http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
편광법을 이용한 LCD 편광판과 보상판의 광축 정렬오차 측정
안성혁,김상준,김상열,An Sung Hyuck,Kim Sang Jun,Kim Sang Youl 한국광학회 2004 한국광학회지 Vol.15 No.6
회전검광자방식 편광분석방법을 이용하여 LCD (liquid crystal display) 편광판에 부착되어 있는 보상판의 느린축이 편광판의 투과축 대비 틀어진 각도를 0.1도 이내로 정밀하게 측정할 수 있는 방법을 제안하였다. 본 방법을 이용하면 보상판을 LCD 편광판과 접합하는 공정에서 발생하는 광축정렬의 오차를 줄일 수 있고 궁극적으로 LCD의 화질을 일정하게 유지, 관리하는데 기여할 수 있을 것으로 기대된다. Using a polarimetry based on the rotating analyzer ellipsometer, a technique of measuring off-alignment angle between the slow-axis of the LCD (Liquid Crystal Display) polarizing plate and the transmission axis of the compensating plate attached to the polarizing plate is proposed. It is anticipated that this technique will reduce the optic axis off-alignment error coming from the process of attaching the compensating plate to the LCD polarizing plate markedly, and therefore will help maintain the quality of LCD display image uniformly.
국소장이 원자계에 미치는 영향에 대한 이론 II: 이준위 원자계에서의 거시 양자 Langevin 방정식의 유도
안성혁 한국광학회 2003 한국광학회지 Vol.14 No.1
쌍극자들로 이루어진 이준위계의 해밀토니안이 주어질 때 이 계가 만족시키는 미시적인 양자 Langevin방정식을 유도하고, 이 방정식을 거시적인 구간 내에서 평균 함으로써 거시 양자 Langevin방정식을 유도하고 국소장 효과가 양자적으로 어떻게 표현되는 지를 살펴본다. The microscopic quantum Langevin equations for two-level atom electric dipole systems are derived. starting from the microscopic interaction Hamiltonian of the systems. By averaging those microscopic equations over a macroscopic region, the macroscopic quantum Langevin equations are derived and the effect of local-field corrections on the two-level systems is investigated.
국소장이 원자계에 미치는 영향에 대한 이론 I : 전기 쌍극자계에서의 상호작용 해밀토니안의 유도
안성혁 한국광학회 2000 한국광학회지 Vol.11 No.1
전기 쌍극자들로 이루어진 물질계의 총 해밀토니안을 쿨롱게이지내에서 정의하고, 유니타리 변환을 이용하여 쌍극자 근사를 가정할 때 각 쌍극자들에 의한 편극이 궁극적으로 계의 상호작용 해밀토니안에 어떻게 영향을 미치는가를 살펴본다. We define the basic minimal coupling Hamiltonian of the atomic systems in the Coulomb guage and show that this Hamiltonian yields the correct equations of motion for the operators of interest. Using the unitary transformation and making the dipole approximation, we calculate the effect of polarization of the dipoles on the interaction Hamiltonian of the system. ystem.
레일 마모도의 측정 정밀도 향상을 위한 3차원 레일 프로파일 재구성 기법 개발
안성혁(Sung-Hyuk Ahn),김만철(Man-Cheol Kim) 한국철도학회 2010 한국철도학회 학술발표대회논문집 Vol.2010 No.7
2차원 카메라와 라인 레이저를 이용한 비접촉식 레일 마모도 측정 시스템은 레일의 정확한 마모도 측정을 위하여 레일에 조사된 레이저 영역을 왜곡 없이 획득하고 이를 레일 단면과 정확하게 일치시켜야 한다. 그러나 일반적인 비접촉식 레일 마모도 측정 시스템의 카메라는 레일의 측면에서 비스듬하게 레일을 촬영하여 사선방향(Oblique Viewpoint)의 원시영상을 획득하는 방식을 취하기 때문에 카메라 모델 (Camera Model)과 투시 변환(Perspective Transform)을 이용하여 카메라로부터 획득한 원시영상이나 영상으로부터 추출된 레이저 영역의 좌표 데이터를 레일의 단면과 일치시키기 위한 영상 후처리 작업을 수행하게 된다. 이때 라인 레이저가 조사된 지점에서 획득한 레일 프로파일 데이터는 전체 측정 구간에 대하여 일정한 간격으로 측정된 불연속 데이터의 특성을 가지므로 측정된 각 레일 프로파일 데이터 사이의 영역에서는 정확한 레일의 마모도를 측정할 수 없는 한계를 가진다. 본 논문에서는 레일의 양방향에서 획득한 영상에 대하여 3차원 레일 프로파일 생성을 위한 변형된 카메라 모델과 투시 변환을 적용함으로서 레일 마모도의 측정 정밀도를 향상하기 위한 3차원 레일 프로파일 재구성 기법을 제안하고자 한다. 제안된 3차원 레일 프로파일 재구성 기법을 통하여 전체 측정 구간내에 포함된 레일 마모도 측정 데이터의 불연속성을 효과적으로 제거하여 연속적인 측정면(Measurement Surface)을 생성함으로서 측정하고자 하는 전체 레일에 대한 향상된 측정 정밀도를 제공하고자 한다. The The contactless railway abrasion measurement system have to satisfy two conditions to increase the measurement accuracy as follows. The laser region projected on the rail have to be extracted without the geometrical distortion. The mapping of the acquired laser region data on the rail profile have to be matched with the cross section of rail, exactly. But, the conventional railway abrasion measurement system is required the post image processing with a camera model and a perspective transform for the exact mapping between the cross section of rail and the coordinate data extracted from a line laser region or the raw image obtained from a camera because the image captured from the camera has an oblique viewpoint. So, the measured rail profile data had limits to the measurement accuracy because of a discontinuity point. In this Paper, we propose the 3D rail profile reconstruction method to increase the accuracy of the railway abrasion measurement system applying the modified camera model and perspective transform to the image obtained from the bidirectional rail.
Self - Organized Dynamics of Photoinduced Phase Grating formation in Optical Fibers
안성혁(Sunghyuck An) 한국광학회 1993 한국광학회지 Vol.4 No.4
본 논문에서는 광섬유에 아르곤 레이저 빔이 입사될 때 생기는 위상격자 형성에 관한 역학을 다룬다. 간단한 쌍광자 표백모델(two-photon bleaching model)을 이용하여 위상격자가 시간이 지남에 따라 이상적인(ideal) 격자로 자기조직됨(self-organized)을 보인다. 광섬유의 각점에서의 시간에 따른 상태전개는 하나의 보면 매개변수(universial parameter)에 의해 나타내어지고 또한 이 광섬유계를 기술하는 연립편미분 방정식이 이 매개변수에 의해 연립 상 미분 방정식으로 간소화 된다. 이 연립 상 미분 방정식을 이용하여 위상격자가 자라나는 상태는 한 고정점(a fixed point)를 향해 가는 과정이고 이 고정점은 완벽히 위상맞춤(phase-matched)된 격자에 해당된다는 것을 보인다. The dynamics of phase grating formation with visible light in an optical fiber is investigated. Adopting a simple two-photon local bleaching model. it is shown that the grating self-organize into an ideal grating, where the writing frequency is always in the center of the local band gap, as it evolves. The evolution at each point in the fiber is described in terms of a universal parameter that reduces the coupled partial differential equations describing the system to ordinary differential equations. These equations are used to prove that there exists a fixed point of the grating growth process that corresponds to a perfectly phase-mached grating.
물체 감지센서와 폰트 라이브러리를 이용한 지능형 레이저 마킹 시스템에 관한 연구
안성혁(Sunghyuk Ahn),강동은(Dongeun Kang),오세훈(Sehoon Lee),박세희(Sehee Park),이윤(Yun Yi) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
The laser marking system is the representative factory automation system that records the manufacturer's information on the case of products. According to the strengthen of the law of PL(Product Liability), the needs for laser marking system are increased more and more. But, the conventional laser marking system has some critical drawbacks in terms of the operation such as the compatibility with the used production line and the difficulty of adopting the various language and font. In this study, we are proposed the method that adopts various language and font without changing of used production line using the object detection sensor and font library. we expect that Suggested method will be contributed in increase adoptability and productivity of the laser marking system.