http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공동주택 인동간격에 따른 세대내 일사 유입량과 난방부하에 관한 연구 - 판상형 아파트를 중심으로
최광성,오준걸 한국생태환경건축학회 2017 한국생태환경건축학회 논문집 Vol.17 No.6
Purpose: Building energy saving standard is being strengthened every year. But, there is not enough inflow solar radiation standard for saving heating load of residential part. The purpose of this study is to analyze the effect of the shadow according to the distance between apartment, to compare the Window Transmitted Solar Radiation Energy and the heating load. So as to do verify solar radiation and heat load, Design Builder simulation was conducted. The results of the this study are as follows. First, The Korean Building ACT and energy saving standard proposes the minimum building distance for sunshine, but, there is not enough standard about solar energy for heating energy saving. The solar standard is needed for is not daylight hour but solar radiation energy. Secondly, when the distance between apartment increased by 150%, solar radiation increased by 17 % and heating load was reduced by 15%. Finally, when the distance between apartment increased by 125%~150%, the middle floor is effective to reduce heating loads according to the solar radiation energy and lower floor is not effective. The lower floor is required other plan for reduce heating load
최광성,이학선,배현철,엄용성,Choi, K.S.,Lee, H.,Bae, H.C.,Oem, Y.S. 한국전자통신연구원 2013 전자통신동향분석 Vol.28 No.5
플립 칩 본딩 기술은 1960년대에 개발된 기술이지만 가격 경쟁력, 경박단소(輕薄短小)의 부품 구현, 뛰어난 전기적 특성으로 인해 최근에 와서 다시금 주목 받고 있고, 관련 시장이 지속적으로 성장하고 있는 분야이다. 기술 응용 분야로는 스마트 폰, 타블렛 PC 등 개인 휴대 단말기에서 고성능 서버, 게임 컨트롤로 등 다양한 제품을 아우르고 있다. 미세 피치의 경우 관련 시장이 2018년까지 연평균 35%의 폭발적인 성장을 보일 것으로 예측되고 있다. 따라서, 국내외 기업, 연구소, 학계 등에서 활발한 연구 활동이 진행되고 있다. 본고에서는 플립 칩 본딩 기술의 세부 기술을 살펴보며 동시에 피치에 따라 각 세부 기술에 있어 최근에 개발되고 있는 기술 동향을 논의하고자 한다.
New Impedance Matching Scheme for 60 GHz Band Electro-Absorption Modulator Modules
최광성,정용덕,Young-Shik Kang,Dong-Suk Jun,Byoung-Tae Ahn,Jong-Tae Moon,Jeha kim 한국전자통신연구원 2006 ETRI Journal Vol.28 No.3
This letter proposes a new impedance matching scheme of a traveling wave electro-absorption modulator (TWEAM) module for a 60 GHz band radio-overfiber (ROF) link. A microstrip band pass filter (BPF) was used to achieve impedance matching at the 60 GHz band, and termination resistance was carefully designed to obtain an input impedance close to 50 Ω.. Also, a bias circuit for the device was designed in the module. The measured return loss and frequency response show that the modulator module observes the characteristics of a filter without the need of a further tuning process.
Novel Bumping Process for Solder on Pad Technology
최광성,배호은,배현철,엄용성 한국전자통신연구원 2013 ETRI Journal Vol.35 No.2
A novel bumping process using solder bump maker is developed for the maskless low-volume solder on pad (SoP) technology of fine-pitch flip chip bonding. The process includes two main steps: one is the aggregation of powdered solder on the metal pads on a substrate via an increase in temperature, and the other is the reflow of the deposited powder to form a low-volume SoP. Since the surface tension that exists when the solder is below its melting point is the major driving force of the solder deposit, only a small quantity of powdered solder adjacent to the pads can join the aggregation process to obtain a uniform, low-volume SoP array on the substrate, regardless of the pad configurations. Through this process, an SoP array on an organic substrate with a pitch of 130 μm is successfully formed.
노동시장 이중구조가 노동생산성에 미치는 영향: OECD 국가를 중심으로
최광성,이지은,최충 한국은행 2019 經濟分析 Vol.25 No.3
This paper examines the impact of a dual labor market structure on labor productivity using unbalanced panel data from 29 OECD member countries between 1990 and 2015. By applying a variety of regression models on the panel data (e.g., a pooled regression, a fixed effects model and a GMM), we explore how changes in worker-type composition among temporary, permanent and self-employed workers contribute to productivity growth. While it appears that our results differ slightly, depending on the econometric models, overall an increase in the share of permanent workers leads to a relatively higher increase in productivity growth. On the other hand, it is also seen that the effects of the share of temporary workers on labor productivity are considerably lower than that of permanent and self-employed workers. To sum it up, our findings indicate that an increase in temporary workers could have an adverse effect on labor productivity. 본고에서는 OECD 회원국(2018년 현재 총 36개국) 중 29개국을 대상으로 상용직·임시직 고용비중 변화가 노동생산성에 미치는 영향을 실증 분석하였다. 이 때 자영업자도 함께 고려함으로써 상용직 및 임시직 대비 노동생산성을 비교하였다. 구체적으로는 1990∼2015년 동안 OECD 29개국의 국가별 불균형(unbalanced) 패널자료를 이용하여 통상최소자승법(OLS), 고정효과(fixed effect) 분석, 일반화된 적률법(이하 GMM), 동태적 패널 GMM 등 다양한 방법으로 고용형태 변화가 노동생산성에 미치는 영향을 추정하였다. 분석 결과를 보면, 각 추정 방법에 따라 약간 차이는 있으나 상용직 비중 증가가 노동생산성 증대에 미치는 영향이 가장 높았으며 그 다음이 자영업, 임시직 순으로 나타났다. 특히 임시직 근로자 비중이 노동생산성에 미치는 영향은 상용직에 비해 상당 폭 낮은 것으로 추정되었다. 이러한 결과는 노동시장 이중구조가 심화되면 노동생산성에 부정적 영향을 미칠 가능성이 있음을 시사한다.