http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기체구 분사 모델을 이용한 CNG DI 엔진의 연소특성 수치해석
최민기 한국분무공학회 2019 한국액체미립화학회지 Vol.24 No.4
This paper describes numerical study of combustion characteristics in CNG(compressed natural gas) DI(direct injection) engine using gaseous sphere injection model. Simulations were conducted using KIVA-3V Release 2 code. Gaseous sphere injection model, which is modified model of liquid fuel injection, was used to simulate the CNG direct injection. Until now, a very fine mesh smaller than the injector nozzle has been required to resolve the gas-jet inflow boundary. However, the gaseous sphere injection model simulates gaseous fuel injection using a coarse mesh. This model injects gaseous spheres as in liquid fuel injection and the gaseous spheres evaporate together without the latent heat of evaporation. Therefore, it does not require a very fine mesh and reduce calculation time. Combustion simulation were performed under various injection timings and injection pressures.
인화성액체를 촉진제로 사용한 방화화재의 감식기법에 관한 연구
최민기,한동훈,최돈묵 한국화재소방학회 2014 한국화재소방학회논문지 Vol.28 No.4
Flammable liquids residues in fire debris and pyrolysis products of flammable materials were analyzed by using Gasdetecting tube, Gas Chromatograph/Mass Spectrometers (GC/MS), and Pyrolyzer. Comparison studies between chemicalcomponents detected in debris fired with and without Flammable liquids were performed. Though Flammable liquidswere not present in debris, Gas detecting tube colors were also changed. Chemical components produced from conventionalcombustions were different from those produced from pyrolysis. Due to the difference of the reaction conditionsbetween combustions and pyrolysis, different chemical products were produced. Petrochemical products of PVC woodlinoleumblock could produce ignitable chemicals, such as toluene, ethylbenzene, undecane, and dodecane. So, for betterfire investigation more consideration of those chemicals will be porformed. 본 연구에서는 연소잔류물에 남아있는 미세한 인화성액체의 성분을 검출하기 위해 가스검지관, Gas Chromatograph/Mass Spectrometer (GC/MS), 열분해분석장비를 활용하였다. 일반적으로 연소했을 경우와 인화성액체를 첨가하여 연소된경우의 성분분석결과를 비교하였다. 결과적으로 인화성액체를 첨가하지 않고 연소 후 생성된 화재잔해물에서도 가스검지관이 반응하는 것을 확인할 수 있었다. 일반적인 연소와 열분해를 통해 생성된 화학성분의 차이가 있었으며, 이는 연소 환경의 차이로 인한 것으로 판단된다. 대표적인 석유화학제품인 우드데코타일(PVC) 시료는 인화성액체를 첨가하지않고 일반적으로 연소시켰을 경우에도 감정인의 정확한 판단을 방해할 수 있는 방해물질인 Toluene, Ethylbenzene,Undecane, Dodecane 등이 검출되는 것을 확인하였다.
崔敏基 건국대학교 정치대학 학도호국단 1955 政大 Vol.- No.3-4
古典은 잃어지지 않는다고 普通 말하는데 이것은 아담ㆍ스미스對하여도 들어맞일것이다. 그의 ‘國富論’은 너무도 유명하기 때문에 처음부터 끝까지 읽는 사람은 極히 드물다. 그러나 우리가 假令 우리나라에 하나의 經濟學의 傳統을 세우고자 하려면 古典을 尊重하고 古典속에 沈潜하여 그 歷史的意義를 究明하여야 할 것이다. 나의 이 解說은 이와같은 意味에 있어서 經濟學古典을 祖述批判ㆍ展開하려는 하나의 試圖로서 着手된 것이다. 經濟學은 스미스 以後 많은 發展, 後退를 보이고 있으나 近來에 있어서의 ‘케인즈革命’은 確實히 하나의 동향을 代表하고 있는 것 같다.
천연지질을 바이오항공유로 전환하기 위한 촉매 설계 전략
최민기,정병훈 한국공업화학회 2020 한국공업화학회 연구논문 초록집 Vol.2020 No.-
천연 지질 (triglyceride)로 부터 수첨탈산소화 반응 및 수첨분해 반응의 2단 공정을 통해 바이오 항공유를 생산하기 위한 연구를 수행하였으며, 이를 위한 촉매 설계를 진행하였다. 수첨탈산소화 반응은 백금이 담지된 알루미나 촉매를 사용하여 진행하였는데, HDO (hydrodeoxygenation) 경로 보다 DCO (decarbonylation/decarboxylation)경로가 우세한 것으로 밝혀졌다. 이 반응 단계에서의 촉매 비활성화는 주로 불포화된 지방산의 C=C를 이용한 열중합을 통해 거대 분자가 형성되고 촉매 기공 내의 fouling현상으로 일어나는 것으로 판명되었으며, 저온 수소화 전처리를 이용할 경우 이러한 문제점을 해결할 수 있음을 밝혔다. 두 번째 수첨분해 반응단계의 경우 백금이 담지된 제올라이트 산촉매들을 이원촉매로 이용하였다. 본 연구에 의하면 분자확산이 빠른 제올라이트들이 과분해 반응이 억제되어 가장 높은 항공유 수율과 isomer 함량을 갖는 것으로 나타났다. 따라서 분자 확산이 가장 우수한 메조기공이 발달하면서도 12MR 마이크로 기공을 갖는 제올라이트 기반 촉매가 가장 우수한 촉매 특성을 나타내었다.