http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
FTTH 구축을 위한 18채널 광 RF Overlay 방식의 기가비트 CWDM-PON 시스템 연구
최영복,김보겸,박태동,강동성,이봉완,고연완 대한전자공학회 2006 電子工學會論文誌-TC (Telecommunications) Vol.43 No.5
In this paper, we designed, constructed and evaluated the system for the FTTH suited to a residence and apartment using CWDM-PON techniques. These systems have capacity to service at 100Mbps rate to 384 users in the same breath. Also, the services include the internet, CATV, IPTV and wireless LAN. In the case of wire network, the data could be transmitted by UTP cable and optical fiber and case of wireless one, the data transmitted using WLAN. The distance between the cental office and the user is 20km and the data rate is 100Mbps maximum. Of course, the optical network used just one fiber optical core. For the basic material, we obtained the characteristics of optical transceiver module, Mux/Demux and transmission qualities depends on the environment. 본 논문에서는 CWDM-PON 기술을 이용하여 일반주택 및 아파트 또는 특정지역 내의 FTTH(Fiber to the Home)에 적합하도록 시스템을 설계, 제작, 특성시험 결과에 대한것이다. 이 시스템은 하나의 광섬유에 384 가입자가 100Mbps의 속도로 인터넷 서비스와 Overlay 방식을 적용하여 CATV를 동시에 수용 받을 수 있다. 가입자의 주거 환경에 따라 유선인 경우 UTP 또는 광섬유로 구축할 수 있으며 무선인 경우에 Wireless LAN을 이용하여 무선 인터넷 서비스도 가능 하도록 하였다. 또한, 미래의 상황에 대비하여 VoIP 서비스를 위한 유무선 솔루션을 구현하였다. 국사와 가입자간의 거리가 20Km이며, 가입자의 데이터 양은 최대 100Mbps, 최소 보장 50Mbps이고 방송과 통신을 하나의 광섬유에 실어 보낸다는 목표로 시스템을 제작하였다. 따라서 광송수신기 모듈, Mux/Demux 등의 구간별 광학적 특성을 조사하였으며 외부환경에 변화에 따른 전송 품질을 측정하였다.
분포형 라만 온도 센서의 FIR 필터를 적용한 노이즈 저감
김선우,전민용,서민성,황정민,이봉완 한국물리학회 2016 새물리 Vol.66 No.10
We report a distributed Raman temperature fiber-optic sensor (DTS) using a 1550 nm band single-mode fiber (SMF) based on optical time-domain reflectometry (OTDR). The input optical pulse is amplified through an erbium-doped fiber amplifier (EDFA) in order to enhance the effective fiber length in the Raman DTS system. We adopt a finite impulse-response (FIR) filter, which is a low-pass filter, as a digital filter to enhance the signal-to-noise ratio (SNR). Thus, we can improve the temperature resolution via signal processing. Ten, 25, and 35 km sensig distances are used to test the SMF. We achieve a spatial resolution of 4.0 m and a temperature resolution of 2.0 $^\circ$C for a fiber with a 10 km sensing light and a measurement time of 60 s. Also, we achieve the temperature resolutions of 2.7 $^\circ$C and 5.7 $^\circ$C for fibers with 25 km and 35 km sensing lengths and a measurement time of 60 s, respectively. The temperature resolution can be improved to 2.6 $^\circ$C by using a 35 km sensing length and a measurement time of 600 s. 본 연구는 광섬유에서 발생하는 펄스 신호의 라만 산란을 이용한 광 시간영역 반사법 (Optical time domain reflectometry, OTDR) 기반의 1550 nm 대역 분포형 라만 온도 센서 시스템을 보고한다. 입사하는 광 펄스의 출력을 증가시키고, 전송 거리를 증가시키기 위해 광 증폭기(EDFA)를 이용하였다. 디지털 필터인 low pass filter (finite impulse response filter, FIR filter)를 적용하여 신호 대 잡음비(Signal to noise ratio, SNR)를 향상시켰으며, 결과적으로 DTS 시스템의 온도분해능을 향상시킬 수 있었다. 탐지광섬유로 10, 25, 35 km의 단일모드 광섬유를 사용했으며 10 km에 대해서는 60초 측정 시간에서 공간분해능 4.0 m, 온도분해능 2.0 $^\circ$C를 얻어냈고, 25 km와 35 km에 대한 온도 분해능은 각각 약 2.7 $^\circ$C와 약 5.7 $^\circ$C였고, 특히 35 km에 대한 온도 분해능은 측정 시간 600초(10분)일 때 2.6 $^\circ$C로 향상되었다.