http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이충모,함세영,현승규,정재열,Ming Liang Wei 한국지하수토양환경학회 2017 지하수토양환경 Vol.22 No.3
The numerical analysis of groundwater flow is indispensable for predicting problems associated with water resource development, civil works, environmental hazards, and nuclear power plant construction. Korea lacks public regulatory procedures and guidelines for groundwater flow modeling, especially in nuclear facility sites, which makes adequate evaluation difficult. Feasible step-by-step guidelines are also unavailable. Consequently, reports on groundwater flow modeling have low-grade quality and often present controversial opinions. Additionally, without public guidelines, maintaining consistency in reviewing reports and enforcing laws is more challenging. In this study, the guidelines for groundwater flow modeling were reviewed for three countries - the United States (Documenting Groundwater Modeling at Sites Contaminated with Radioactive Substances), Canada (Guidelines for Groundwater Modelling to Assess Impacts of Proposed Natural Resource Development Activities), and Australia (Australian Groundwater Modelling Guidelines), with the aim of developing groundwater flow modeling regulatory guidelines that can be applied to nuclear facilities in Korea, in accordance with the Groundwater Act, Environmental Impact Assessment Act, and the Nuclear Safety Act.
이충모,함세영,이철우,최성자,정상용 한국지하수토양환경학회 2014 지하수토양환경 Vol.19 No.2
The volcanic type of geothermal water is linked intimately to active or potentially active volcanoes and takes place nearthe plate boundaries. In contrast to the volcanic type, the geothermal water in Korea has a non-volcanic origin. Korea’sgeothermal water is classified into the residual magma (RM) type and deep groundwater (DG) type according to thecriterion of 35℃. This study reviewed the relationship between the physical and chemical features of the 281 geothermalwater sources in South Korea in terms of the specific capacity, water temperature, and chemical compositions of twodifferent basements (igneous rock and metamorphic rock) as well as the geological structures. According to the spatialrelationship between the geothermal holes and geological faults, the length of the major fault is considered a keyparameter determining the movement to a deeper place and the temperature of geothermal water. A negligible relationshipbetween the specific capacity (Q/s) and temperature was found for both the RM type and DG type with the greater specificcapacities of the RM- and DG-igneous types than the RM- and DG-metamorphic types. No relationship was observedbetween Q/s and the chemical constituents (K+, Na+, Ca2+, Mg2+, Zn2+, Cl−, SO42−, HCO3−, and SiO2) in the DG-igneousand DG-metamorphic types. Furthermore, weak relationship between temperature and chemical constituents was found forboth the RM type and DG type.
이충모,함세영,웨이밍량,전항탁,현승규 대한지질공학회 2016 대한지질공학회 학술발표회논문집 Vol.2016 No.1
현재 국내에서 지하수 모델링은 자원개발 및 토목공사, 환경, 원자력 등 다양한 분야에서 활용되고 있으나, 우리나라 지질 및 각 분야별에 적합한 모델링의 수행절차 또는 지침이 없는 상태이다. 이에 지하수 모델링에 대한 최소 기술수준, 검토항목이 없는 상태에서는 수행자가 단계별 체계를 수립하여 이행하는 것이 어렵고 기본적인 요건을 충족하지 못하여 검토 기간이 장기화되고 규제 일관성을 유지하기 어려워 논란을 일으킬 수 있다. 따라서 본 연구에서는 해외 3개국(미국, 호주, 캐나다)의 법적 규제력을 가지는 보고서를 정리하고 각 보고서별 모델링 수행절차에 대해 정리하였다. 미국의 Documenting Groundwater Modeling at sites contaminated with radioactive substances(USEPA, 1996) 보고서는 모델링에 관련된 세부적인 내용이 적절하게 기술되어 있는지, 연구 대상부지의 상태에 대한 상세한 정보를 제공할 수 있는 수단이 되는지를 평가하기 위함이다. 서술되어 있는 모델링 절차는 ① 모델링 목적, ② 부지특성화, ③ 개념 모델 정립, ④ 모델 적용, ⑤보정, ⑥ 예측, ⑦ 모델 검토, ⑧ 보고서 작성 및 검토의 순서로 설명한다. 호주의 Australian groundwater modelling guidelines(National Water Commission, 2012) 보고서에서는 지하수 모델은 지하수와 용질의 이동을 산정하거나 예측하는 것으로 정의하고 있으며, 보고서에서 규제하고 있는 내용은 지하수 수두와 지하수 흐름속도 모의를 위한 수학적 모델과 용해된 물질의 농도와 이동 모의에 중점을 둔다. 서술되어 있는 모델링 절차는 ① 초기 계획단계, ② 개념 모델 정립 단계, ③ 설계와 구축 단계, ④ 보정, ⑤ 예측, ⑥ 불확실성 분석, ⑦ 보고서 작성 및 검토의 순서로 설명한다. 캐나다의 Guidelines for Groundwater Modelling to Assess Impacts of Proposed NaturalResource Development Activities(British Columbia Ministry of Environment, 2012) 보고서에서는 천연자원 사업에 의한 영향을 평가하기 위한 지하수 모델링의 지침을 제공한다. 서술되어 있는 모델링 절차는 ① 규제법과 관련된 지하수 모델링 배경, ② 천연 자원 사업의 영향 평가를 위한 지하수 모델 적용, ③ 개념 모델 개발, ④ 수학적 모델 선정, ⑤ 수치 모델 확립, ⑥ 모델 보정 및 검증, ⑦ 모델 예측과 불확실성, ⑧ 보고서 작성 및 검토의 순서로 설명한다. 현재 국내 관련법에서는 원자력 안전법의 원자로시설 등의 기술기준에 관한 규칙과 원자력안전위원회 고시에 의해 명시되어 있는 내용들에서 지하수 모델링에 대해 직접적으로 언급하지는 않지만, 명시된 내용을 충족시키기 위해서 필수적으로 지하수 모델링이 수행되어야 한다. 따라서 미국, 호주, 캐나다의 관련 보고서를 분석함으로 국내 실정에 적합한 모델링 절차 수립에도움을 줄 수 있을 것으로 판단된다.
尹忠模,조종덕 瑞逸專門大學 1994 論文集 Vol.12 No.-
The primary advatage of TCM over modulation schemes employing traditional error-correction coding was the abilituy to achive increased power efficiendy without the custiomary expation of bandwidth introduce by the coding process. Thus, channels that were power-limited and bandwidth-limited were an ideal application for TCM. Digital communication systmes have a definite structure and knowledge of this structure is helpful in understanding the role of coding and moddulation system. Error probability of digital communication depends on Euclidean distance(E-1) between two signals. Therefor, a major point lies in how to increase Euclidean distance. The trellis coded modulation(TCM) can obtain increased Euclidean distance because of two new concepts and a dependent relationship betweem modulated signals selectred by the state of the convoltional encoder and decision depth. At the demodulator, maximum liklyhood decoder using Soft Decision of viterbi Algorithm is used to detect the most likelyhood path in trellis diagram In this paper, TCM using 8-PSK is constructed and compared with 8-PSK. We know that the TCM can obtain coding gain from 3dB to 6dB without expanding bandwith, depending onthe number of the state and decision depth of the convolutional encoder