http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수출 딸기 팔레타이징 적합 상자 및 파프리카 전용 수확 상자에 따른 선도유지 효과
정민재(Minjae Jeong),조미애(Mi Ae Cho),정재은(Jae Eun Jeong),조동래(Donglae Jo),홍세진(Se Jin Hong),황인근(In-gun Hwang),장민선(Min-Sun Chang),엄향란(Hyang Lan Eum),홍윤표(Yoon-Pyo Hong) 한국원예학회 2021 한국원예학회 학술발표요지 Vol.2021 No.10
딸기는 꾸준히 수출량이 증가하고 있으며 주로 홍콩, 싱가포르 등 동남아국가로 수출되고 있다. 딸기 수출 시 진주, 논산, 담양 등 국내 주요 산지별 외포장 상자 규격이 다르고, 팔레타이징에 부적합하여 장거리 운송 중 흔들림으로 인한 딸기 품질저하가 발생되는 문제점이 있다. 파프리카는 수출 시 저온장해, 꼭지부패, 착색불량 등 품질저하로 인한 클레임이 발생되고 있으며 특히 수확 및 예냉 시 주로 사용되는 상자는 파프리카 호흡특성에 적합하지 않아 개선이 필요한 상황이다. 이에 본 연구에서는 딸기 수출 시 팔레타이징에 적합한 포장상자를 표준화하고, 파프리카 호흡특성에 적합한 개공율을 개선한 상자를 개발하여 선도유지 효과를 알아보고자 하였다. 개선된 팔레타이징 적합 딸기 외포장 상자 규격은 L 520 × W 270 × H 75 mm로 다단 적재 시 상자의 미끄럼 방지 및 고정을 위한 틀을 추가하였고, 측면 공기 순환구를 통해 통기를 원활하게 하였다. 또한 파프리카 수확 상자는 개공율을 3~4% 수준으로 낮춰 수분 손실로 인한 증산작용을 억제하는데 효과적이었다. 딸기 팔레타이징 적합 상자 및 파프리카 수확 상자 적용으로 손실률을 절감하고, 수출 시 상품성이 향상되리라 기대한다.
인장 및 압축 등방 잔류응력 측정을 위한 누프 압입시험의 응력환산계수 결정
정민재 ( Min Jae Jeong ),김영천 ( Young-cheon Kim ) 한국부식방식학회 2021 Corrosion Science and Technology Vol.20 No.6
Instrumented indentation testing has been widely used for residual stress measurement. The Knoop indentation is mainly selected for determining anisotropic mechanical properties and non-equibiaxial residual stress. However, the measurement of equibiaxial stress state and compressive residual stress on a specimen surface using Knoop indentation is neither fully comprehended nor unavailable. In this study, we investigated stress conversion factors for measuring Knoop indentation on equibiaxial stress state through indentation depth using finite element analysis. Knoop indentation was conducted for specimens to determine tensile and compressive equibiaxial residual stress. Both were found to be increased proportionally according to indentation depth. The stress field beneath the indenter during each indentation test was also analyzed. Compressive residual stress suppressed the in-plane expansion of stress field during indentation. In contrast, stress fields beneath the indenter developed diagonally downward for tensile residual stress. Furthermore, differences between trends of stress fields at long and short axes of Knoop indenter were observed due to difference in indenting angles and the projected area of plastic zone that was exposed to residual stress.