http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
실리카 퓸을 이용한 자동차용 탄소섬유강화복합재의 인성 강화
임성묵,유재상,이원오,Lim, Sungmook,Yu, Jaesang,Lee, Wonoh 한국교통대학교 융복합기술연구소 2018 융ㆍ복합기술연구소 논문집 Vol.8 No.1
The age of electric vehicle is coming. One of the most important problems to be solved for popularization of electric vehicle is fuel economy. To increase fuel economy of electric vehicles, it is necessary to improve the performance of the battery or the car body should be lighter than now. To solve the problem of the car body, change the car body's material to carbon fiber reinforced composites can be an excellent answer. However, the part made from carbon fiber reinforced composites is vulnerable to accidents due to their high brittleness. In this study, ductile silica fume was added into the carbon fiber composites to enhance toughness. To examine this, various amounts and sizes of silica fume were considered and the toughness enhancement was examined by performing tensile tests.
IEEE 802.11p 기반 차량 간 통신 시스템에서 차량 밀도에 따른 MAC 계층의 성능 평가
임성묵(Sungmook Lim),고균병(Kyunbyoung Ko) 한국정보기술학회 2016 한국정보기술학회논문지 Vol.14 No.8
In V2V communication using the IEEE 802.11p-based WAVE (Wireless Access for Vehicular Environments) standards, the MAC (Medium Access Control) layer uses contention-based EDCA (Enhanced Distributed Channel Access) to suport the reliable communication of traffic with high priority by guaranteeing QoS (Quality of Service) of data. In this paper, we evaluate the performances of throughput and delay of IEEE 802.11p MAC layer according to vehicles’ density in V2V communication. Numerical results show that throughput decreases and delay increases as vehicles’ density increases. In addition, it is confirmed that performances of throughput and delay are more degraded as the number of vehicles transmitting traffic with higher priority increases when mixing vehicles with various priority.
팽창 흑연의 전압 변환법을 이용한 전기화학 박리 그래핀 제조
임성묵(Sungmook Lim),이원오(Wonoh Lee) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
그래핀은 뛰어난 물성으로 인해 다양한 분야에서 주목을 받고 있으며, 많은 연구가 이루어지고 있고, 그에 따라 생산 방법도 다양해지고 있다. 다양한 그래핀의 생산 방법 중 전기화학 박리법은 다른 제조방법에 비해 순도 높은 그래핀을 저렴하게 대량생산할 수 있다는 장점을 가지고 있으며 박리 공정에서 전기화학적 활성화를 이용하기 때문에 친환경적으로 그래핀의 생산이 가능하다. 그러나 기존의 전기화학 박리법은 고정된 정전압을 이용하기 때문에 인터칼레이션 도중 흑연 층의 선단에서 전해질 이온이 적체되는 현상을 해결할 수 없고 이로 인해 얻어지는 그래핀의 수율 및 품질이 저하되는 문제가 발생할 수 있다. 본 연구에서는 이러한 층간 삽입 이온의 병목현상을 해결하고자 양전압과 음전압을 반복적으로 변환하여 인가하는 전압 변환법을 개발하였고, 이를 층간 간격을 팽창시킨 흑연에 적용하여 기존의 정전압 및 벌크 흑연을 이용한 방식으로 생산한 그래핀과 비교하였다. 그 결과 전압 변환법 및 팽창 흑연을 이용한 그래핀이 기존의 방식에 비해 최대 600% 넓고(17.1 ㎛), 50% 얇으며(2.3 nm), 10 배 이상 향상된 전기전도도(812 S cm<sup>–1</sup>)를 10 배의 수득률(3.21 mg min<sup>–1</sup>)으로 생산할 수 있음을 확인하였다. 이러한 연구 결과는 전압 변환법을 적용한 전기화학 박리법이 높은 품질의 그래핀을 효율적으로 생산할 수 있을 것이라고 기대될 수 있다. Graphene has been hailed as a miracle material due to its extraordinary properties according to honeycomb lattice carbon atom structure, and its production process varies depending on its quality and production cost. Compare to chemical vapor deposition (CVD) method, mechanical exfoliation, and chemical oxidation, the electrochemical exfoliation can produce high quality graphene sheets with lower price. In addition, electrochemical exfoliation is an environmentally friendly method that use chemical activation, so it does not need any harsh chemicals, which occur additional purification step. In this study, to make higher quality graphene sheets than those from the conventional electrochemical exfoliation method by constant DC (cDC) (1), a diverted DC (dDC) with microwave-assisted expanded graphite (EG) is proposed, which enables more efficient intercalation between graphite layers. The results show that the graphene sheets by the dDC exfoliation have 600% larger area, 50% thinner thickness, 10 times higher electrical conductivity than those by the cDC method. Consequently, dDC method can lead more effective intercalation in exfoliation process and produce higher quality graphene sheets than the conventional method. Therefore, the dDC method with EG has great potential for mass production of high-quality graphene sheets.
퍼지 선형계획법 해법 및 퍼지 DEA에의 적용에 관한 연구
임성묵(Sungmook Lim) 한국산업경영시스템학회 2008 한국산업경영시스템학회지 Vol.31 No.2
A solution method for fuzzy linear programs is proposed. A fuzzy linear program is converted to a crisp linear program with average indices being applied to the objective function and constraints. A comparative analysis between the proposed average index approach and the possibilistic approach is given. As an application example, the proposed method is applied to the linear programming model for fuzzy data envelopment analysis, and the result is compared with that of the possibilistic approach.