제대군인의 재취업 및 창업 활성화 방안에 대한 연구

이재희,하규수,김홍,Lee, Jae-Hee,Ha, Kyu-Soo,Kim, Hong 한국벤처창업학회 2007 벤처창업연구 Vol.2 No.1

This study conducted research over status of employment and living by collecting questions & answers from retired soldiers after service in ROK Army more than 5 years in last 5 years. As the methodology of this research, the status of employment has been provided from the Citizen Insurance Public Corporation, and conducted interviews for all individuals in addition to the receiving of questions & answers. Also, the statistic data prepared and submitted for Congressional Audit & Inspection from MND was also utilized for the purpose of research. In conclusion, the situation faced with retired soldiers after their retirement is showing the future of reflection of oneself to the personnel in active service who must do their best only for their duty to keep national security. If those personnel in active service are worrying about their future returning to civilian society after retirement, it will not only become an impediment to perform their duty but also bring invisible weakening of military power to defend our nation in result. This is the rationale for the necessity of providing support for social adaptation, reemployment and inauguration of retired soldiers.

불화수소산 음독에 의한 심정지 1례

이재희,정진희,어은경,Lee, Jae-Hee,Jung, Jin-Hee,Eo, Eun-Kyung 대한임상독성학회 2007 대한임상독성학회지 Vol.5 No.2

Hydrofluoric acid is a weak inorganic acid used for etching and as rust removals. Systemic toxicity after oral ingestion induces rapid development of hypocalcemia and hyperkalemia, leading to ventricular fibrillation and finally asystole. We report a case of intentional ingestion of hydrofluoric acid producing an altered mental state at the time of the patient's arrival in the emergency department. The patient died approximately 80 minutes after the exposure with asystol.

고균일 Al 박막 증착을 위한 magnetron sputtering system 개발

이재희,황도원,Lee, J.H.,Hwang, D.W. 한국진공학회 2008 Applied Science and Convergence Technology Vol.17 No.2

반도체 소자공정에서 균일한 두께의 금속박막을 증착하는 것은 매우 중요하다. 기존의 기판고정식 sputtering 장비로 증착한 indium tin oxide(ITO)박막의 두께 균일도가 $\pm4%\sim\pm5%$ 정도로 중앙부분이 더 두껍다. 방전전극 구조물을 설계하고 제작하여 sputtering되는 물질의 방향을 조절하였다. 개량된 sputtering gun을 사용하여 기판고정식 sputtering 장비에서 4" wafer 내에서 $\pm0.8\sim1.3%$ 정도로 두께 균일도를 증가시켰다. wafer to wafer에서는 $\pm$5.3%에서 $\pm$1.5%로 두께 균일도가 향상되었다. Al박막의 경우 $\pm$1.0% 이내의 두께 균일도를 얻을 수 있었다. It is very important to decompose uniformly the metal film in semiconductor devices process. The thickness uniformity of the ITO film by standard magnetron sputtering system are about $\pm4%\sim\pm5%$ and the center of the wafer is more thick than the edge of the wafer. We designed and made the discharge electrode structure and controlled the direction of sputtering materials in magnetron sputtering system. The thickness uniformity are increased to $\pm0.8\sim1.3%$ in 4" wafer using the new sputtering gun in magnetron sputtering system. In wafer to wafer thickness uniformity, $\pm$5.3% are increased to $\pm$1.5% using the new sputtering gun. The thickness uniformity of the Al film are about $\pm$1.0% using the new sputtering gun in magnetron sputtering system.

기구축 공간데이터를 활용한 3차원 건물모델의 위치정합 기법 연구 - ICP 알고리즘 구현 중심으로 -

이재희,이인수,강지훈,Lee, Jaehee,Lee, Insu,Kang, Jihun 한국국토정보공사 공간정보연구원 2021 지적과 국토정보 Vol.51 No.1

최근 스마트시티, 디지털 트윈, 자율주행, 스마트 건설 등의 분야가 발전하면서 각 분야에서 생산되는 다양한 데이터를 서로 연결하기 위한 매개체로서 공간정보의 가치가 매우 중요해지고 있다. 특히 데이터의 최신성을 위해 공간정보의 신속한 구축과 갱신이 필요하다. 본 연구에서는 정밀한 위치정확도가 이미 검증된 기구축 공간데이터를 이용하여 지상기준점 없이 제작된 영상기반 3차원 건물모델의 위치를 정합시킬 수 있는 소프트웨어 프로토타입을 개발하였다. 이 소프트웨어를 실험대상지역에 적용한 결과, 지상기준점 없이 제작된 3차원 건물모델과 기구축 공간데이터가 높은 위치 정합률을 보여 최신의 3차원 공간데이터를 필요로 하는 분야에 적용될 수 있음을 확인하였다. Spatial data is becoming very important as a medium that connects various data produced in smart cities, digital twins, autonomous driving, smart construction, and other applications. In addition, the rapid construction and update of spatial information is becoming a hot topic to satisfy the diverse needs of consumers in this field. This study developed a software prototype that can match the position of an image-based 3D building model produced without Ground Control Points using existing spatial data. As a result of applying this software to the test area, the 3D building model produced based on the image and the existing spatial data show a high positional matching rate, so that it can be widely used in applications requiring the latest 3D spatial data.

산업재해 발생이 산업생산성에 미치는 효과

이재희,임진석,박진백,Lee, Jaehee,Lim, Jin Seok,Park, Jinbaek 한국안전학회 2021 한국안전학회지 Vol.36 No.1

This study aims to analyze an influence of industrial accident on industrial productivity. We analyzed relationship among industrial accident, labor force, and industrial productivity using vector error correction model (VECM). The data used in the analysis were the number of industrial accidents, the number of workers, and index of all industry production from January 2008 to June 2017 in Korea. Finally, the industrial accidents have played a role in reducing labor force and industrial productivity.

도서관인의 명암(明暗) - 공중전화 박스 안 도서관이야기

이재희,Lee, Jae-Hui 한국도서관협회 2012 圖協會報 Vol.53 No.5

미용/의료용 유연 마이크로 발광 다이오드 디바이스 제작 공정

이재희,Jae Hee Lee 한국전기전자재료학회 2023 전기전자재료학회논문지 Vol.36 No.6

마이크로 발광다이오드(LED)는 칩 사이즈가 100마이크로미터 이하인 무기발광재료로 우수한 전기적, 광학적, 기계적 성능 때문에 유연 디스플레이, AR/VR, 바이오 메디컬 분야의 차세대 광원으로 큰 주목을 받고 있다. 특히, 바이오메디컬 분야에 적용하기 위해서는 매우 작은 크기의 마이크로 LED 칩을 원하는 유연 기판에 옮기기 위한 기술이 요구되며, 실제 인간의 얼굴, 장기 등 여러 신체 부위에 적용하기 위해서는 대량의 마이크로 LED 칩을 낮은 정밀 오차, 빠른 속도, 높은 수율로 타겟 기판에 전사하는 것이 중요하다. 본 논문의 목적은 미용/의료용 유연 마이크로 LED 디바이스 제작 공정 방법을 소개하고, 이를 실제 미용/의료 산업에 적용하기 위해 필요한 마이크로 LED 전사 기술을 소개한다. 해당 기술로 제작된 유연 마이크로 LED 디바이스는 피부 질환, 암, 신경질환 등 인간 질병 치료에 널리 활용될 것으로 기대된다. Micro light-emitting diodes (LEDs), with a chip size of 100 micrometers or less, have attracted significant attention in flexible displays, augmented reality/virtual reality (AR/VR), and bio-medical applications as next-generation light sources due to their outstanding electrical, optical, and mechanical performance. In the realm of bio-medical devices, it is crucial to transfer tiny micro LED chips onto desired flexible substrates with low precision errors, high speed, and high yield for practical applications on various parts of the human body, including someone's face and organs. This paper aims to introduce a fabrication process for flexible micro LED devices and propose micro LED transfer techniques for cosmetic and medical applications. Flexible micro LED technology holds promise for treating skin disorders, cancers, and neurological diseases.

800 MPa급 고강도강 용접금속의 미세조직 특성 비교 연구

이재희,김상훈,윤병현,김환태,길상철,이창희,Lee, Jae-Hee,Kim, Sang-Hoon,Yoon, Byung-Hyun,Kim, Hwan-Tae,Kil, Sang-Cheol,Lee, Chang-Hee 대한용접접합학회 2011 대한용접·접합학회지 Vol.29 No.1

Microstructural characteristics of two high strength (600 MPa & 800 MPa) weld metals produced by flux-cored arc welding process (FCAW) were evaluated. The 600 MPa grade weld metal was consisted of 75% acicular ferrite and 25% ferrite which was formed at relatively high temperature (grain boundary ferrite, widmanstatten ferrite, polygonal ferrite). However, the 800 MPa grade weld metal was composed of about 85% acicular ferrite and 15% low temperature forming phases (bainite, martensite). The prior austenite grain size of 800 MPa grade weld metal was decreased by solute drag force. The compositions and sizes of inclusions which are the dominant factors for the formation of acicular ferrite were analyzed by a transmission electron microscopy (TEM). In both 600 MPa and 800MPa grade weld metals, the inclusions were mainly consisted of Ti-oxide and Mn-oxide, and the average size of inclusions was $0.7{\mu}m$. The 800 MPa grade weld metal exhibited higher tensile strength and similar toughness compared with the 600 MPa grade weld metal. This result is mainly due to a higher fraction of low temperature products and a lower fraction of grain boundary ferrite in the 800 MPa grade weld metal.

보험이 경제발전에 미치는 영향

이재희,Lee, Jae-Hui 한국화재보험협회 1984 防災와 保險 Vol.22 No.-

의료산업 전망과 대응전략

이재희,Lee, Jae-Hui 대한병원협회 2005 대한병원협회지 Vol.34 No.3