http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
AMOLED 제조공정에 사용되는 Fine Metal Mask 용 얇은 Invar 합금의 진동자를 이용한 펨토초 레이저 응용 홀 드릴링
최원석,김훈영,신영관,최준하,장원석,김재구,조성학,최두선,Choi, Won-Suk,Kim, Hoon-Young,Shin, Young-Gwan,Choi, Jun-ha,Chang, Won-Seok,Kim, Jae-Gu,Cho, Sung-Hak,Choi, Doo-Sun 한국금형공학회 2020 한국금형공학회지 Vol.14 No.3
One of display trends today is development of high pixel density. To get high PPI, a small size of pixel must be developed. RGB pixel is arranged by evaporation process which determines pixel size. Normally, a fine metal mask (FMM; Invar alloy) has been used for evaporation process and it has advantages such as good strength, and low thermal expansion coefficient at low temperature. A FMM has been manufactured by chemical etching which has limitation to controlling the pattern shape and size. One of alternative method for patterning FMM is laser micromachining. Femtosecond laser is normally considered to improve those disadvantages for laser micromachining process due to such short pulse duration. In this paper, a femtosecond laser drilling for thickness of 16 ㎛ FMM is examined. Additionally, we introduce experimental results for controlling taper angle of hole by vibration module adapted in laser system. We used Ti:Sapphire based femtosecond laser with attenuating optics, co-axial illumination, vision system, 3-axis linear stage and vibration module. By controlling vibration amplitude, entrance and exit diameters are controllable. Using vibrating objective lens, we can control taper angle when femtosecond laser hole drilling by moving focusing point. The larger amplitude of vibration we control, the smaller taper angle will be carried out.
극초단 펄스 레이저를 사용한 유리 내부의 필라멘테이션에 대한 실험적 연구
최원석,윤지욱,김주한,최지연,장원석,김재구,최두선,황경현,조성학,Choi, Won-Suk,Yoon, Ji-Wook,Kim, Joohan,Choi, Jiyeon,Chang, Won-Seok,Kim, Jae-Goo,Choi, Doo-Sun,Whang, Kyoung Hyun,Cho, Sung-Hak 한국레이저가공학회 2013 한국레이저가공학회지 Vol.16 No.1
We have successfully formed filament inside of a transparent soda-lime glass using a Ti:sapphire based femtosecond laser. To make filament form, keeping the laser intensity higher than critical intensity is essential. Also each of the machining parameters plays an important role for the formation of filament. In this paper, we study what parameter can possibly influence for formation of filament, and we introduce an application using filamentation by femtosecond laser for transparent material.
그리드 네트워크에서 종단간 전송 지연 향상을 위한 bottleneck 링크 대역폭 측정 알고리즘
최원석,안성진,정진욱,Choi, Won-Seok,Ahn, Seong-Jin,Chung, Jin-Wook 한국정보처리학회 2003 정보처리학회논문지 C : 정보통신,정보보안 Vol.10 No.7
본 논문은 그리드 네트워크의 패킷 지연시간단축을 위한 병목 링크 대역폭 측정 알고리즘을 제안하고자 한다. 병목 링크 대역폭 측정방법으로 packet pair 알고리즘과 Paced Probes가 있으나 이들은 pacer 패킷으로 cross traffic의 영향을 줄이면서 Paced probe 패킷들이 링크를 지날 때 발생하는 시간 차이를 이용하여 병목 링크 대역폭을 구한다. 그러나 경로상의 병목 링크 대역폭을 측정할 뿐이지 병목현상이 발생한 지점은 알 수 없는 문제점이 있다. 이를 hop-by-hop 측정에 기반한 병목 대역폭 측정을 제시하여 그리드 네트워크에서 전체적인 패킷 지연 개선을 이룰 수 있다. hop-by-hop의 병목 대역폭을 측정하기 위해 paced probe 패킷에 타임스탬프 옵션을 이용하며 병목현상 해소를 통하여 패킷 전송 지연의 단축을 시뮬레이션을 통해 알 수 있다. 본 논문에서 제시한 알고리즘으로 병목 링크의 대역폭과 위치를 파악하여 그리드 ETP나 실시간 QoS를 보장하는 데이터 전송에 기여할 것으로 기대된다. This paper proposes a bottleneck link bandwidth measurement algorithm for reducing packet transmission delay within the grid network. There are two methods for measuring bottleneck link bandwidth:Packet Pair algorithm and Paced Probes algorithm. They measure bottleneck link bandwidth using the difference in arrival times of two paced probe packets of the same size traveling from the same source to destination. In addition, they reduce the influences of cross traffic by pacer packet. But there are some problems on these algorithms:it's not possible to know where bottleneck link occurred because they only focus on measuring the smallest link bandwidth along the path without considering bandwidth of every link on the path. So hop-by-hop based bottleneck link bandwidth measurement algorithm can be used for reducing packet transmission delay on grid network. Timestamp option was used on the paced probe packet for the link level measurement of bottleneck bandwidth. And the reducing of packet transmission delay was simulated by the solving a bottleneck link. The algorithm suggested in this paper can contribute to data transmission ensuring FTP and realtime QoS by detecting bandwidth and the location where bottleneck link occurred.
열처리온도에 따른 다이아몬드상 카본박막의 구조적 특성변화
최원석,박문기,홍병유,Choi Won-Seok,Park Mun-Gi,Hong Byung-You 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.8
In addition to its similarity to genuine diamond film, diamond-like carbon (DLC) film has many advantages, including its wide band gap and variable refractive index. In this study, DLC films were prepared by the RF PECVD (Plasma Enhanced Chemical Vapor Deposition) method on silicon substrates using methane $(CH_4)$ and hydrogen $(H_2)$ gas. We examined the effects of the post annealing temperature on the structural variation of the DLC films. The films were annealed at temperatures ranging from 300 to $900^{\circ}C$ in steps of $200^{\circ}C$ using RTA equipment in nitrogen ambient. The thickness of the film and interface between film and substrate were observed by surface profiler, field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), respectively. Raman and X-ray photoelectron spectroscopy (XPS) analysis showed that DLC films were graphitized ($I_D/I_G$, G-peak position and $sp^2/sp^3$ increased) ratio at higher annealing temperature. The variation of surface as a function of annealing treatment was verified by a AFM and contact angle method.
최원석,신영주,김하경,이가영,Won Seok Choi,MD,Young Joo Shin,MD,PhD,Ha Kyoung Kim,MD,PhD,Kayoung Yi,MD,PhD 대한안과학회 2013 대한안과학회지 Vol.54 No.12
Purpose: In the present study we compared the intraocular pressure (IOP) after cataract surgery according to incisional techniques. <br /> Methods: Patients who underwent phacoemulsification with intraocular lens implantation were divided into 2 groups: clear corneal incision group (CC group), and scleral tunnel incision group (ST group). All complicated cases were excluded. IOP was measured preoperatively and at 1 week, 1, 3, 6, 12, 18 and 24 months after surgery.<br /> Results: Seventy-seven patients (100 eyes) were enrolled in the present study; CC group (28 patients, 33 eyes), ST group (49 patients 67 eyes). Preoperative IOPs in both groups were not significantly different (p = 0.908, student’s t-test). IOP in the CC group at 1 week after surgery significantly decreased 2.22 ± 2.57 mm Hg compared to preoperative IOP (p < 0.001, repeated-measures ANOVA with post hoc analysis), and the IOP of the ST group decreased 2.11 ± 2.50 mm Hg (p < 0.001, repeated-measures ANOVA with post hoc analysis). The lowered IOP was maintained for 24 months postoperatively. There was no significant difference in IOP change after surgery depending on incisional techniques (p = 0.848, repeated measures ANOVA).<br /> Conclusions: There may be no difference in IOP lowering effect after surgery depending on incisional techniques. <br /> J Korean Ophthalmol Soc 2013;54(12):1856-1861
Sensitiv Imago<sup>TM</sup> 측정에 의한 야뇨증 환아의 검사 결과 보고
최원석,김덕곤,이진용,Choi, Won Seok,Kim, Deog Gon,Lee, Jin Yong 대한한방소아과학회 2014 대한한방소아과학회지 Vol.28 No.4
Objectives The purpose of this study is to report the nocturnal enuresis in children using Sensitiv $Imago^{TM}$. Methods Twenty nocturnal enuresis children were tested using Sensitiv $Imago^{TM}$. Results 10 cases showed the lowest score at filter $#5^*$ and 7 cases showed the lowest score at filter $6^*$ in {Express Monitoring} of {Review of System Disorders of Homeostasis}. Conclusions Further study with more samples is necessary to establish the accuracy of Sensitiv $Imago^{TM}$.
PECVD로 합성한 다이아몬드상 카본박막의 전기적 특성
최원석,박문기,홍병유,Choi, Won-Seok,Park, Mun-Gi,Hong, Byung-You 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.11
In addition to its similarity to genuine diamond film, diamond-like carbon (DLC) film has many advantages, including its wide band gap and variable refractive index. In this study, DLC films were prepared by the RF PECVD (Plasma Enhanced Chemical Vapor Deposition) method on silicon substrates using methane ($CH_4$) and hydrogen ($H_2$) gas. We examined the effects of the RF power on the electrical properties of the DLC films. The films were deposited at several RF powers ranging from 50 to 175 W in steps of 25 W. The leakage current of DLC films increased at higher deposition RF power. And the resistivities of DLC films grown at 50 W and 175 W were $5\times10^{11}$ ${\Omega}cm$ and $2.68\times10^{10}$ ${\Omega}cm$, respectively.
냉동 증편 반죽의 저장 온도 차이에 따른 증편의 품질 특성
최원석,우경자,Choi Won-Seok,Woo Kyung-Ja 동아시아식생활학회 2006 동아시아식생활학회지 Vol.16 No.4
The quality of Jeung-pyun made with frozen rice batter was evaluated according to variations in the freezing temperature of the batter. The physicochemical sensory and rheological characteristics of Jeung-pyun were analyzed. The rice batter was stored at -20$^{\circ}C$, -40$^{\circ}C$, and -70$^{\circ}C$ for up to 4 weeks. Statistical data analysis was completed using the SAS program. The pH, and brix percentage of Jeung-pyun batter decreased during the fermentation. In carbon dioxide evolution during fermentation, the levels of the sample stored at -40$^{\circ}C$:, and -70$^{\circ}C$ for 3$\sim$4 weeks were significantly higher than that of the sample stored at -20$^{\circ}C$. The Jeung-pyun moisture content was not significantly affected by freezing temperature or storage times. Specific volume of Jeung-pyun made with rice batter stored at -40$^{\circ}C$, and -70$^{\circ}C$ for 4 weeks was significantly higher than that stored at -20$^{\circ}C$. In sensory evaluation of the stored sample for 4 weeks, the overall quality of Jeung-pyun was not significantly different between with the control and the -20$^{\circ}C$ sample, and between the control and the -40$^{\circ}C$ sample. Among the rheological properties measured with a rheometer on Jeung-pyun made with batter stored sample for 4 weeks at -20$^{\circ}C$, -40$^{\circ}C$ and unfrozen batter, the hardness was increased over the storage time, but the difference was not significant. In conclusion, the most suitable freezing temperature of the rice batter for the manufacture of Jeung-pyun was proposed to be -40$^{\circ}C$.
치주질환으로 인한 전치부 정출(Extrusion)의 심미적 수복에 관한 증례
최원석,Choi, Won-Seok 대한심미치과학회 1999 Journal of the Korean Academy of Esthetic Dentistr Vol.8 No.1
Dental clinicians commonly encounter extrusion of the anterior teeth due to localized alveolar bone loss in adult patients with chronic periodontitis. This pathologic migration of the anterior not only may cause loss of functional anterior guidance and continuous periodontal destruction, but also can lead to esthetic disaster. In fact, most frequently reported chief complaint of the patients with extruded anterior teeth is the 'loss of esthetics', not the periodontal problem itself. The utilization of the expertise and skills in the various dental disciplines is thought to be the best treatment modality for the ultimate functional and esthetic attainment. Interdisciplinary therapy, involving periodontics, orthodontics, and restorative dentistry, was performed for the highest levels of patient and provider satisfaction in this case.