http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
우리나라 2015 과학 교육과정 성취기준과 미국 차세대 과학표준(NGSS) 수행기대의 물리 영역 비교 분석
정준형,강남화 한국물리학회 2016 새물리 Vol.66 No.6
The purpose of this study was to compare Achievement Standards (ASDs) in Korean 2015 Revised National Curriculum to Performance Expectations (PEs) in the US Next Generation Science Standards (NGSS), with a focus on physics. Each ASD statement consists of science content and skills, just as each PE statement consists of core science ideas and practices. We compared the physics contents and the inquiry skills of the ASDs and the PEs. The findings showed that electric circuits and concepts in modern physics were emphasized more in the ASDs while heat and energy was more emphasized the in PEs. Some differences in the levels of expectation for some content knowledge were noted. In terms of inquiry skills and practices, the ASDs required no ‘Posing scientific questions’ whereas more than 50% of the ASD statements included ‘Drawing and evaluation of conclusions’. On the other hand, the PEs included every practice (inquiry skill). In particular, ASD’s lack of emphasis on the kinds of inquiry skills that require student-led inquiry suggests that complementary interventions are needed in the development and implementation of textbook or curricular materials. 이 연구는 우리나라 2015 과학교육과정의 물리 영역 성취기준과 미국 차세대 과학표준(NGSS)의 수행기대를 비교하여 우리나라 교육과정의 현 주소를 확인하고 추후 교육과정 실행 및 정책에 시사점을 찾고자 수행 되었다. 우리나라 과학 교육과정의 성취기준은 일반화된 지식과 기능으로 서술되어 있으며, NGSS의 수행기대 역시 실천과 교과 핵심 아이디어의 결합으로 이루어져 있으므로 과학 내용과 탐구 기능으로 구분하여 각각 비교 분석하였다. 연구 결과 우리나라 교육과정은 NGSS에 비해 전기회로와 현대물리 내용을 강조하고 NGSS는 열과 에너지 영역을 더 강조하는 것으로 드러났으며 일부 영역 개념 요소에서 수준의 차이를 보였다. 탐구 기능 측면에서는 우리나라 성취기준에서 ‘결론 도출 및 평가’가 전체의 50%이상인 반면 NGSS의 수행기대는 모든 기능을 고르게 강조하였다. 특히 학생 주도형 탐구 요소인 ‘과학적 문제 제기’, ‘탐구 설계 및 수행’, ‘모델의 개발 및 사용’이 우리나라 성취기준에서 부족한 것으로 드러나 교육과정 실행차원에서 보완이 필요함이 나타났다.
3D 프린팅 기술을 활용한 PLA 필라멘트 비탈형 거푸집 연구
정준형,현지훈,정희상,고휘재,이주희,안요섭,Jeong, Junhyeong,Hyun, Jihun,Jeong, Heesang,Go, Huijae,Lee, Juhee,Ahn, Joseph 한국건설관리학회 2021 한국건설관리학회 논문집 Vol.22 No.1
최근 건축물의 디자인이 정형에서 벗어나서 창의적인 형태를 갖는 비정형 건축물로 변하는 추세이며, 이에 따른 건설기술의 척도가 비정형 건축물의 건축 설계, 시공 등으로 바뀌고 있다. 3D 프린팅 기술 중 하나인 FDM 적층방식을 이용하여 다양한 형태의 비정형 거푸집을 기존 거푸집에 비하여 저렴하고 빠르게 제작할 수 있으며, 인력문제 등을 해소할 수 있을 것으로 보인다. 3D 프린터를 이용하여 PLA 필라멘트 비탈형 거푸집을 원기둥형과 직육면체 형태로 제작하여 재령 28일의 기준을 통한 압축파괴 실험과 변형정도, 재사용성 여부 등을 검토하여 PLA 필라멘트 거푸집에 대한 사용성을 검증하였다. 추가적으로 실험체의 크기를 다르게 하여 크기에 따른 실험도 진행하였다. 실험결과 필라멘트 거푸집 자체가 약3~4MPa의 강도를 갖는 것으로 확인되었으며, 기존 선행연구와 실험을 통한 데이터를 검토한 결과 Infill 60% 이상으로 사용해야 적절하며, 강도적인 측면에서도 유리한 것으로 확인되었다. 필라멘트 거푸집의 절단, 탈형 결과 표면이 매우 깨끗하고 손상이 없어 재사용도 가능할 것으로 기대된다. In recent years, the design of buildings is changing from formal to creative and freeform. Accordingly, the scale of construction technology is changing to architectural design and construction of irregular buildings. Using the FDM method, which is one of the 3D printing technologies, it is possible to manufacture various forms of irregular formwork inexpensively and quickly coMPared to the existing formwork, and it seems to be able to solve the manpower problem. Using a 3D printer, the PLA filament formwork is produced in the form of a cylinder and a rectangular cuboid, and the usability of the PLA filament formwork is confirmed by examining the compression strength test and the degree of deformation and reusability over 28 days of age. Different sizes of additional specimens are also conducted according to the size. As a result of the experiment, it was confirmed that the filament formwork itself has about 3~4MPa strength. As a result of reviewing data through existing linear studies and experiments, it is appropriate to use more than 60% infill, and it is advantageous in terms of strength. As a result of cutting and dismantling the filament formwork, the surface is very clean and there is no damage, so it can be reused.
정준형,박정훈,김장목,Yung-Deug Son 전력전자학회 2019 JOURNAL OF POWER ELECTRONICS Vol.19 No.1
This paper proposes a DC-link voltage balance controller using the fourth-phase of a three-level neutral-point clamped (NPC)PWM converter with medium vector selection (MVS) PWM for common-mode voltage reduction. MVS PWM makes thevoltage reference by synthesizing the voltage vectors that cannot generate common-mode voltage. This PWM method is effectivefor reducing the EMI noise emitted from converter systems. However, the DC-link voltage imbalance problem is caused by theuse of limited voltage vectors. Therefore, in this paper, the effect of MVS PWM on the DC-link voltage of a three-level NPCconverter is analyzed. Then a proportional-derivative (PD) controller for the DC-link voltage balance is designed from theDC-link modeling. In addition, feedforward compensation of the neutral point current is included in the proposed PD controller. The effectiveness of the proposed controller is verified by experimental results.
Vehicle-following system using Color-Vision
정준형,한민홍 한국경영과학회 1994 한국경영과학회 학술대회논문집 Vol.- No.1
This paper introduces a vehicle-following-system in which a moving vehicle recognizes the front vehicle's tail-light color and luminance, while maintaining a certain distance and avoiding collision. Using color images rather than using gray-scale images makes it easier to detect the objective color and global region growing method. This paper contributes to the basic study of Color-Vision, and can be extended to color inspection systems.