http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 조진희(Jo, Jin-Hee) (검색결과 49 건)
- 무료
- 기관 내 무료
- 유료
-
-
-
교류형 PDP 보호막용 MgO-CaO 박막의 광학적 특성과 전기적 특성
조진희,김락환,박종완,Jo, Jin-Hui,Kim, Rak-Hwan,Park, Jong-Wan 한국재료학회 1999 한국재료학회지 Vol.9 No.6
Optical and electrical properties of MgO-CaO films as a protective layer for AC plasma display panel were studied. When the [(CaO/(MgO+CaO)] ratio of evaporation starting materials was optimum composition, 0.1, firing voltage and memory margin of the film were 176V and 0.5, respectively. When [CaO/(CaO+MgO)] was 0, 0.1 and 0.2, memory margin was 0.39, 0.5 and 0.41, respectively, and surface roughness of films was $27.7\AA$, $21.1\AA$ and $40.3\AA$, respectively. It was thought that memory margin had a reverse-relation with surface roughness. The density of film was calculated by measuring the refractive index of film. The density of MgO film was 3.21g/㎤ and the density of film, when [CaO/(CaO+MgO)] was 0.1, was 3.632g/㎤. The mixture of MgO-CaO films showed a good transmittance property in the visual range.
-
조진희,김락환,김정열,이유기,김희재,박종완,Jo, Jin-Hui,Kim, Rak-Hwan,Kim, Jeong-Yeol,Lee, Yu-Gi,Kim, Hui-Jae,Park, Jong-Wan Materials Research Society of Korea 1999 한국재료학회지 Vol.9 No.5
Alkaline earth metal oxides were added to the conventional MgO films as a protective layer for dielectric materials to have lower firing voltage(Vf) of the plasma display panel(PDP). Panels with various protective layers of MgO-alkaline earth metal oxides were prepared on glass by using e-beam evaporation and its effect on firing voltage characteristics were investigated. (Ba-Mg)O films had poor voltage characteristics because of higher activation energy of BaO. But, (Sr-Mg)O, (Ca-Mg)O and (Ca-Sr-Mg) O had better voltage characteristics than the conventional MgO. A mixture film of (Mg-Ca-Sr)O show the lowest firing voltage which is less than that of MgO by 20V. The chemical composition to have lowest firing voltage is MgO:SrO:CaO ratio of 6:2:2. The mixture of MgO-Alkaline earth metal oxides films showed good transmittance properties within the visual range.
-
조진희,박형근,모혜란,이한수,Jo, Jin-Hee,Park, Hyung-Keun,Mo, Hye-Ran,Lee, Han-Soo 대한토목학회 2015 대한토목학회논문집 Vol.35 No.1
본 연구는 농촌지역의 쇠퇴도를 진단하고, 농촌생활권의 기초단위인 읍 면 지역에 대한 공간적 쇠퇴 특성과 유형을 도출하는데 목적을 두고 있다. 이를 위해, 충청권 27개 시 군을 대상으로 거시적 차원의 쇠퇴수준과 잠재수준을 분석하여 도시차원의 쇠퇴현상을 진단한다. 다음으로 공간단위를 세분화하여 충청권의 274개 읍 면지역을 대상으로 쇠퇴수준을 분석하고, K-평균군집분석을 적용하여 쇠퇴유형 및 쇠퇴특성을 도출한다. 충청권 시 군 별 쇠퇴수준 및 잠재수준 분석결과, 충남지역의 청양군, 서천군, 태안군이 높은 쇠퇴도를 보이고 있으며, 충북지역의 전통적 낙후지역인 남부 3군(보은, 옥천, 영동)과 단양군, 괴산군의 쇠퇴도가 높게 나타나고 있다. 또한, 충청권의 읍 면지역 중 쇠퇴의 경향을 보이는 166개 읍 면지역에 대한 군집분석 결과 인구 및 주택 노후화지역(29), 경제기반 취약지역(16), 중심지접근성 취약지역(42), 주거환경 열악지역(51), 노령인구 취약지역(28)의 5개 군집유형의 쇠퇴특성이 도출되었다. 충청권 농촌지역의 쇠퇴특성과 유형화를 시도한 본 연구는 농촌지역 활성화 정책 수립에 있어 기초자료로 활용될 것으로 기대되며, 향후 연구에서는 읍 면지역 차원을 넘어 농촌정체성의 기초단위가 되는 농촌마을을 대상으로 종합적인 진단과 맞춤형 정책발굴 연구가 이어질 것으로 기대된다. The study aims to identify the degree and types of spatial recessions in Si/Gun and Eup/Myun units within Chungcheong region in South Korea to contribute to the efforts being made to diagnose the rural recession and the potentials. To this end, we analyzed 27 Sis and Guns to identify the degree of recession and potentials of rural areas in Chungcheong region. We also carried out the diagnosis and K-Means Clustering on 274 Eups and Myuns, smaller administrative units, to figure out the types and characteristics of the rural recessions. In case of the analysis targeting the Sis and Guns, a relatively high degree of rural recession was found in Cheongyang, Seocheon and Taean for Chungcheongnam-do, and in Danyang and Goisan, as well as in Boeun, Okcheon and Youngdong - which are collectively called as 'Southern 3 Areas in Chungcheongbuk-do' as they are conventionally known by their high degree of rural recession. According to the results of the clustering analysis carried out on the 166 Eups and Myuns, there were five outstanding clusters. They were; areas with housing deterioration (29), areas with poor economic foundation (16), areas with poor accessibility to central areas (42), areas with poor residential environment (51) and areas with aged population (28). The findings and results of the present study are likely to serve as a basis for the design and enforcement of forthcoming rural area activation policies. Also, it would be highly recommended that a more comprehensive diagnosis is taken from a community-level perspective and policy suggestions and strategies tailored for rural communities are further discussed.
-
-
성견에서 임프란트 매식시 골형성단백 사용에 따른 골재생에 관한 연구
조진희,방몽숙,이종호,Jo Jin-Hee,Vang Mong-Sook,Lee Jong-Ho 대한치과보철학회 1994 대한치과보철학회지 Vol.32 No.4
The purpose of this study is to evaluate the effect of the bone morphogenetic protein, bone matrix gelatin and collagen matrix on the amount and shape of generating new bone adjacent to the implant. Implants were inserted in the mandible of adult dogs at 2 months after teeth extraction. Artificial bony defects, 3mm in width and 4mm in depth were made at the mesial and distal side of implant. Experimental groups were divided into three groups ; Group 1 : Defects filled with collagen matrix and bone morphogenetic protein, Group 2 : Defects filled with bone matrix gelatin. Control group : Defects filled with only collagen matrix. After implantation, the animals were sacrificed at 1,3,5 and 10 weeks for light microscopic examination. For the fluorescent microscopic examination. each tertracycline Hcl and calcein were injected at 1, 3, 5, 8 and 10 weeks after implantation. The results obtained were as follows : 1. The molecular weight of bovine BMP was about 18,100 by hydroxyapatite chromatography. 2. Osseointegration was observed in experimental groups 1 & 2, and BMG and BMP had an excellent bone forming capability as a filling materials to the repair of the bone defects. 3. The degree of healing of bone defect area, the experimental group 1 showed more prominent bone formation than control group, and the control group showed fibrous connective tissue between the implant and the bone. 4. In the fluorescent microscopic findings, bone remodelling was observed regenerative lamellar bone at defect area in experimental group 1, and partial remodelling in experimental group 2, In the control group, fibrous connective tissue was observed between the implant and bone surface and sign of remodelling was not apperaed. Above results suggest that BMP has rapid osteoinductive property and can be used clinically as a bone substitute on bone defects around implants.
-
조진희,방몽숙,Jo, Jin-Hee,Vang, Mong-Sook 대한치과보철학회 1991 대한치과보철학회지 Vol.29 No.2
The purpose of this study was to analyze the stresses and displacements of various esthetic restorations and abutment teeth. The finite element models of central incisor were divided into four groups according to the types of restoration. Three load cases were applied; 1) 45 degrees on the incisal edge, 2) horizontal force on the labial surface, and 3) 26 degrees diagonally on the lingual surface. Material property, geometry, and load conditions of each model were inputed to the two dimensional finite element program and stresses and displacements were analyzed. Results were as follows; 1. In the cases of porcelain fused gold ann and porcelain laminate venner, stresses were equally distributed in supporting abutment tooth. 2. The metal coping of porcelain fused gold u and collarless porcelain fused gold crown functioned as a good stress distributor. 3. When the horizontal load applied, the highest tensile and compressive stresses were seen in the cervical margin of restoration and the dentin of the abutment tooth. 4. The highest displacement of restoration was seen when load was applied at an mee of 26 degrees diagonally in lingual surface of tooth in centric occlusion. 5. The influence of loading direction on the stresses and displacements in the restoration was greater than that of various design. 6. The possibility of fracture was highest in porcelain jacket crown.
-
조진희,최상훈,Jo, Jin Hee,Choi, Sang Hoon 대한자원환경지질학회 2013 자원환경지질 Vol.46 No.1
대화광상은 경기육괴의 편마암류와 화강암류에 발달한 열극을 충진 발달한 함 Mo-W 열수 맥상 광상이다. 대화광상의 몰리브덴-텅스텐 광화작용과 관련된 주요 수반광물인 석영에서 관찰되는 유체포유물은 상온 ($20^{\circ}C$) 에서의 상(phase) 관계와 냉각 및 가열 실험을 통해 측정된 균일화 온도와 상변화를 기초로 하여 3가지 주요 유형 (Type I, 액상이 우세한 $H_2O$-NaCl 유형; Type II, 기상이 우세한 $H_2O$-NaCl 유형; Type III; $CO_2-H_2O$-NaCl 유형) 으로 분류된다. 또한, 함 $CO_2$ Type III 유체포유물은 $CO_2$ 균일화 및 최종 균일화 특성을 바탕으로 4가지 유형 (IIIa, IIIb, IIIc, IIId)으로 세분된다. 대화광상 Type I 유체포유물의 균일화 온도는 약 $374^{\circ}C{\sim}161^{\circ}C$로 넓은 범위를 보여주며, 염농도 역시 약 13.6~0.5 equiv. wt. % NaCl의 넓은 조성 범위를 보인다. Type III 유체포유물 냉각 실험 시 측정된 $CO_2$ 상의 용융 온도는 $-57.4{\sim}-56.6^{\circ}C$이며, $CO_2$ 균일화 온도는 $29.0{\sim}30.8^{\circ}C$이다. 또한 $CO_2$ clathrate 용융 온도는 $7.3{\sim}9.5^{\circ}C$로 염농도는 5.2~1.0 equiv. wt. % NaCl이고, 최종 균일화 온도는 $303^{\circ}C{\sim}251^{\circ}C$로 비교적 좁은 범위로 확인되었다. $CO_2-H_2O$-NaCl계 (Type III) 유체포유물의 경우 온도가 감소함에 따라 염농도 역시 감소하는데, 이는 높은 염농도를 가진 $H_2O$-NaCl계 유체와 낮은 염농도를 가진 $CO_2-H_2O$-NaCl계 유체의 불혼화에 의해 열수의 진화가 이루어졌음을 의미한다. Type I 유체포유물은 온도 감소와 염농도 사이의 뚜렷한 변화가 인지되지 않았다. 따라서, 대화 열수계의 함 몰리브덴-중석 광화작용은 $400^{\circ}C$, 5.2 equiv. wt.% NaCl의 염농도를 가진 광화유체로부터 시작되어, 약 $350^{\circ}C$ 부근에서 유체의 불혼화 용융에 의해 진행되었다. 이후 대화 열수계에 유입된 상대적으로 낮은 온도와 염농도를 갖는 유체 (천수 또는 상대적으로 높은 물/암석 비를 갖는 열수유체) 의 혼입 작용에 의해 후기 천금속 광화작용이 야기되었다. The Daehwa Mo-W deposit is located within the Gyeonggi massif. Quartz and calcite vein mineralization occurred in the Precambrian gneiss and Jurassic granites. Three main types (Type I: liquid-rich $H_2O$ type, Type II: vapor-rich $H_2O$ type, Type III: $CO_2-H_2O$ type) of fluid inclusions were observed and are classified herein based on their phase relations at room temperature. Within ore shoots, type III fluid inclusions have been classified into four subtypes (type IIIa, IIIb, IIIc and IIId) based on their volume percent of aqueous and carbonaceous ($CO_2$) phase at room temperatures combined with their total homogenization behavior and homogenization behavior of $CO_2$ phase. Homogenization temperatures of primary type I fluid inclusions in the quartz range from $374^{\circ}C$ to $161^{\circ}C$ with salinities between 13.6 and 0.5 equiv. wt.% NaCl. Homogenization temperatures of primary type III fluid inclusions in quartz of main generation, are in the range of $303^{\circ}C$ to $251^{\circ}C$. Clathrate melting temperatures of the type III fluid inclusions were 7.3 to $9.5^{\circ}C$, corresponding to salinities of 5.2 to 1.0 equiv. wt. % NaCl. Melting and homogenization temperatures of $CO_2$ phase of type III fluid inclusions were -57.4 to $-56.6^{\circ}C$ and 29.0 to $30.8^{\circ}C$, respectively. Fluid inclusion data indicate a complex geochemical evolution of hydrothermal fluids. The Daehwa early hydrothermal system is characterized by $H_2O-CO_2$-NaCl fluid at about $400^{\circ}C$. The main mineralization occurred by $CO_2$ immiscibility at temperatures of about 300 to $250^{\circ}C$. At the late base-metal mineralization aqueous fluid formed by mixing with cooler and less saline meteoric groundwater.
-
코리아스칼라연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
