http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임무생 대한전기학회 1995 전기의 세계 Vol.44 No.10
가전기기의 진동과 소음은 제품의 고품질화에 상당히 저해되고 진동에 의한 소음이나 소음에 의한 진동을 해석하기 위하여 부단하게 노력하고 있다. 소리를 음이라 하며 음의 발생을 매질의 움직임에 의한 에너지 전달로 이해하고 있다. 따라서 음은 파동을 가지게 되어 음파(sound wave)로 불리우는 파에 의해 이동되며 이동시 주위의 매질에 압력 파동을 유발시킨다. 따라서 실내에서 발생하는 소리와 목욕탕등에서 나는 소리는 매질의 다른 성질(공기밀도)에 의해 다르게 느껴진다. 일반적으로 음의 주파수라하면 1초동안 음의 고저가 몇번 발생하였는가를 의미하며 사람이 소리로서 느끼는 주파수 범위를 20Hz에서 20kHz로 나타내어 가청 주파수라 한다. 그러나, 소리중에서도 사람에게 불쾌감을 일으키거나 심하면 고통까지 유발시키는 원하지 않는 소리가 있는데 이를 소음(noise)이라 부른다. 가전기기의 중요 소음 발생원이 유체소음, 전자기소음, 기계적소음, 연소소음등 소음원의 종류에 따라 저소음기술을 해석하는데 상당한 차이가 있다. 따라서 사용조건별 설정기준을 정하고 설정기준에 따른 현상소음 lavel보다 약 10dBA보다 낮은 소음 목표치로 설계되어야 한다.
임무생 대한기계학회 1993 大韓機械學會誌 Vol.33 No.1
본 해설에서는 가정용 진공청소기에서 일반적으로 사용되는 진동 . 소음 측정기법과 진공청소 기의 저소음화를 위해 별도로 고안된 흡음방이 장착된 진공청소기에 대한 측정예를 소개하였다. 본 해설에서 다룬 흡음방은 일반적인 소음기의 원리를 응용한 장치로서 저소음화가 특히 요구 되는 가정용 진공청소기의 효과적인 차음장치로 사용가능함도 확인하였다. 추가적으로 진행될 과제는 흡기구에서 배기구에 이르는 진공청소기 본체 내부의 긴유로에 대한 개선과 흡음방 내에 부착되는 보다 우수한 흡음제의 개발, 진공청소기의 전 부분에 대한 기밀유지 등이 있을 수 있 으며, 위의 분야에 대한 추가적인 지식들이 보강된다면 흡음방의 효과를 보다 높일 수 있는 전체 시스템이 형성될 수 있을 것이다. 음 저감의 효과를 감안할 때 수용 가능한 정도라 판단된다.
세탁기용 강제 현가시스템의 동특성 해석을 위한 전산 시뮬레이션
정경렬,이종범,임무생,윤종만 한국소음진동공학회 1993 소음 진동 Vol.3 No.1
In this study, we identify the structural dynamic characteristics of the rigid body suspension system of waching machine containing rotating system, and consider the methods for the reduction of noise and vibration due to the structural problems. The structural dynamic characteristics of the suspension system have been studied by the computer simulation, in which the commercial software package, 'DYMES(Dynamics of Mechanical System)' is used. The behaviour of the supporter by the rotating system has been parametrically studied by computer simulation, and the force and torque which are transferred to the fixed body through the suspension bar also has been calculated. The possibility to decide the position and the stability of the rigid body suspension system for waching machine is demonstrated based on various simulation results.n results.
절연재료의 표면개질을 위한 코로나 발생기의 특성에 관한 연구
이덕출,정재희,황명환,임무생 한국전기전자재료학회 1995 電氣電子材料學會誌 Vol.8 No.4
The purpose of this research is to study on characteristics of corona ignitor which was designed for ignition of plasma, used at hard coating, surface treatment and thin film preparation, at high pressure. Corona ignitor composed of hollow type inner electrode and ring type external electrode. Though corona voltage increased with increasing distance between electrodes, corona discharge can be controlled stably. The gas flow in hollow type inner electrode and the construction between electrodes affect a length of corona flame and corona phenomenon. It is possible to ignite the . plasma, usually generated at low pressure(10 Torr), at high pressure(100 Torr) by corona ignitor.