http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로 엔드밀을 이용한 측면가공에서의 공구변형에 의한 가공오차 보상
전두성,서태일,윤길상,장호수 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-
This paper presents an integrated machining error compensation without measuring cutting force in micro end-mill. To compensate machining error, we consider new tool path. In order to determine the compensated tool path, two machining error parameters are defined and modeled using the SEM images. Experiments are carried out to validate the approaches proposed in this paper. In result, we identify the proposed methods are effective to compensate for machining errors.
전두성(Doosung Jun),김종록(Jongrok Kim),김우겸(Wookyeom Kim),김승철(Seungcheol Kim),문희장(Heejang Moon) 제어로봇시스템학회 2012 제어로봇시스템학회 합동학술대회 논문집 Vol.2012 No.7
초음속 유동 및 2상의 냉각 유동이 공존하는 화염유도로의 설계를 위해서는 유도로 진입 전 로켓 노즐 출구의 고온가스를 적절히 냉각시켜야 한다. 본 연구는 화염유도로 해석을 위한 사전 검증 연구로서 물 분사 초음속 노즐 플룸의 2차원 축대칭 해석을 수행하였다. 단상 초음속 노즐 플룸의 경우 충격파 셀 구조를 통해 물리적으로 위배되는 현상은 발견되지 않았다. DPM(Discrete Phase Model)의 사전 검증 차원에서 물분사가 포함된 2상 아음속 파이프 유동 해석을 수행하였으며 액적 분열과 온도 분포의 변화를 정성적으로 확인할 수 있었다. 초음속 고온 플룸에 냉각수를 직접 분사 시 DPM 모델을 이용한 초음속 2상 유동에도 냉각효과가 어느 정도 모사될 수 있음을 확인하였다.
화염유도로 예비 해석을 위한 로켓노즐 플룸의 CFD 해석 검증
전두성(Doosung Jun),김재우(Jaewoo Kim),김종록(Jongrok Kim),김우겸(Wookyeom Kim),김승철(Seungcheol Kim),문희장(Heejang Moon) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
초음속 유동과 2상 유동이 공존하는 화염유도로 내 유동해석을 위한 사전 해석검증의 일환으로, 초음속 단상 노즐 플룸의 2차원 축대칭 해석과 물 분사가 포함된 3차원 2상 아음속 유동을 해석하였다. 단상 초음속 노즐 플룸의 경우 충격파 셀 구조를 통해 물리적으로 위배되는 현상은 발견되지 않았다. 물분사가 포함된 3차원 2상 아음속 유동의 경우, 액적의 거동과 기화 과정을 정성적으로 볼 수 있었으며 물 분사시 고온공기의 냉각 모사가 가능함을 확인할 수 있었다. 이들 기초 검증 결과들은 추후 초음속 2상 물분사 플룸 유동에 적용되어 3차원 화염유도로 해석에 응용될 예정이다. This paper investigates CFD investigation on single phase supersonic nozzle flow and 2-phase subson ic flow prior to rocket nozzle supersonic 2-phase flow with water injection within the flame deflector. Numerical results of supersonic nozzle single phase flow showed no notable unrealistic behavior as it captures the usual shock cell structures. Three-dimensional 2-phase flow analysis has also been performed to verify whether the approach can grab the droplet behavior during cooling by water injection. It is expected these basic studies will enhance the cooling problem analysis of supersonic 2-phase rocket plume in the future.
SiO<sub>2</sub> 계열 젤화제에 따른 케로신 젤 연료의 유변학적 특성 연구
김재우,전두성,강태곤,장석필,구자예,문희장,Kim, Jaewoo,Jun, Doosung,Kang, Teagon,Jang, Seok Pil,Koo, Jaye,Moon, Heejang 한국추진공학회 2012 한국추진공학회지 Vol.16 No.6
본 연구에서는 $SiO_2$ 계열 젤화제로 알려진 Aerosil(R) R972, Silica 230, Silica 530을 사용하여 케로신 기반 젤 연료를 제작하였다. 케로신 계열 연료로는 Jet A-1을 사용하였으며 젤화(gelification) 여부를 확인하기 위한 전단박화(shear thinning) 현상은 멱법칙(power-law) 모델을 이용하여 검증하였고 제작된 모든 젤 연료는 전단박화 효과와 함께 $SiO_2$ 젤화제의 함유량이 증가할수록 젤의 점도가 높게 형성됨을 확인하였다. 본 연구에서 사용된 젤화제 중 Aerosil(R) R972를 첨가한 젤 연료의 점성계수가 전단률 전 영역에 걸쳐 멱법칙 모델을 따르는 것이 확인되었으며 상대적으로 Silica 230과 Silica 530을 첨가한 젤 연료는 전단률 150 [1/s] 근방 이하에서 멱법칙이 유효하지 않음을 알 수 있었다. 또한, 젤화제 함유량이 증가할수록 vortex 혼합법과 수동 혼합법 간의 유변학적 특성이 크게 차이 나는 것이 관찰되었다. Present work deals three families of $SiO_2$ gelling agents which have been used to produce gel fuel based on Kerosene. Jet A-1 is chosen as fuel where power-law rheological model is used to confirm whether or not the gelification is achieved depending on the %wt of gellant. It was confirmed that the produced jelly-like substance have shear-thinning effect, and that its apparent viscosity increases as $SiO_2$ concentration increases. Compared to other gellants, gel with Aerosil(R) R972 fits most to the power-law model, while gels with Silica 230 and Silica 530 deviate from the power-law model. The rheological characteristics behaved differently depending on the mixing method(vortex mixing and manual mixing) when gellant concentration is increased.
Ectopic Prostatic Tissue in the Rectum: A Case Report
설명진,노경희,전두성,이광민 대한영상의학회 2017 대한영상의학회지 Vol.76 No.2
Ectopic prostatic tissue (EPT) outside the male genitourinary tract is an unusual finding, and it is very rarely found in the rectum or around the peri-rectal region. In addition, the radiologic features of EPT are seldom reported. Also, it is difficult to differentiate EPT found in the rectal subepithelium from the other types of subepithelial tumors. We present here a unique case of EPT found in the retrorectal region, along with the radiologic findings of transrectal ultrasonography, computed tomography, and magnetic resonance imaging with their pathologic correlations.
Powder Blasting을 이용한 Fused Silica Glass의 미세채널 가공
장호수,윤대진,전두성,이정원,박동삼 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-
The old technique of sandblasting which has been used for paint of scale removing, de burring and glass decorating has recently been developed into a powder blasting technique for brittle materials, capable of producing micro structures larger than 100㎛. Recently, this technique is applied to fabrication of the microchannel for fuel cell processor and lab-on-a chip. This paper describes the performance of powder blasting in micromachining of microchannel of fused silica glass and the effect of blasting conditions such as the number of nozzle scanning and the size of abrasive on the erosion depth.
설명진,노경희,김영준,전두성 대한영상의학회 2017 대한영상의학회지 Vol.76 No.1
Multiple intrahepatic arterial aneurysms and spontaneous aneurysmal rupture associated with polyarteritis nodosa leading to hemoperitoneum are extremely rare occurrences, but the conditions can be life-threatening if left untreated because of the risk of massive hemorrhage. We report a case of a high-risk surgical patient with polyarteritis nodosa complicated by spontaneous rupture of multiple intrahepatic arterial aneurysms. He was initially treated with emergency gelatin sponge particle embolization, followed by maintenance steroid treatment. Complete resolution of intrahepatic arterial aneurysms was observed at follow-up.