http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임인숙,김영오,표애리,설효정,권용훈,김형일 대한치과재료학회 2012 대한치과재료학회지 Vol.39 No.1
소량의 금, 인디움 및 아연을 함유한 치과용 Ag-Pd-Cu계 합금의 석출경화 현상을 규명하기 위하여 시효처리에 따른 경도 변화, 상 변태, 미세구조 변화 그리고 원소분포를 조사하여, 다음과 같은 결과를 얻었다. 용체화처리된 시편은 Ag-rich α 기지, 크고 작은 크기의 CuPd β 입자형 구조 그리고 Ag-rich α 층과 CuPd β 층으로 된 층상구조로 이루어져 있었다. 경도의 상승은 Ag-rich α 기지로부터 Cu-rich 상의 석출에 기인하였다. 모상인 Ag-rich α상이 완전히 분해되기 전에 Cu-rich 상의 침상구조가 입계에 출현하였고, 이로 인하여 경도의 지속적인 상승이 제지되었다. 미세한 침상구조의 입계 형성, 입내로의 성장 및 조대화가 기지와 석출물 사이의 상간 계면을 감소시켜 연화를 초래하였다. 다양한 크기의 CuPd β 입자형 구조는 경도 변화에 영향을 미치지 않았다.
강민지,이상화,표애리,조미향,설효정,권용훈,김형일 대한치과재료학회 2010 대한치과재료학회지 Vol.37 No.4
치과용 Ag-Au-Cu-Pd-Zn-Ir 합금의 상 분리와 규칙화의 이중 기구에 의한 시효경화를 규명하기 위하여 경화 거동, 상 변태, 미세 구조의 변화를 조사하여, 다음과 같은 결과를 얻었다. 시효 초기에 경도는 비교적 완만하지만 꾸준히 상승하여 최고치에 도달하였고, 그 후 경도는 급격히 하강하다가 서서히 하강했다. 시효 초기의 완만한 경도 상승은 α0 기지에서Ag-Au-rich α1 상과 준안정상인 AuCu I′상의 핵 생성과 성장에 기인하였다. 그 후에 일어난 꾸준한 경도 상승은 준안정상인 AuCu I′상이 안정상인 AuCu I 상으로 변태되는 것에 기인하였다. 결정 입계에서 그리고 이어서 입내에서 생성되는 층상조직이 격자 뒤틀림을 효과적으로 해소하여 연화를 초래하였다. 입내에서 생성된 미세한 층상 조직의 조대화가 입계에서 생성된 층상 조직의 조대화보다 더 뚜렷하게 경도 하강을 유발하였다.
Bulk-fill 복합레진과 전통적 복합레진의 물성비교
노태환,송은주,박소영,표애리,권용훈,김지연,김신,정태성,Noh, Taehwan,Song, Eunju,Park, Soyoung,Pyo, Aeri,Kwon, Yonghoon,Kim, Jiyeon,Kim, Shin,Jeong, Taesung 대한소아치과학회 2016 大韓小兒齒科學會誌 Vol.43 No.4
치아우식증을 치료할 때 가장 많이 사용되는 수복재료 중 하나는 레진이다. 하지만 레진은 중합수축, 긴 작업시간, 수분 및 오염에 민감하다는 단점들이 존재하고 어린이를 치료할 때 더 두드러진다. 이러한 단점들을 해결하기 위해 bulk filling이 나타나게 되었고, 이를 가능하게 하는 bulk-fill 복합레진이 개발되었다. 본 연구의 목적은 전통적 복합레진과 bulk-fill 복합레진의 물성을 다양한 방법으로 평가 및 비교하기 위함이다. 전통적 복합레진 3 종류(Filtek Z-350 (Z-350), Unifil Flow (UF), Unifil Loflo Plus (UL)), bulk-fill 복합레진 2종류 (SureFil SDR flow (SDR), Tetric N-Ceram bulk fill (TBF))를 사용하였다. 광중합기는 light-emitting diodes를 사용하였고, 한번 중합할 때 20초간 시행하였다. 재료들의 미세경도는 비커스경도기로 측정하였고, 중합도 측정은 Fourier transform infrared spectroscopy을 사용하였다. 중합수축량은 컴퓨터로 제어되는 linometer를 이용하였다. 굴곡강도 및 굴곡계수는 3점 굽힘 시험법으로 측정하였고, 압축강도 및 압축계수와 함께 Universal testing machine을 이용하여 측정하였다. 통계분석은 ANOVA를 사용하였고, Scheffe의 사후검정을 하였다. 미세경도는 상면에서 Z-350이 가장 높은 값을 나타냈고, 하면은 TBF가 높은 값을 나타냈으나 UL은 상하면 모두에서 가장 낮은 값을 보였다. 상면과 하면의 미세경도 값의 비는 SDR, TBF가 높았다. 중합도는 bulk-fill 복합레진과 유동성 복합레진 상하면 모두에서 높게 나타나고, Z-350는 상하면 모두에서 55% 이하로 나타났다. 압축강도는 Z-350이 가장 높았으며 SDR이 낮게 나타났으나 UL과는 통계학적으로 유의하게 차이는 보이지 않았다. 압축계수는 Z-350이 높게 나타났고, UL이 가장 낮았다. 굴곡강도 및 굴곡계수는 Z-350이 가장 높았다. UL은 굴곡강도 및 굴곡계수 모두 가장 낮게 나타났다. UL이 가장 높은 중합수축을 보였고, Z-350이 가장 낮은 중합수축 값을 나타냈다. 유동성 복합레진이 비유동성 복합레진보다 중합 수축 양이 많았다. 결론적으로 bulk-fill 복합레진의 물성은 전통적 복합레진보다 떨어지지만 bulk filling할 때 중요한 상하면의 미세경도비 및 중합도는 높게 나타나 어린이의 치아우식증 수복치료 시 도움이 될 수 있을 것으로 사료된다. Composites are the most useful restorative material. However, composites have some disadvantages such as polymerization shrinkage, long working time, and susceptibility to water and contamination, which are stood out more especially when treating children. To solve these problems, bulk-fill composites have been developed. The aim of this study is to compare mechanical properties of bulk-fill and conventional composites. Bulk-fill composites (SureFil SDR flow (SDR), Tetric N-Ceram bulk fill (TBF)) and conventional composites (Filtek Z-350 (Z-350), Unifil Flow (UF), Unifil Loflo Plus (UL)) were used. The Vickers hardness tester was used to measure the microhardness of materials, and Fourier transform infrared spectroscopy was used to measure the degree of conversion. Polymerization shrinkage was measured by using a linometer. Flexural and compressive properties were measured by using the universal testing machine. Data were statistically analyzed by ANOVA and Scheffe's post hoc test. The level of significance was set to p < 0.05. Most conventional composites showed higher microhardness than bulk-fill composites. However, bulk-fill composites showed a higher top/bottom microhardness ratio than conventional composites. Bulk-fill composites showed a higher top/bottom degree of conversion ratio than conventional composites. The polymerization shrinkage was highest in UL and lowest in Z-350. The polymerization shrinkage of flowable composites was higher than that of non flowable composites. The compressive properties were highest in Z-350 and lowest in SDR and UL. In terms of flexural properties, Z-350 was the highest. However, none of the bulk-fill composites exhibited mechanical properties as good as those of conventional composites. Nonetheless, the ratio of microhardness and degree of conversion, which are important properties of bulk filling, were higher in bulk-fill composites. Therefore, the bulk-fill composites might be considered suitable restorative materials in pediatric dentistry.