http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이종일,도동섭,차왕석,오광중 고려대학교 공학기술연구소 1993 고려대학교 생산기술연구소 생기연논문집 Vol.29 No.1
A composite base metal oxide catalyst which consists of manganese dioxide and silver oxide was developed. Catalytic properties with thermal degradations and preparation methods were investigated using the oxidation reaction of carbon monoxide. It is shown that catalytic reactivity is dependent of oxidation state of each metal oxide and metal oxide catalyst has some advantage compare to the commercial platinum catalyst in the initial state.
시뮬레이션을 통한 1500 MPa급 강재의 저항 용접 특성 (II)
이종중(Jong-Jung Lee),손창석(Chang-soek Son),박영환(Young Whan Park) 대한용접·접합학회 2018 대한용접·접합학회지 Vol.36 No.3
As environmental regulations and car safety regulations have been strengthened globally, automobile industry have tried to overcome these regulations. One of solutions is to apply various High Strength Steel (HSS) to car body, which reduce the weight of car bodies and increases its strength. However, the combination of lecture type and thickness are very various and it will take a lot of time to conduct welding evaluation through experiments. In order to solve these problems, evaluation of resistance spot welding is being performed using simulation. In this study, resistance spot welding was simulated to produce nugget diameter of 1500 MPa steel. As a result, a lobe curve can be obtained and a two regression model is proposed as a model that can predict the nugget diameter of the welded part. We also proposed a two regression model with minimized input arguments. The performance of these models was evaluated in terms of the coefficient of determinant and average error rate.
Plasma-MIG 하이브리드 용접에서 용적 이행모드 현상 모니터링에 대한 연구
이종중(Jong Jung Lee),박영환(Young Whan Park) 대한용접·접합학회 2017 대한용접·접합학회지 Vol.35 No.3
Recently in the welding field, the establishment of unmanned and automated systems are rapidly developing. Accurate interpretation of the welding phenomenon is applied a number of monitoring systems. In this paper, butt welding (6t) type I using Plasma-MIG welding was carried out. And we evaluated characteristics of the Al-5083 aluminium alloy in Plasma-MIG hybrid welding. Process variables including the plasma current, MIG voltage, wire feeding rate and the welding speed were used. Butt welding was conducted 1 pass. Argon gas was used as the protective gas that results from the experiment were able to achieve full penetration. In addition to monitoring the welding process occurring during MIG welding current, welding votage and Plasma current, voltage were collected in real time, the photodiode and CCD cameras observing the phenomenon that the welding is in progress were measured using a quantity of light.
고출력 파이버 레이저를 이용한 Cu-Al 이종소재 용접의 용접 특성 분석 및 공정 최적화
정기쁨(K. P. Jeong),이종중(J. J. Lee),정민찬(M. C. Jeong),조용준(Y. J. Cho),박영환(Y. W. Park) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
에너지 절약과 환경 보호에 대한 필요성 증가로 인해 2 차 전지용 배터리의 보급이 빠르게 확산됨에 따라 구리 자체의 용접뿐만 아니라 구리-알루미늄 이종소재 간의 용접에 대한 필요성도 함께 증가하고 있다. 2 차 전지의 용접 품질에 문제가 발생할 경우 화재 발생과 같은 위험을 야기할 수 있어, 최적화를 통한 고품질 용접부를 확보하는 것이 중요하다. 그러나 구리의 용접은 소재의 열전도율이 높아 고밀도 열원이 필요하며 용융 시 산화에 의한 가스 흡수 가능성이 높아서 기공이 형성되기 쉽다는 어려움을 가진다. 또한 구리-알루미늄 이종소재 용접의 경우 두 소재의 물리적 특성 차이가 크고, 용접 후 생성되는 금속간 화합물(Intermetallic Compound, IMC)이 취성화 및 강도 저하를 일으킬 수 있어 용접 가능 공정 범위가 매우 작다고 알려져 있다. 따라서 본 연구는 구리-알루미늄 이종소재의 레이저 용접에 대한 용접 특성 분석 및 공정 최적화를 목적으로 한다. 고출력 파이버 레이저를 이용하여 두께 0.5 t 의 C1100, Al99.5 소재에 대해 용접을 수행한 후, 레이저 출력과 용접 속도 변화에 따른 비드 형상을 관찰하였다. EDS Mapping 을 통해 용융금속의 거동과 금속간 화합물을 관찰하고 그가 용접부 품질에 미치는 영향을 분석하였으며, 2차 전지 관점에서의 품질 신뢰성 획득을 위해 인장 시험을 비롯한 기계적 특성 평가를 수행하였다. Photodiode 와 Spectrometer 를 사용하여 용접부를 모니터링하고, 획득된 신호들 간의 상관관계를 분석한 후 신호 기반 품질 판단을 수행하였다.