http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PAN계 탄소섬유를 이용한 Carbon/Phenolic 복합재의 삭마구조 특성 연구
임연수,김동규,박인서,윤병일,Im, Yeon-Su,Kim, Dong-Gyu,Park, In-Seo,Yun, Byeong-Il 한국재료학회 1994 한국재료학회지 Vol.4 No.3
탄소/페놀릭 복합재의 삭마 미세구조와 특성에 대하여 설명하였다. 삭마현상은 추진제와 산화제 사이의 반응에 의한 수증기와 탄산가스의 몰분율에 의해 좌우된다. 그러나, 이 연구논문은 삭마현상이 탄소섬유의 직조형태, 직조밀도, tow크기에 의해서도 변화될 수 있음을 주사전자현미경, 밀도, 열전도도. 삭마표면등을 통해 설명했다. 3가지의 직조형태중, 3K8HS 직조구조가 3K twill구조나 12K8HS구조보다 우수한 내삭마성을 보임을 설명했다. The study has been conducted to know ablation microstructures and characteristics in carbon /phenolic composites. Ablation properties depend on mole fraction of $H_2O$ and $C0_2$ gas which were produced by reaction between propellant and oxidizer. However, the results of this study shown that the ablation also depended on weaving structure, density of fabric, and tow size of carbon fiber. 3K 8HS fabric showed superior ablation resistance to others, 3K twill and 12K 8HS fabric structures.
실험계획법을 이용한 탄소섬유/페놀수지의 강화 cycle연구
하헌승,이진용,조동환,윤병일,Ha, Heon-Seung,Lee, Jin-Yong,Jo, Dong-Hwan,Yun, Byeong-Il 한국재료학회 1993 한국재료학회지 Vol.3 No.5
다구찌의 실험계획기법을 이용하여 탄소섬유/페놀수지의 결화싸이클을 연구하였다. 본 연구에서는 1인자 2수준과 7인자 3수준으로 구성된 $L_{18}(2^1 \times 3_7)$ 직교배열표를 사용하였고, 특성치로 굴곡강도와 기공률을 선정하여 실험하였다. 실험계획법의 압축성형 인자로는 8개의 성형인자(승온속도, 가압온도, 성형압력, 경화온도, 경화온도에서의 유지시간, 냉각속도 및 탈기포)가 고려되었으며, 이들 성형인자가 탄소섬유/페놀수지 복합재료의 물성에 미치는 영향을 고찰하였다. 분산분석법으로 실험결과를 분석한 결과, 탄소섬유/패놀수지 복합재료의 굴곡강도에 가장 큰 영향을 미치는 성형인자는 성형압력이고, 기공률에 가장 큰 영향을 미치는 성형인자는 경화온도임이 밝혀졌다. In this paper the cure cycle of carbon fiber/phenolic resin was investigated by the Taguchi Method in an experimental design. Experiments were systematically performed using $L_{18}(2^1 \times 3_7)$ orthorgonal array table of the experimental design. In the experimental design, eight compression molding parameters (heating rate, pressing temperature, pressing rate, molding pressure, curing temperature, dwell time at curing temperature, cooling rate and degassing) were considered and the effects of the parameters on the flexural strength and the apparent porosity of carbon fiber/phenolic composites were investigated. The analysis of variance for the experimental results indicated that molding pressure and curing temperature are the most significant parmeters in the flexural strength and the apparent porosity of carbon fiber/phenolic resin composites, respectively.
탄소섬유 및 탄소복합재의 물리적/기계적 특성에 대한 고온열처리의 영향 연구
김동규,하헌승,박인서,임연수,윤병일,Kim, Dong-Gyu,Ha, Heon-Seung,Park, In-Seo,Im, Yeon-Su,Yun, Byeong-Il 한국재료학회 1994 한국재료학회지 Vol.4 No.3
PAN계 탄소섬유 roving 및 fabric을 $2170^{\circ}C$에서 열처리 하였다. 열처리를 행하지 않은 탄소섬유 fabric과 행한 것을 사용하고, Autoclave를 이용하여, CFRP와 CFRP의 성형체를 제조하였다. 열처리를 행한 탄소섬유 roving과 행하지 않은것 및 두종류의 성형체의 분석을 통하여, 열처리에 따른 탄소섬유 및 탄소복합재의 물리적. 기계적 특성변화를 연구하였다. 열처리 후 성유의 단면을 주사전자현미경으로 관찰한 결과 탄소섬유의 직경이 6.8$\mu \textrm{m}$에서 6.4$\mu \textrm{m}$으로 감소하였으며, 열중량분석을 행한 결과 내산화성이 증진되었음을 알았다. 단섬유인장실험 결과 인장강도는 탄소섬유의 (3.11$\pm 0.32)\times 10^3$ MPa 에서 열처리 섬유의 (1.87$\pm 0.26)\times 10^3$MPa으로 감소되었으나, 탄성율은 탄소섬유의 (1.94$\pm 0.06)\times 10^5$ MPa에서 열처리 섬유의 (2.02$\pm 0.11)\times 10^5$MPa으로 증가하였다. 층간전단강도 측정 실험을 한 결과 그 값이 CFRP(148.8$\pm$1.6Mpa)가 CFRP(82.2$\pm$1.1Mpa)에 비하여 높음을 알 수 있었고, torch test 결과 CFRP는 층간분리 없이 매끄러운 삭마가 일어나나, GFRP는 층간분리가 발생함을 알 수 있었다. PAN-based carbon fiber roving and fabric were heat treated at the temperature of $2170^{\circ}C$. Using non-heat treated and heat treated fabric, greenbodies of CFRP and GFRP were manufactured in the Autoclave. After the analysis of heat treated and non-heat treated carbon fiber roving and two types of greenbodies, the variations of physical and mechanical properties of carbon fibers and greenbodies with heat treatment were studied. Observing the cross-section of carbon fiber with SEM, we knew the diameter of carbon fiber was decreased from 6.8gm to 6.4p1. The results of TGA showed that the oxidation resistence was enhanced after heat treatment. The tensile strength of carbon fiber was decreased from (3.11$\pm 0.32)\times 10^3$ MPa to (1.87$\pm 0.26)\times 10^3$MPa, but tensile modulus was increased from (1.94$\pm 0.06)\times 10^5$ MPa to (2.02$\pm 0.11)\times 10^5$MPa after heat treatment. The interlaminar shear strengths of CFRP and GFRP were 148.8$\pm$1.6Mpa and 82.2$\pm$1.1Mpa, respectively. Torch test showed that CFRP was abraded smoothly but GFRP was delaminated.
비교통성 흔적 자궁각 쌍태 임신 파열 와 그 임상적 고찰
김소정 ( Kim So Jeong ),정두용 ( Jeong Du Yong ),김상윤 ( Kim Sang Yun ),윤병일 ( Yun Byeong Il ) 대한산부인과학회 2003 Obstetrics & Gynecology Science Vol.46 No.10
The uterus with rudimentary horn occurs as a result of a lack of development during fetal life of the middle and lower part of one of the Mullerian ducts, in which there is a failure of fusion of the two ducts. Pregnancy in the rudimentary uterine horn is
전현수 ( Jeon Hyeon Su ),홍혜진 ( Hong Hye Jin ),정병순 ( Jeong Byeong Sun ),윤병일 ( Yun Byeong Il ),김소정 ( Kim So Jeong ),김상윤 ( Kim Sang Yun ),신현준 ( Sin Hyeon Jun ),정두용 ( Jeong Du Yong ) 대한산부인과학회 2003 Obstetrics & Gynecology Science Vol.46 No.10
Actinomycosis, a rare disease entity in the upper genital tract, and caused by anaerobic bacteria, Actinomyces israelii, presents some difficulties in establishing a correct preoperative diagnosis. Pelvic actinomycosis has been reported more frequently in