http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤천호,안병준,전학제,C. H. Yune,B. J. Ahn,Hakze Chon 대한화학회 1981 대한화학회지 Vol.25 No.1
양이온 교환 및 알루미늄 추출시킨 모더나이트와 제올라이트 Y 촉매에서 m-크실렌의 반응이 마이크로펄스방법으로 연구되었다. H-모더나이트 촉매에서 전처리온도가 높아지거나 Si/Al비가 증가할 때 동종간 주고 받기반응생성물이 크게 증가했다. $Ba^{2+}-, Mg^{2+}- $이온교환한 모더나이트촉매에서 양이온교환정도가 증가할에따라 트리메틸벤젠의 생성량이 급격히 감소했다. m-크실렌의 동종간 주고 받기반응에서는 모더나이트의 산성도의 영향과 아울러 촉매 유효세공의 크기에 따른 형상 선택성을 보여준다. Reactions of m-xylene were studied in a fixed-bed type micropulse reactor over cation-exchanged dealuminated mordenite and zeolite Y catalysts. Over H-mordenite catalysts higher catalyst pretreatment temperature as well as dealumination resulted in the increase of the formation of disproportionation product. $Ba^{2+}- and Mg^{2+}-$exchanged mordenite catalysts showed the shape selectivity in the disproportionation reaction of m-xylene, that is, the formation of trimethylbenzene decreasing sharply as the degree of cation exchange increased.
양극산화된 알루미나 주형 안에 CdS 나노선 배열의 전기화학적 제조
윤천호,정영리 한국진공학회 2001 Applied Science and Convergence Technology Vol.10 No.1
우리는 술폭시화디메틸에 $_CdCl2$와 S를 포함하는 전해질로부터 양극산화된 알루미나 막의 세공 안으로 반도체를 직접 전착하여 5$\mu\textrm{m}$까지의 길이와 20nm의 작은 직경의 균등한 CdS 나노선 배열을 제조하였다. 나노선 배열은 주사전자현미경법과 X-선회절에 의해 연구되었다. 전착된 물질은 주로 (100) 우선방위를 지닌 육방정계 CdS로 이루어져 있다. We prepared uniform CdS nanowire arrays ways with lengths up to 5 $\mu\textrm{m}$ and diameters as small as 20 nm by electrochemically depositing the semiconductor directly into the pores of anodic alumina films from an electrolyte containing $CdCl_2$ and S in dimethyl sulfoxide. The nanowire arrays were characterized by scanning electron microscopy and X-ray diffraction. The deposited materials are composed mainly of hexagonal CdS with (100) preferential orientation.
윤천호(C. Yoon),박성진(S.-J. Park),이규왕(K.-W. Lee) 한국진공학회(ASCT) 1997 Applied Science and Convergence Technology Vol.6 No.2
투명전도성 산화주석 박막이 펄스레이저증착에 의하여 파이렉스유리 기판상에 제조되었다. 진공, O₂ 및 Sn(CH₃)₄ 분위기에서 Nd-YAG 레이저 빛살이 다결정 SnO₂ 타켓을 융제하여 실온에서 기판상에 박막을 증착시키고, 증착된 막을 230, 420, 및 610℃에서 각각 2시간 동안 공기중에서 열처리하였다. 박막의 특성이 UV-VIS-NIR 분광법와 X-선 회절법에 의하여 조사되고, 전기적 성질이 촉심식법으로 구해진 막의 두께와 함께 사점 탐침법에 의하여 측정되었다. Sn(CH₃)₄이 존재할 때 SnO₂ 상들이 실온에서조차 성장되는 것이 관찰되었다. 이는 레이저 융제 동안 발생된 마이크로플라즈마가 전구물질분자의 분해에 중요한 역할을 함을 시사한다. The transparent conducting thin films of tin oxides were prepared on pyrex glass substrates by the pulse laser deposition. In the atmospheres of vacuum, O₂ and Sn(CH₃)₄ a polycrystalline SnO₂ target was ablated by Nd-YAG laser beam to deposit thin films on the substrates at room temperature, and as-deposited films were subsequently heat-treated in the air for 2 h at 230, 420 and 610℃, respectively. The characteristics of the thin films were examined by UV-VIS-NIR spectrometry and X-ray diffractometry, and the electrical properties were measured by four-point probe method along with film thickness monitored by the stylus method. It was observed that in the presence of Sn(CH₃)₄ SnO₂ phases were grown even at room temperature. This suggests that the microplasma produced during the laser ablation plays an important role in the dissociation of precursor molecules.
김상길,윤천호 ( Sang Kil Kim,Cheonho Yoon ) 한국공업화학회 1998 공업화학 Vol.9 No.2
초음파분무 열분해에 의하여 유리 기판 위에 투명전도성 산화주석막을 증착하였다. 증착변수가 산화주석막의 전기저항, 광투과도, 결정구조 및 두께에 미치는 영향을 조사하였다. 증착시간과 염화주석(IV)의 농도가 증가함에 따라, 증착된 산화주석막의 전기저항과 가시선 및 근적외선 영역에서의 광투과도가 감소함을 보여주었다. 공기중에서 열처리온도가 증가하면, 증착된 산화주석막은 전기저항과 광투과도가 증가함을 나타냈다. 본 연구결과는 초음파분무열분해가 단일과정으로서 양질의 투명전도막을 효율적으로 제조할 수 있는 유망한 증착기술임을 암시한다. The transparent conducting tin oxide films were deposited on glass substrates by the ultrasonic spray pyrolysis. Examined were effects of deposition parameters on the electrical resistance, optical transmittance, crystal structure, and thickness of tin oxide films. As both the deposition time and concentration of tin(IV) chloride increase, the deposited tin oxide films exhibited the decrease of electrical resistance and optical transmittance in the visible and near infrared region. With increasing heat-treatment emperature in air, the deposited tin oxide films showed the enhanced electrical resistanceand optical transmittance. This study suggests that the ultrasonic spray pyrolysis may be a promising deposition technique effectively to prepare transparent conducting films of good quality in a single step.
김동완,백승화,윤천호 명지대학교 자연과학연구소 2006 자연과학논문집 Vol.25 No.-
Today many people stay a lot of time sitting on chair in their life. When a sitting posture is not correct, there is some trouble with the waist. And if it goes on long time, sometimes it may cause the hurts of waist or the deformded spinal column. A crouched posture is an obstacle to breath and it can give rise to drowsiness due to the lack of oxygen. Sitting posture is a habit so people can't feel it oneself and look over some kinds of risks. We analyzed conditions of muscles by measuring EMG of both sides of spinal bones. One can have a right sitting posture by analyzing the increasing muscle tension in one or the other side of muscles when the posture inclines on one side or ahead.