation in planning and implementation of the project, etc. As a consequence, following measures are urgently needed for the efficient implementation of the project. 1. The land readjustment project should be implemented based on area specific characteristics. 2. The focus of the project should be placed on the enhancement measures of land use density with the consideration of control measures for land speculation around the project area. 3. It is generally regarded that citizen's participation is very important for successful implementation of the project. In conclusion, furture direction of land readjustment project should be considered in the light of the efficient supply of residential land and the improvement of land use capacity in metropolitan area.

      • 고효율 박막 트랜지스터를 위한 산화아연 기반의 산화물 반도체 개발

        한동석 한양대학교 대학원 2017 국내박사

        RANK : 247631

        최근, 평판 디스플레이 (Flat Panel Display (FPD))는 panel의 박막화, 사이즈의 대면적화뿐만 아니라 해상도에 있어서도 기존의 Full High Definition (FHD, 1920 x 1080 pixels)에서 Ultrahigh Definition (UHD, 3840 x 4320 pixels) 및 Super Hi-Vision (SHV, 7680 x 4320 pixels)급 이상으로 고 해상도 panel에 대한 개발의 요구와 관심이 높아지고 있다. 특히 77인치 이상의 대형 Liquid Crystal Display (LCD) panel에서 high resolution (>UHD) 및 high frequency (>240 Hz)의 성능을 구현하기 위해서는 high field-effect mobility (μFE, > 10 cm2/Vs), low resistive capacitive (RC) delay 및 bias나 illumination에 대한 구동 소자인 박막 트랜지스터 (TFT, Thin-Film Transistor) 의 신뢰성 확보가 요구된다. TFT의 채널층으로서 비정질 실리콘 (a-Si, Amorphous Silicon) 또는 저온 다결정 실리콘 (LTPS, Low-Temperature Polycrystalline Silicon) 등이 고려되어 왔다. 그러나, a-Si TFT 전하 이동도가 1.0 cm2/Vs 이하에 불과하기 때문에 고이동도가 요구되는 대면적, 고해상도 응용제품으로의 적용의 한계에 도달하고 있다. a-Si TFT의 한계를 극복하기 위해서 연구 개발된 LTPS TFT의 경우 80 cm2/Vs 이상의 전하 이동도 덕분에 초고해상도 제품 구현이 가능하기 때문에 고급 패널을 구현이 가능하다. 그러나 LTPS 기술의 경우 결정화 공정과 채널/전극 오믹 접합 (Ohmic contact) 구현을 위한 이온 주입에 따른 제조원가 상승과, 결정화 공정 시간이 오래 걸려 대형 TFT 공정 생산성이 현저히 낮은 한계점을 안고 있다. 이를 극복하기 위해, 2000년도 중 후반부터 산화물 화합물 반도체를 TFT 채널층에 적용하는 연구가 활발히 진행되고 있으며, 특히 이에 후보로 거론되는 물질로는 산화아연 기반의 물질로 IGZO (Indium-Gallium-Zinc-Oxide)가 연구의 주를 이루고 있는 상황이다. 하지만 IGZO 산화물 반도체 역시 기술의 원천 특허 및 재료의 가격적 측면 등의 문제점을 안고 있으며, 산화물 반도체를 기반으로 제작되는 TFT의 경우 아직까지 소자의 이동도 개선 및 장기 신뢰성 확보 등의 단점을 쉽게 극복하지 못하고 있는 실정이다. 특히, bias 또는 illumination에 대한 신뢰성 확보 및 RC delay 해결을 통해 고효율의 산화아연 기반의 반도체 개발은 극복해야 할 과제가 여전히 많이 남아 있는 분야라고 할 수 있다. 따라서, 본 연구에서는 이러한 배경을 바탕으로 ZnO 기반 산화물 반도체를 제작하여 고이동도 및 고신뢰성 확보를 통한 고효율의 TFT를 개발하는데 그 목적을 뒀다. 이를 위해 우선, DC 마그네트론 스퍼터링 장비를 이용하여 ZnO TFT를 제작, 최적화하였고 산소 플라즈마 처리를 통해 채널과 SiNx 절연층 계면의 결함을 줄여 그 특성을 향상시킬 수 있었다. 또한, S/D 저항을 줄이기 위해 여러가지 금속을 S/D으로 도입하였고, TFT S/D series resistance, intrinsic field effect mobility (μFEi), transfer length (LT), and effective contact resistance (RCeff)를 추출하여 반도체층과 S/D 사이의 관계를 분석했다. ZnO TFT는 외부에 노출됐을 경우, 공기 중의 수분이나, 산소에 의해 특성이 변하게 되고 이를 방지할 수 있는 passivation layer가 필수이다. Passivation layer 적용을 통한 효과를 알아보기 위해 PEALD로 Al2O3, TiO2 박막을 증착하여 passivation layer 특성을 파악했고, TiO2, Al2O3 단일막 구조보다는 TiO2/Al2O3의 다층막 구조 순으로 passivation layer 특성이 우수해지는 것을 파악했다. 연구된 passivation layer를 TFT위에 증착하였고, 그 특성을 살펴본 결과, TFT의 전이특성 변화가 ALD 증착공정 중의 플라즈마에 의한 damage에 의해 발생한 것을 알아냈으며, 우수한 수분투과방지특성을 지닌 보호막을 TFT에 적용했을 때 소자특성을 향상 시킨다는 것을 파악했다. 또한 bias stress에 의한 동작 전압의 변화는 단순한 전자 이동에 의한 것이 아니라, 이온화된 H2O가 반도체 표면에서 absorption/desorption 됨에 따라서도 변화하는 것을 알아냈다. 최종적으로 본 연구에서는 IGZO TFT에 전자빔(electron beam)을 조사하여 S/D contact resistance 특성 향상을 통해서 신뢰성 향상과 소자 특성을 향상시키는 시도를 해보았다. S/D region에 국소적으로 전자빔 조사를 한 IGZO TFT의 경우, 산소결핍에 의해서 전기전도도가 향상될 뿐만 아니라, 표면거칠기의 증가로 인해 전자빔 조사 후 증착된 Cu와 IGZO 채널층과의 결합을 증가시켜 S/D contact resistance가 감소한 것을 알 수 있었고, TFT의 소자 특성 향상을 관찰할 수 있었다. 특히 본 실험을 통해 TFT의 신뢰성은 채널/전극의 contact resistance에 의해 그 특성이 좌우된다는 것을 파악할 수 있었다. 이를 통해서 전자빔 조사의 에너지와 조사선량을 적절하게 조절함에 따라서 IGZO 채널층과 metal electrode의 contact resistance 감소를 통한 성능 향상이 가능하다는 것을 밝혀 냈다. 본 연구에 사용된 저 저항의 Cu S/D contact resistance, 낮은 수분투과율의 passivation layer에 적용 가능한 전자빔 조사를 통해서 제작된 IGZO TFT는 향후, 대면적, 고해상도의 LCD 패널의 제작에 있어 우수한 소자 특성뿐만 아니라 공정 단축, 생산성의 향상 및 제조원가의 절감 등의 효과를 기대할 수 있다.

      • 중국 도시빈민 정책과 실태 연구

        한동석 한국방송통신대학교 대학원 2021 국내석사

        RANK : 247631

        사회주의 계획경제 시기 중국에 도시빈민은 존재하지 않았었다. 그러나 중국 정부의 정책 전환에 따른 시장경제의 도입은 사회주의 계획경제 시기에는 없던 도시빈민의 출현을 가져왔다. 중국의 도시빈민은 크게 도시의 하강(下岗) 실업자와 농촌 출신 신노동자들로 구성되어 있다. 중국의 도시빈민 발생 원인은 중국 정부의 정책 전환에서 비롯되었다. 따라서 중국 정부는 도시빈민의 부정적인 모습이 주목받길 원하지 않는다. 그러므로 공식적인 도시빈민 실태 연구와 관련 자료는 매우 빈약한 것이 사실이다. 이 논문은 공식 문헌 연구의 한계를 극복하기 위해 사회적 현실을 다른 방법으로 재현한 영화, 소설 그리고 조사 보고서를 채택해 분석한다. 영화 〈안양의 고아(安阳婴儿)〉는 하위 계층인 농민공, 실직자, 범죄자 등 압축 성장의 주변인들이 도시에 정주하지 못하는 가족의 해체를 재현하고 있다. 선봉 소설의 하나인 『뱀이 어떻게 날 수 있지(蛇为什么会飞)』는 주류에 속하지 못하고 밀려나 밑바닥 인생을 사는 도시빈민층의 생존 모습을 사실적으로 묘사하고 있다. 이를 통해 당·국가의 정책 전환에 따라 새롭게 등장하는 중국의 도시빈민들의 삶을 직면할 수 있다. 그리고 조사 보고서는 최근 도시빈민 거주지역에 연구자가 직접 잠입해 생활하며 기록한 『岂不怀归 : 三和青年调查』를 선정했다. 이 보고서는 90 허우, 00 허우가 대부분인 신세대 도시빈민의 삶과 그들의 독특한 빈곤 문화를 객관적으로 서술하고 있다. 공식 문헌자료와 영화, 소설, 조사 보고서 등을 통해 확인한 오늘날 중국의 도시는 도시빈민들에게 있어서 희망과 꿈의 풍요로운 공간이 아니고 결핍과 빈곤 그리고 차별과 배척의 공간이었다. 도시빈민들은 그곳에서 분노, 좌절, 절망의 나날들을 보내며 그들만의 빈곤의 특수문화(subculture)를 만들어가고 있다. 반면에 당·국가의 빈민구제 정책 목표는 빈곤 구조보다 사회 안정유지(维稳)에 중점을 둔 것으로 지방정부가 주체가 된 지역적 정책 특성을 가지고 있다. 또한 정책 집행 기구의 불완전함과 업무 수단의 비전문화로 인한 다양한 문제의 발생도 해결해야 하는 과제이다. 따라서 공정한 소득분배와 공평한 희생의 안배와는 거리가 있다. 더욱이 당·국가는 도시빈민 문제를 근본적이고 긍정적인 방향으로 개선하기보다는 사회에 대한 감시와 통제를 통해 사회적 갈등을 해결하려 한다. 이를 위해 치안과 관련한 공안 기구들의 힘을 늘리고 이에 대한 당의 통제를 강화하고 있다. 따라서 도시빈민 실태는 당·국가의 의도적인 외면, 이에 따른 중산층의 무관심 그리고 자신을 표현할 기회가 없는 도시빈민들의 한계에 가려져 있다. 이러한 상황에서 있는 그대로의 도시빈민 실태의 이해를 위한 노력은 사회적 양심의 각성을 위한 첫걸음이라는 의미가 있다. 각성된 사회적 양심만이 사회적 합의를 유도하고 진정성 있는 도시빈민 구제 정책 수립과 시행의 마중물이 될 수 있을 것이다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼