http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이준명,두정훈,민준기,하만영,손창민 대한기계학회 2016 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.30 No.3
Diverse cross-corrugated surface geometries were considered to estimate the sensitivity of four variants of k-ε turbulence models (Low Reynolds, standard, RNG and realizable models). The cross-corrugated surfaces considered in this study are a conventional sinusoidal shape and two different asymmetric shapes. The numerical simulations using the steady incompressible Reynolds-averaged NavierStokes (RANS) equations were carried out to obtain the steady solutions of the flow and thermal fields in the unitary cell of the heat exchanger matrix. In addition, the experimental test for the measurement of local convective heat transfer coefficients on the heat transfer surfaces was performed by means of the Transient liquid crystal (TLC) technique in order to compare the numerical results with the measured data. The features on detailed flow structure and corresponding heat transfer in the unitary cell of the matrix type heat exchanger are compared and analyzed against four different turbulence models considered in this study.
MEMS 공정을 통한 마이크로 Pb(Zr,Ti)O<sub>3</sub> 박막 압전 외팔보 에너지 수확소자의 제작 및 특성 연구
이준명,천인우,김문근,권광호,이현우,Lee, Junmyung,Chun, Inwoo,Kim, Moonkeun,Kwon, Kwang-Ho,Lee, Hyun Woo 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.11
In this study, we fabricated a micro $Pb(Zr,Ti)O_3$ (PZT) film piezoelectric cantilever with a Si proof mass and dual beams through MEMS process. The size of the beam and the integrated Si proof mass were about $4,320{\mu}m{\times}290{\mu}m{\times}12{\mu}m$ and $1,380{\mu}m{\times}880{\mu}m{\times}450{\mu}m$ each. To reduce the air damping and have the larger displacement of dual beams was used for design. After mounting micro PZT film piezoelectric cantilever on shaker, we measured the resonance frequency and a output voltage while making resonant frequency changed. The resonant frequency and the highest average power of the cantilever device were 110.2 Hz and 0.36 ${\mu}W$ each, at 0.8 g acceleration and 23.7 $k{\Omega}$ load resistance, respectively.
레이저 검출용 고감도 실리콘 포토다이오드 제조 및 특성 분석에 관한 연구
이준명,강은영,박건준,김용갑,Lee, Jun-Myung,Kang, Eun-Young,Park, Keon-Jun,Kim, Yong-Kab 한국전자통신학회 2014 한국전자통신학회 논문지 Vol.9 No.5
In order to improve spectrum sensitivity of photodiode for detection of the laser wavelength at 850 nm ~ 1000 nm of near-infrared band, this study has produced silicon-based photodiode whose area is $5000{\mu}m{\times}2000{\mu}m$, and the thickness is $280{\mu}m$. It was packed by the TO-5 type. The electrical properties of the dark currents have valued of approximately 0.1 nA for 5 V reverse bias, while the capacitance showed 32.5 pF at frequency range of 1 kHz and about 32.4 pF at the range of 200 kHz for 0 V. In addition, the rising time of output signal was as fast response as 20.92 ns for 10V. For the optical properties, the best spectrum sensitivity was 0.57 A/W for 890 nm, while it was relatively excellent value of 0.37 A/W for 1,000 nm. Over all, there were good spectrum sensitivity for this diode over the range of 870 ~ 920 nm. 본 논문에서 850nm~1000nm 파장대역에서 레이저를 검출하기 위한 고감도 실리콘 포토다이오드를 제조하고 전기적 및 광학적 특성을 분석하였다. 소자의 크기는 $5000{\mu}m{\times}2000{\mu}m$이며 두께는 $280{\mu}m$로 제조하여 TO-5 형태로 패키징 하였다. 전기적 특성으로 암전류는 5V 역 전압 일 때 0.1nA의 값을 나타내었으며 정전용량은 0V일 때 1kHz 주파수 대역에서 32.5pF와 200kHz 주파수 대역에서 32.4pF로 적은 정전용량의 값을 나타내었다. 또한 출력신호의 상승시간은 10V의 전압일 때 20.92ns로 고속 응답특성을 확인하였다. 광학적 특성으로는 890nm에서 최대 0.57A/W의 분광감응도를 나타내었고 1000nm에서는 0.37A/W로 감소한 분광감응도를 나타내고 있지만 870nm~920nm 파장대역에서는 비교적 우수한 분광감응도를 나타내었다.
Silicon기반 고감도 PIN Photodiode의 전기적 및 광학적 특성 분석
이준명,강은영,박건준,김용갑,황근창,Lee, Jun-Myung,Kang, Eun-Young,Park, Keon-Jun,Kim, Yong-Kab,Hoang, Geun-Chang 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.6
근적외선 파장대역 850 nm ~ 1000 nm에서 레이저를 검출하기 위해 포토다이오드의 분광감응도를 향상시키고자 본 논문에서 실리콘 기반 고감도 PIN 포토 다이오드를 제작하고 전기적 및 광학적 특성을 분석하였다. 제작된 소자는 TO-18형으로 패키징 하였고 포토다이오드의 전기적 특성으로 역 바이어스 전압이 5V일 때 암전류는 Anode 1과 Anode 2는 약 0.055 nA 의 값을 나타내었으며 정전용약은 0V 일 때 1 kHz 주파수 대역에서 약 19.5 pF, 200 kHz 주파수 대역에서 약 19.8 pF의 적은 정전용약을 나타내었다. 또한 출력신호의 상승시간은 10 V의 전압일 때 약 30 ns의 고속 응답특성을 확인하였다. 광학적 특성 분석으로는 880 nm에서 최대 0.66 A/W의 분광감응도 값을 나타내었고 1000 nm에서는 0.45 A/W로 비교적 우수한 분광감응도를 나타내었다. In order to improve spectrum sensitivity of photodiode for detection of the laser at 850 nm ~ 1000 nm of near-infrared wavelength band, this study has produced silicon-based fast film PIN photodiode and analyzed electrical and optical properties. The manufactured device is packaged in TO-18 type. The electrical properties of the dark currents both Anode 1 and Anode 2 have valued of approximately 0.055 nA for 5 V reverse bias, while the capacitance showed 19.5 pF at frequency range of 1 kHz and about 19.8 pF at the range of 200 kHz for 0 V. In addition, the rising time of output signal was verified to have fast response time of about 30 ns for 10 V. For the optical properties, the best spectrum sensitivity was 0.66 A/W for 880 nm, while it was relatively excellent value of 0.45 A/W for 1,000 nm.
LED 조명 기반 미디어 전송기법 가시광통신 시스템 모듈 설계 및 효율 연구
이준명(Lee, Jun-myung),권재현(Kwon, Jae-hyun),최정원(Choi, Jung-won),박건준(Park, Keon-Jun) 한국정보전자통신기술학회 2013 한국정보전자통신기술학회논문지 Vol.6 No.1
본 논문에서는 LED 조명을 기반으로 미디어 전송기법 가시광통신 시스템 모듈 설계 및 효율 연구와 성능분석을 하였다. 고휘도 Withe LED조명을 이용한 가시광통신(Visible Light Communication) 송 수신기 모듈을 통해 미디어 전송 시스템을 구현하기 위해 송신부에는 1~12개의 LED 발광 소자와 수신부에는 PD(Photo Diode)센서를 구성하여 전송속도에 따른 최대 송 수신의 통신 거리를 실험해 보고자 가시광통신 시스템을 제안하였다. 또한 미디어 전송 시스템의 효율을 증대시키기 위해 LED모듈에 렌즈 착용시와 미착용시 각각의 성능을 측정하여 약 20%의 효율이 증가하였음을 확인 할 수 있었다. In this paper, we had design the module of the LED-based media transmission mechanics visible light communication system. To implement the media transmission system through visible light communication transmitter, receiver module the using high brightness, we proposed visible light communication system to implement communication distance of up to a maximum transmitter-receiver distance using a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter. It was increased efficiency of approximately 20% by measuring the performance during lens wearing or not wearing on the LED module to improve the efficiency of the media transmission system.