http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조덕상,이원경 한국소음진동공학회 2000 소음 진동 Vol.10 No.6
The main objectives of this study are to examine the random response of a vibration absorber system with autoparametric coupling in the neighborhood of internal resonance by Gaussian closure and to compare the results with those obtained by Monte Carlo simulation. The numerical simulation is found to support the main features of the nonlinear modal interaction in the neighborhood of internal resonance conditions. While the Gaussian closure exhibits regions of multiple solutions in the neighborhood of internal resonance, the numerical simulation gives only one solution depending on the assigned initial conditions. The on-off intermittency phenomena of the cantilever mode is observed in the Monte Carlo simulation over a small range of parameter.
Social Distancing, Labor Supply, and Income Distribution
조덕상 한국개발연구원 2021 KDI Journal of Economic Policy (KDI JEP) Vol.43 No.2
The effects of social distancing measures on income distributions and aggregate variables are examined with an off-the-shelf heterogeneous-agent incomplete-market model. The model shows that social distancing measures, which limit households’ labor supply, can decrease the labor supply of low-income households who hold insufficient assets and need income the most given their borrowing constraints. Social distancing measures can therefore exacerbate income inequality by lowering the incomes of the poor. An equilibrium interest rate can fall when the social distancing shock is expected to be persistent because households save more to prepare for rising consumption volatility given the possibility of binding to the labor supply constraint over time. When the shock is expected to be transitory, in contrast, the interest rate can rise upon the arrival of the shock because constrained households choose to borrow more to smooth consumption given the expectation that the shock will fade away. The model also shows that social distancing shocks, which diminish households’ consumption demand, can decrease households’ incomes evenly for every income quantile, having a limited impact on income inequality
Pyramidal Busniess Groups and Asymmetric Financial Frictions
조덕상 한국개발연구원 2019 KDI Journal of Economic Policy (KDI JEP) Vol.41 No.3
Given capital market imperfections, an entrepreneur can alleviate financial frictions by creating a pyramidal business group in which a parent firm offers its subsidiary firm internal finance. This endogenous creation of pyramidal business groups can beget asymmetric financial frictions between business-group firms and stand-alone firms. I build a model to show that these asymmetric financial frictions can have sizable effects on resource allocation. On one hand, the financial advantage of pyramidal business groups can foster productive firms by incorporating them as subsidiaries. On the other hand, the asymmetrically large amount of external capital controlled by pyramidal business groups can be expended by unproductive business-group firms and push up the equilibrium price of capital. The model suggests that with fine investor protection or low financial frictions, the benefits of pyramidal business groups can be dominated by their costs because the probability of fostering productive subsidiaries diminishes as the efficiency of external capital markets improves, while the prevalence of pyramidal business groups is not attenuated due to their continuing asymmetric financial advantage.
조덕상,김영종 한국전산구조공학회 2000 한국전산구조공학회논문집 Vol.13 No.4
이 논문은 불규칙 가진력을 받는 회전-고정보의 비선형 응답특성을 나타낸다. 불규칙 가진력은 두 번째 고유모드의 절점과 최대변위점에 가했다. 비선형 편미분 방정식과 경계조건으로 표현되는 이 문제를 Galerkin의 방법을 이용하여 연립 비선형 상미분방정식으로 변환하였다. 이 상미분방정식으로부터 Fokker-Planck방정식과 모멘트 방정식을 얻은 후 Gaussian closure 방법 및 non-Gaussian closure 방법을 이용하여 3 모드 근사시 각각 27개 및 209개의 자율 상미분방정식을 구하였다. Gaussian closure 방법과 non-Gaussian closure 방법으로 2 모드 및 3 모드 근사해석을 수행하였고 해석적 결과들은 Monte Carlo 시뮬레이션 결과와 비교되었다. 해석결과 2 모드 근사해와 3 모드 근사해가 거의 일치하였고 2 모드 내부공진만 고려하여도 해석결과에 별 영향을 주지 않는다는 것을 알 수 있다. This study presents the nonlinear responses of a hinged-clamped beam under broadband random excitation. By using Galerkin's method the governing equation is reduced to a system or nonautonomous nonlinear ordinary differential equations. The Fokker-Planck equation is used to generate a general first-order differential equation in the joint moments of response coordinates. Gaussian and non-Gaussian closure schemes are used to close the infinite coupled moment equations. The closed equations are then solved for response statistics in terms of system and excitation parameters. The case of two mode interaction is considered in order to compare it with the case of three mode interaction. Monte Carlo simulation is used for numerical verification.
깔창의 높이에 따른 전후 압력 분포와 좌우 균형에 관한 연구
조덕상,고현곤,차승용,김미리,홍보람,서지희,전미희,송미리,이효숙,김민준,김형수,Jo, Deok-Sang,Goh, Hyun-Gon,Cha, Seung-Yong,Kim, Mi-Ri,Hong, Bo-Ram,Seo, Ji-Hee,Jeon, Mi-Hee,Song, Mi-Ri,Lee, Hyo-Suk,Kim, Min-Jun,Kim, Hyoung-Su 대한물리치료과학회 2012 대한물리치료과학회지 Vol.19 No.1
Purpose : The purpose of this study was to investigate the effect of body balance according to insole height and to provide basic information about body balance by insole height. Method : We examed 40 university students who had healthy body without balance impairment. Plantar pressure was measured by EMED system and the measurement of MTD balance used the MTD-balance master in static stance posture. Both of equipments are various measurement method. We measured plantar pressure and MTD balance each three different height insole(0cm, 3cm, 7cm) and each trial was 30 second in duration. Result : The results were as follows : 1) It showed significantly differences between bare foot and height insole. The anterior plantar pressure with 3cm or 7cm insole were more higher than bare foot(P<.05). 2) There were no significantly differences between barefoot and height insole with MTD-balance master(P<.05). Conclusion : In conclusion, the measurement of MTD balance showed right and left balance ability didn't change by insole height, but plantar pressure was moved on anterior side of foot so we could know insole's height cause the effect to anterior and posterior balance ability.
유한요소해석을 이용한 하이브리드 헤밍과 롤러 헤밍의 비교
조덕상,오명환,김래형,김지훈 한국소성∙가공학회 2021 소성가공 : 한국소성가공학회지 Vol.30 No.3
In this study, the hybrid and roller hemming processes of aluminum alloy sheets were compared using the finite element analysis. The aluminum alloy 6014-T4 sheet with a thickness of 1 mm was used for the hemming process. The mechanical properties of the aluminum sheet obtained through a uniaxial tensile test were used for the simulation. The finite element analysis of hybrid and roller hemming was performed using a commercial software (ABAQUS) by the use of the mechanical properties. The finite element simulation results showed that the hybrid hemming holds an advantage over the roller hemming in terms of the dimensional accuracy