http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PAN계 탄소섬유 제조조건에 따른 리튬이온 이차전지 음극의 전기화학적 특성
안근완,이중기,이승원,김영대,조원일,주재백,조병원,박달근,윤경석,An K. W.,Lee J. K.,Lee S. W.,Kim Y. D.,Cho W. I.,Ju J. B.,Cho B. W.,Park D. G.,Yun K. S. 한국전기화학회 1999 한국전기화학회지 Vol.2 No.2
Polyacrylonitrile(PAN)섬유를 원료로 여러 가지 조건하에서 탄소섬유를 제조하여 리튬이온 이차전지 음극 활물질로 사용하여, 전지의 충$\cdot$방전 특성과 전기화학적 특성을 고찰하였다. 음극활물질 제조에 있어서 고려한 주요한 변수들은 탄화 열처리 온도(HTT : heat treatment temperature), 탄화시의 가스분위기와 안정화(stabilization)시 섬유 축방향으로 가해주는 장력이며, 제조된 탄소섬유의 물성 및 전기적 특성 역시 조사하였다. 본 연구에서 사용한 열처리 온도 범위는 $700^{\circ}C\~1500^{\circ}C$로서, 처리온도가 상승 할 수록 전도성은 비례하여 향상되었으나, 900"C 범위는 아직 낮은 전도성을 보였다. 또한 처리온도 증가에 따라 충 방전효율은 증가하는 반면, 충 방전용량은 감소되는 경향을 보였다. 그리고 탄화시의 가스 분위기에 따라서 제조되는 음극활물질의 전지특성에 영향을 받았다. 특히, 다른 가스 분위기 하에서 제조된 PAN계 전극들의 측정된 리튬이온의 확산계수 값은 전지의 충$\cdot$방전 특성과 일치하는 결과를 보였다. 탄화시 서로 다른 가스분위기에서 탄소섬유 표면상에 형성된 다양한 기능기그룹(surface functional group)들이 리튬이온과의 비가역적 반응이 진행되는 사실을 간접적으로 확인하게 해준다. 산화분위기에서의 안정화시의 PAN섬유에 가해지는 장력은 가교 결합 중에 형성되는 분자의 배향을 유지시켜 주는 역할을 하는데, 안정화처리 후에도 섬유의 길이변화가 없는 장력조건 (fixed-length condition)에서 충 방전효율 및 용량과 사이클 안정성이 우수한 것으로 나타났다. Poly-acrylonitrile (PAN) based carbon fibers were stabilized under various tensions in the presence of air at about $200^{\circ}C$ and sequentially carbonized under some different gas environments in the range of 700 to $1500^{\circ}C$. The prepared carbon fibers were used for rechargeable lithium ion battery anode to investigate preparation parameters effects on electrochemical characteristics. It was found that the tension during stabilization, carbonization temperature and gas atmospheres affect the carbon fiber properties such as conductivity, mechanical strength, surface morphology and diffusion coefficient of lithium ion, which are closely related to the on electrolchemical properties as well as the charge/discharge characteristics.
광통신용 1.3 ㎛ Ridge Waveguide Distributed Feedback Laser Diode의 제작과 특성 평가
박경현(K. H. Park),이중기(J. K. Lee),장동훈(D. H. Jang),유지범(J. B. Yoo),강승구(S. K. Kang),김홍만(H. M. Kim),이용탁(Y. T. Lee),박형무(H. M. Park),조호성(H. S. Cho),홍창희(T. Hong) 한국광학회 1994 한국광학회지 Vol.5 No.1
발진파장이 1.3 ㎛인 Ridge Waveguide Distributed Feedback Laser Diode(RWG-DFB-LD)를 제작하고 특성을 평가하였다. 회절격자 형성은 광간섭무늬 노광법을 이용하였고 결정성장은 LPE로 수행하였다. 제작된 RWG-DFB-LD의 발진 임계전류는 67 ㎃이었고, 1296.5 ㎚ 파장에서 측모우드 억제율 30 dB 이상으로 단일 종모우드로 발진하였다. 금지대역폭 측정에 의한 회절격자 결합계수(k)는 40 ㎝-¹로 평가되었다. 소신호 변조특성평가 결과 제작한 RWG-DFB-LD는 1.2 Ith에서 1.99 ㎓의 변조대역폭(f_(-3dB)) 특성을 보였다. We fabricated and characterized RWG-DFB-LDs emitting at 1.3 ㎛ wavelength. For fabrication of the laser diode, inteference fringe of optical beams was used for grating formation and epi layers were grown by LPE. The fablicated RWG-DFB-LD operated in a single longitudinal mode with more than 30 dB SMSR at 1296.5 ㎚ emitting wavelength and its threshold current was 67 ㎃. Coupling coefficient (k) was estimated as 40 ㎝-¹ by means of stop-band measurement. Finally, we show that the RWG-DFB-LD fabricated in this experiment can be applicable as light source of 2.5 Gbps optical communication system from the fact that the small signal response of the RWG-DFB-LD rated up to 1.99 ㎓ at pre-bias level of 1.2Ith.
2.5 Gbps 광통신용 Distributed Feedback Laser Diode(DFB - LD) 모듈 제작 및 광송신 실험
박경현(K. H. Park),강승구(S. G. Kang),송민규(M. K. Song),이중기(J. K. Lee),조호성(H. S. Cho),장동훈(D. H. Jang),박찬용(C. Y. Park),김정수(J. S. Kim),김홍만(H. M. Kim),박형무(H. M. Park),한정희(J. H. Han),심창섭(C. S. Shim) 한국광학회 1994 한국광학회지 Vol.5 No.3
DFB-LD 칩으로부터 단일모드 광섬유 부착 2.5 Gbps 광통신용 광원인 DFB-LD 모듈을 설계, 제작하였다. DFB-LD 모듈은 광 isolator가 삽입된 2 렌즈 quasi confocal 광학계로 구성된 원통형 서브 모듈과 14 pin butterfly 패키지가 분리된 구성으로서 이들 사이의 전기적 연결은 bias-T 회로가 형성된 하이브리드 기판으로 이루어지도록 설계하였다. 모듈 제작시 정밀한 부품 고정이 요구되는 서브 모듈 조립에는 레이저 웰딩 방법을 사용하였다. 제작된 DFB-LD 모듈은 광결합 효율 20%, -3dB 소신호 변조 대역폭 2.6 ㎓ 이상의 특성을 가졌으며, 온도 순환검사에도 10% 이내의 광출력 변동만을 보임으로써 기계적 신뢰성을 확인할 수 있었다. 제작된 DFB-LD 모듈의 광송신 성능을 실제 2.5 Gbps 광통신 시스템의 광원으로 적용하여 평가한 결과 47 ㎞의 광섬유 전송시 BER 1×10^(-10) 조건에서 최대 -30.2 dBm의 수신감도를 얻었으며, 이 때 전송페널티는 소광비에 의한 것이 1.5 dB, 분산에 의한 것이 1.0 dB로 나타났다. We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit.<br/> Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and -3 dB small signal response of more than 2.6 ㎓. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of -30.2 dBm was obtained through 47 ㎞ optical fiber transmission under the criterion of 1×10^(-10) BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber.
한의정(E.J. Han),최훈근(H . G. Choi),이재안(J. A. Lee),김규연(K. Y. Kim),이중기(C. K. Lee),박귀환(K. H . Park),배재근(C. G. Phae) 유기성자원학회 2000 유기물자원화 Vol.8 No.1
일반항목의 분석에서는함수율및 유기물농도에 있어서 처리장별 업종별로큰차이는없었으며,유기물함량과함수량간에 상관관계는높지 았았다. 중금속항목에 대한오염기여도를보면 하 폐수및 사업장오니의 42건 중 비료관리법의 기준을초과하는것은주로As, Hg 및 Cr 이었으며,As는 42건중 28건 (67%),Hg는 21 건 (50%) 및 Cr은 9건 (21 %)으로나타나다른항목보다상대적으로많이 오염되는것으로특성을파악할수있었다. 상기와같은분석항목외에 선진국의 일부국가에서 규제하고 있는기타중금속및 유해성 유기화합물 대하여 분석한결과,Be, Se,Mo등외국에서 규제하고있는농도에 비교해서는아직까지 낮은농도로검출되었으며유기화합물중에 PCBs는 10건시료평균은 26.2ppb 였으며 가장높은값은하수처리종말처리사업소발생한오니 로서 162.6ppb이었고,낮은곳은 피혁제조업의하수오니로서 2.1 4ppb 이었다. 각종슬러지에 의하여 생산되어 유통되고 있는시료를수거하여 분석한결과,대부분규제값을만족하고있었으나 크롭에서 농도에 상회하는제품이 있었다. 현재의 각종유해물질에 의하여 재자원화에 장해가되는오염물질이 다수관찰된것으로앞으로면밀한검토를통하여 용도별사용이 필요하며,각종슬러지의 재활용을위해서는규제값을상회하는처리업소에서는특정성분의 발생억제를통한오염물의 저감노력도필요할것이다. In me analysis of the common caregories, moisrure conrenrs and organic concenrrarions were nor much different according to the rypes of indusrry or rrearmenr faciliries. When heavy merals conrribucion of the sludge from domesric and indusrrial wasrewarer rrearmenr faciliries was analyzed, As, Hg and Cr concenrrarions were relacively high among 42 srandards of the fertilizer law. As concenrracion was higher in 28 of 42 facilicies (67%) 타1an limirs of me fertilizer law. Hg concenrrarion was not acceprable in rhe 21 of 42 facilities (50%). Cr concenrration was nor acceprable in 9 of 42 facilicies (21 %). From mese resulrs, Ir is found mar As is 버e mosr frequenrly derecrable componenr and conr잉ninanr 버an any omer heavy merals in sludges The dara from experiment was also compared wim me gilldelines of harmful organics and the rest of heavy merals that are regulared by some of the foreign counrries. Be, Se and Mo concenrracions were lower than the limirs. Among me organics, me average concenrration ofPCB (10 samples) was 26.2 ppb. The highesr concenrrarion was 162.6 ppb in me sludge of the municipal wasrewarer rrearmenr faciliries and me lowesr concenrrarion was 2.14 ppb from me skin manufacruring indusrry. From the leaching analysis of re-manufucruring goods from the sludge, mosr of mem was acceprable on me regularion law but Cr concenrration was over me limit.
광통신용 1.55 ㎛ PBH - DFB - LD 스펙트럼 특성
장동훈(D. H. Jang),이중기(J. K. Lee),이승원(S. W. Lee),박경현(K. H. Park),김정수(J. S. Kim),김홍만(H. M. Kim),황인덕(I. D. Hwang),박형무(H. M. Park),조호성(H. S. Cho),홍창희(T. Hong) 한국광학회 1994 한국광학회지 Vol.5 No.1
LPE와 간섭노광법을 이용하여 1.55 ㎛ 파장의 InGaAsP/InP PBH-DFB-LD를 제작하고 스펙트럼 특성을 평가하였다. 제작된 PBH-DFB-LD의 발진 임계전류는 15 ㎃ 이하이며, 1.55 ㎛ 파장에서 광출력 7 ㎽ 이상까지도 단일 종모우드로 동작하였으며 측모우드 억제율 35dB 이상을 얻었다. 본 연구에서 제작된 PBH-DFB-LD 발진파장의 온도 의존 특성은 0.9Å/℃이며, 금지대역폭 측정에 의한 회절격자의 결합계수(k)는 97 ㎝-¹로 평가되었다. PBH-DFB-LD emitting at 1.55 ㎛ wavelength has been fabricated for 2.5 Gbps optical fiber communications. For fabrication of PBH-DFB-LD, inteference expose for grating formation and 3-step LPE epitaxial growth was used. Fabricated PBH-DFB-LD operates in single longitudinal mode with more than 35dB SMSR and its threshold current is less than 15 ㎃. The operating wavelength is 1530~1550 ㎚ with the temperature dependence of 0.9Å/℃. Coupling coefficient(k) was estimated as 97 ㎝-¹ by means of stop-band measurement. PBH-DFB-LD fabricated in this experiment can be applicable as light source for 2.5 Gbps optical fiber communication system.