RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • 반도체 캐패시터 유전막 증착원료(precursor) TEMAHf (Tetrakisethylmethylaminohafnium)의 진공에서의 열물성 및 박막특성평가

        안지혁,김하영,심섭,강고루,안종기,최은미,정낙관,김진태,윤주영 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.1

        본 연구에서는 반도체 HfO2 유전막의 증착원료로 사용되는 TEMAHf의 증기압을 static, boiling 방법을 이용한 증기압 측정 장치를 통해 측정하였다. 또한 안정성 평가를 위해 이를 VCR 진공 fitting에 담아 120~140°C에서 4주간 가열하여 가속 실험을 수행하였다. 가열 전후 TEMAHf의 증기압 및 TG 측정, 원자층증착(ALD)을 통해 제조한 박막의 특성평가를 통해 변화를 확인하였고 이를 비교하여 안정성을 평가하였다. 따라서 본 연구는 향후 반도체 증착원료의 공정 최적화 및 안정성 평가에 도움을 줄 수 있을 것이라 기대된다.

      • KCI등재

        플립칩 패키지 BGA의 전단강도 시험법 표준화

        안지혁,김광석,이영철,김용일,정승부,Ahn, Jee-Hyuk,Kim, Kwang-Seok,Lee, Young-Chul,Kim, Yong-Il,Jung, Seung-Boo 한국마이크로전자및패키징학회 2010 마이크로전자 및 패키징학회지 Vol.17 No.3

        We reported the methodology for the shear test which is one of the evaluation procedure for mechanical reliability of flip-chip package. The shear speed and the tip height are found to be two significant experimental parameters in the shear test. We investigated how these two parameters have an influence on the results, the shear strength and failure mode. In order to prove these experimental inconsistency, simulation using finite element analysis was also conducted to calculate the shear strength and to figure out the distribution of plastic energy inside of the solder ball. The shear strength decreased while the tip height increased or the shear speed decreased. A variation in shear strength due to inconsistent shear conditions made confusion on analyzing experimental results. As a result, it was strongly needed to standardize the shear test method. 본고에서는 마이크로 접합을 위한 솔더볼 또는 범프의 기계적 신뢰성 평가에 사용되는 전단시험의 표준화 규격에 대해 고찰해 보았다. 전단시험에서 중요한 실험 조건 중 하나인 전단속도는 low speed shear test와 high speed shear test로 구분 된다. 전단속도가 빨라질수록 솔더볼에 가해지는 충격이 커지기 때문에, 소성변형에 대한 저항성이 커지게 되고, 전단강도가 커지게 된다. 그리고 이 결과는 전산모사를 통하여 확인할 수 있다. 또 하나의 중요한 실험 조건으로 전단툴의 높이가 있다. 일반적으로 전단툴의 높이가 높을수록 전단강도 값은 낮아지게 되는데, 여러 국제 규격에서 제시한 솔더볼 높이의 25% 지점을 초과한 높이에서 전단시험을 진행했을 때에는 전단시험이 진행되는 접합 계면의 면적이 줄어들어 실험결과의 신뢰도가 떨어지게 된다. 이와 같이 전단속도와 툴의 높이 등의 실험조건들이 구체적으로 규격화 되어있지 않은 채 진행 되면, 실험 결과의 신뢰도가 떨어지고, 각 계에서 진행된 연구결과를 상호 비교하기가 어렵다. 따라서 효율성을 고려한 간접 시험법 개발 및 최신 패키징기술을 반영된 특성평가 시험법의 규격, 그리고 다양한 시험 표준화는 결국 마이크로 전자패키지의 고 신뢰성으로 나타날 것이라 생각된다.

      • KCI등재

        마그마 융기 시나리오 기반의 백두산 천지 화산 홍수 재해 모의

        안지혁,김상현,이길하 한국외국어대학교 국제지역연구센터 2014 국제지역연구 Vol.18 No.3

        The volcano is showing signs of waking from a century-long slumber recently. Volcanic floods,including breakouts from volcanic lakes, can affect communities beyond the areas immediatelyaffected by a volcanic eruption and cause significant hydrologic hazards because floods fromlake-filled calderas may be particularly large and high. Probable actions need to be taken tominimize economic and social damage. This study focuses on constructing a flood hazard map triggered by the magma effusion in theBaekdusan volcano. A physically-based uplift model as a form of the ordinary differential equationwas developed and numerically solved using the finite difference method and Newton-Raphsoniteration method to construct outflow hydrograph at the outlet. The outflow hydrograph serves as anupper boundary condition when hydrodynamic model, called FLO-2D runs to simulate channelrouting downstream to give the maximum water level in the Songwha river basin. SRTM3 was usedto represent the land elevation and the spatial resolution was 100m. Land surface characteristics ismelted in the model using MODIS satellite data. The magma effusion rate into the caldera lake is followed by examples at other volcanic activities, and the flow was considered as a debris flow. Thestudy will contribute to build a geohazard map for the decision-makers and practitioners. 최근 대규모 칼데라 호수를 갖고 있는 백두산 분화 징조가 재현되고 있다. 화산의 분화는단순히 화산분출뿐만 아니라 칼테라 호수에 저장된 물의 방류로 인하여 대규모의 재해를 유발할 수 있다. 따라서 백두의 분화 시 예상되는 화산성 홍수의 피해를 예측하여 화산 재해에대비하고 사회적 피해와 경제적 파급 효과에 대한 신속한 정보를 확보할 필요가 있다. 이 연구에서는 백두산의 화산활동에 의하여 내부에서 마그마가 융기하면서 천지에 저장된 물을 대체하여 천지 밖으로 물이 방류될 경우를 가정하여 침수피해 가능지역을 보고자 하였다. 우선마그마 융기로 방류되는 물의 양은 미분방정식을 풀어 시간의 함수로 이끌어내었다. 이를 상류부 경계조건으로 하여 2차원 평면 흐름 수치모형인 FLO-2D를 사용하여 송화강 유역으로흐르는 홍수피해 지역을 모의하였다. 지형자료는 USGS에서 제공하는 SRTM3 수치 표고 자료를 바탕으로 100m×100m의 격자(Grid)를 생성하였다. 지표면 특성은 인공위성 MODIS자료를 사용하여 유출곡선지수와 조도계수를 산정하였다. 홍수 시에 순수한 물이 아닌 토석류가발생할 것이기에 토석류(Debris flow)를 고려하였다. 이 연구의 결과는 천지에서 유발한 화산홍수의 잠재적 피해지역에 대한 피액해 추정의 기본자료로 이용됨으로써 정책결정자에게 기본 방향과 가이드라인을 제시할 것이다.

      • 고온의 진공상태에서 열화한 반도체 소재 TTIP(Tetraisopropyl orthotitanate) 전구체의 열물성 및 ALD를 사용한 박막의 특성평가

        안지혁,신재수,안종기,강고루,심섭,김하영,최은미,정낙관,김진태,윤주영 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.1

        본 연구에서는 대표적인 고유전체 박막 TiO2의 전구체 TTIP의 장시간 열안정성을 평가하기 위해 120~180°C의 조건에서 7일간 열화하여 증기압과 TGA 측정을 통해 열물성 변화를 확인하고자 한다. 또한, 원자층 증착법의 장비를 사용해 증착한 유전체 박막의 증착률 및 균일도, 형태 등의 박막특성 변화를 확인하고, 이를 비교하여 고유전체 박막 TiO2의 열화 전후의 특성을 평가하여, TTIP 열화에 의한 열물성 변화와 원자층 증착에서의 열화온도에 따른 조건최적화 및 소자 특성을 확인하고자 한다.

      • KCI등재
      • KCI등재

        니알브론즈의 기계적 특성에 미치는 알루미늄 및 지르코늄 함량의 영향

        안지혁 ( Jee Hyuk Ahn ),김동욱 ( Dong Wook Kim ),김민수 ( Min Soo Kim ),황종현 ( Jong-hyun Hwang ),한승전 ( Seung Zeon Han ) 대한금속재료학회(구 대한금속학회) 2017 대한금속·재료학회지 Vol.55 No.8

        To study the effect of Al and Zr contents on the microstructural changes and tensile properties of Ni-Al-Bronze alloy, seven specimens were cast with different Al and Zr contents. The microstructure observation revealed that all specimens were composed of β` and κ phases in a α matrix. With increasing Al and Zr contents, the tensile strength of the Ni-Al-Bronze increased, due to an increase in the β` and κ phase fraction and grain refinement, but the elongation behavior of the Ni-Al-Bronze declined. Furthermore, the excessive addition of Zr caused a reduction in tensile strength and ductility. A successful combination of tensile strength and ductility, 688 MPa-23% was achieved by the controlled addition of Zr to Ni-Al-Bronze. (Received November 10, 2016; Accepted March 13, 2017)

      • KCI등재

        우리나라 하천의 기온-수온의 상관관계 및 이력현상 분석: 미래 하천수온 변화 예측을 위한 사전검토

        안지혁 ( Ji Hyuck An ),이길하 ( Khil Ha Lee ) 한국환경정책평가연구원 2013 환경정책연구 Vol.12 No.2

        최근 인류가 초래한 지구의 온난화로 인하여 기온이 상승하고 이의 직접적인 반응으로 수온 증가가 감지되고 있다. 기온변화가 하천의 수질과 생태 환경에 미치는 영향을 추정하기 위해서는 수온 상승의 시기와 하천 어종에 대한 이해가 필요한데 이를 위하여 미래의 수온을 예측할 필요가 있다. 이에 하나의 사전연구로서 기온·수온 관계에 대하여 분석해 보았다. 2009년에서 2011년까지 3년 동안 환경부의 수질자동관측소에서 관측한 최소 873개에서 최대 1083개의 일 관측 자료를 바탕으로 자기상관관계와 교차상관관계를 조사해 본 결과 0.9 이상의 높은 상관관계를 보였다. 또 지체시간이 10일 미만에서는 기온의 자기 상관 계수가 수온의 가기 상관 계수보다 더 높은 것으로 나타났다. 관측자료의 이력현상을 분석하기 위하여 상승기와 하강기로 나누었는데, 관측지점에 따라서는 강한 이력현상을 보이는 지점도 발견되었다. 결국 기온·수온 관계를 구축함에 계절적인 이력현상이 고려되어야 정확도를 높일 수 있음을 유추할 수 있다. The potential impact of water temperature on air temperature in response to recent anthropogenic global warming has been noticed. To predict climate, induced change in river aquatic environment, it is necessary to understand the thermal constrains of fish species and the timing of the projected river temperature. As a preliminary study, air-water temperature relationship was analyzed on the basis of the observed data during the time period of 2009-2011 and the number of data corresponds to 873-1083. As a result of analyzing the auto-and cross-correlation coefficient between air-water temperature, high correlation is shown (~0.9). It is also found that the correlation coefficient of air temperature is higher than that of water temperature at the lag time less than approximately 10 days. Observed data was divided into two groups to investigate hysteresis: rising limb and falling limb. For some stations there is strong evidence that hysteresis exist between air-water temperature relationships. Consequently it is recommended that seasonal hysteresis needs to be included in determining an airwater relationship.

      • KCI등재후보

        센서 시스템을 위한 저전력 고신뢰의 비동기 디지털 회로 설계

        안지혁 ( Jihyuk Ahn ),김경기 ( Kyung Ki Kim ) 한국센서학회 2017 센서학회지 Vol.26 No.3

        The delay-insensitive Null Convention Logic (NCL) asynchronous design as one of innovative asynchronous logic design methodologies has many advantages of inherent robustness, power consumption, and easy design reuses. However, transistor-level structures of conventional NCL gate cells have weakness of high area overhead and high power consumption. This paper proposes a new NCL gate based on power gating structure. The proposed 4x4 NCL multiplier based on power gating structure is compared to the conventional NCL 4X4 multiplier and MTNCL(Multi-Threshold NCL) 4x4 multiplier in terms of speed, power consumption, energy and size using PTM 45 nm technology.

      • KCI등재

        사회인 야구팀 성원 간 커뮤니케이션 만족이 팀 응집력 및 팀 성과에 미치는 영향

        안지혁(JiHyukAhn),권민혁(MinHyukKwon) 한국체육학회 2013 한국체육학회지 Vol.52 No.2

        이 연구의 목적은 사회인 야구팀 성원 간 커뮤니케이션 만족과 팀 응집력 및 팀 성과의 관계를 규명하는데 있다. 이를 위하여 2012년 현재 서울과 경기지역에 있는 총 5개의 리그에서, 각 리그 당 10개 팀을 선정하여 총 50개 팀의 500명 선수들을 연구대상으로 선정하였다. 설문지를 이용하여 자료수집이 이루어졌으며, 수집된 자료를 근거로 다중회귀분석(Multiple Regression Analysis)을 이용한 경로분석(Path Analysis)을 수행하였다. 이 연구에서 얻어진 결론은 다음과 같다. 첫째, 사회인 야구팀의 성원 간 커뮤니케이션 만족은 팀 응집력에 부분적으로 영향을 미친다. 둘째, 사회인 야구팀의 성원 간 커뮤니케이션 만족은 팀 성과에 부분적으로 영향을 미친다. 셋째, 사회인 야구팀의 팀 응집력은 팀 성과에 부분적으로 영향을 미친다. 넷째, 사회인 야구팀 성원 간 환경적 커뮤니케이션 만족, 팀 응집력 그리고 팀 성과 간의 관계는 서로 인과적 관계가 있다. 따라서 팀 응집력이 환경적 커뮤니케이션 만족과 팀 성과의 관계를 강화시켜주는 중요한 매개변수이다. The purpose of this study is to identify the relationship between team cohesion, team performance and the communication satisfaction of community baseball club members. For this, five hundred players were recruited from five active leagues in Seoul and Gyeonggi. Participants were collected from ten teams per league, a total of fifty teams, through convenience sampling and five hundred subjects were extracted to analyze. The path analysis based on multiple regression analysis was used. The results showed as follows; First, it is found that communication satisfaction among team players has an influence on team cohesion. Secondly, team performance was shown as significantly influenced by communication satisfaction among community baseball club members. Third, team cohesion of community baseball club members represents an influence on team performance. Lastly, the research showed that there is the causal relationship between environmental communication satisfaction baseball club members and team cohesion as well as team performance. Therefore, it is found that team cohesion is an important parameter which enhances the relation between environmental communication satisfaction and team performance.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼