http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
$xBa(Zn_{1/3}Nb_{2/3})O_3-(1-x)Sr(Zn_{1/3}Nb_{2/3})O_3$ 고용체의 온도 변화에 따른 유전 특성
심화섭,이한영,김근영,안철,Shim, Hwa-Sup,Lee, Han-Yeong,Kim, Geun-Young,An Chul 대한전자공학회 1990 전자공학회논문지 Vol. No.
본 논문에서는 고주파 대역에서의 $xBa(Zn_{1/3}Nb_{2/3})O_{3}\[BZN]-(1-x)\Sr(Zn_{1/3}Nb{2/3)O_{3}\[SZN]$고 용체의 온도 및 mol 비에 따른 유전 특성에 관하여 연구하였다. BZN은 10GHz에서 유전 상수 및 무부하 Q값이 $40.5{\pm}0.5,5980{\pm}100$이며, SZN은 10.2GHz에서 각각 $36.9{\pm}0.5,2700{\pm}100$을 보였다. 또한 공진 주파수의 온도 계수는 각각 $+27.5ppm/{\circ}C$와 $-39.1ppm/{\circ}C$을 나타냈다. x-BZN-(1-x)SZN 고용체에서 온도변화에 가장 안정한 특성을 보인 고용체는 0.3BZN-0.7SZN 고용체이다. 이 고용체의 유전 상수, 무부하 Q값 및 공진 주파수의 온도 계수는 9.8 GHz에서 각각 $41.5{\pm}0.2,2920{\pm}100$ 및 $-3.5ppm/{\circ}C$를 보였다. The temperature and the composition dependence of the dielectric properties of the solid solution materials in the system $xBa(Zn_{1/3}Nb_{2/3})O_{3}\[BZN]-(1-x)\Sr(Zn_{1/3}Nb{2/3)O_{3}\[SZN]$ at microwave frequency was studied. The dielectric constant and unloaded Q were $40.5{\pm}0.5,5980{\pm}100$ respectively for BZN at 10 GHz and $36.9{\pm}0.5,2700{\pm}100$ for SZN at 10.2GHz. The temperature coefficient of the resonant frequency was $+27.5ppm/{\circ}C$ for BZN and $-39.1ppm/{\circ}C$ for SZN. The results also showed that 0.3 BZN-0.7 SZN is the most temperature-stable composition among xBZN-(1-x) SZN solid solutions. In this case, the dielectric constant, the unloaded Q and $\tau_{f}$ at 9.8GHz were $41.5{\pm}0.2,2920{\pm}100$ and $-3.5ppm/{\circ}C$, respectively.
심화섭,박인준,이수복,정종국,김희철,이형달,김경재 한국공업화학회 2001 한국공업화학회 연구논문 초록집 Vol.2001 No.-
불소계 우레탄은 발수발유성, 방오성, 내용매성 등 불소화합물이 보유하는 우수한 표면특성 뿐만 아니라, 우수한 질감, 유연성, 내마찰성 및 기재에 대한 밀착성 등 우레탄의 장점을 동시에 보유하는 고기능성 표면코팅제로서 다양한 산업분야에서 사용량이 급격히 증가하고 있다. 본 연구에서는 섬유 및 피혁표면 처리제로서 발수발유성과 동시에 방오성을 부여할 수 있으며, 연속상이 물로 구성되어 사용시 환경오염이 없는 수분산형 불소계 방오가공 우레탄을 개발하였다. 본 연구에서 제조한 수분산성 불소계 방오 가공제는 과불소기를 함유하며 우레탄 구조를 보인다. 형성된 우레탄 화합물은 5~15dyn/cm의 극히 낮은 표면에너지를 갖으며, 우수한 발수성, 발유성 및 방오성을 보인다. 합성방법, FT-IR, GC/MS, NMR, DSC등의 분석결과를 보이고, 얻어진 수분산형 불소계 방오가공 우레탄의 발수발유성, 방오성, 안정성등 성능시험 결과와 구조 및 분석 결과와의 상호 연계성을 서술하였다.
고주파 대역에서 Dielectric Rod Resonator 방법에 의한 저유전 손실 물질의 유전 특성 측정
김근영,심화섭,안철,장익수,Kim, Geun-Young,Shim, Hwa-Sup,An, Chul,Chang, Ik-Soo 대한전자공학회 1990 전자공학회논문지 Vol. No.
Dielectric rod resonator 방법을 이용하여 고주파 대역에서 낮은 유전 손실을 갖는 유전체의 유전 특성을 측정하는 이론과 실험결과를 보였다. 유전체 시편과 금속 도체판 사이에 존재하는 공기층 효과를 최소화하기 위해 $TE_{011}$ mode 공진 주파수를 이용하였다. 컴퓨터를 사용하여 공진 주파수와 시편 크기, 2-dB 대여폭으로부터 유전 특징을 계산하였다. 측정의 오차 범위는 유전 상수인 경우 ${\pm}3{\%}$ 유전 손실인 경우 ${\pm}12{\%}$ 이내였다. Theory and experimental results of measuring the microwave dielectric characteristics of low-loss materials by using dielectric rod resonator method are presented. The $TE_{011}$ mode resonance frequency was adapted to minimize the effect of the air gap between the rod and the conducting plates. The dielectric properties were computed from the resonance frequency, sample geometry and 3 dB bandwidth. The error of measurements was within ${\pm}3{\%}$ for dielectric constant and was within ${\pm}12{\%}$ for dielectric loss.
열가스유동해석 및 간이합성시험을 통한 SLF시험의 성능예측
김천일,정호중,심화섭,서왕벽,송기동,정진교,김홍규 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.4
Self blast type circuit breakers performs interruption using gas pressure increased by arc in heating volume. Especially, this pressure rise in heating volume is very important on breaking capability of self blast type circuit breakers. So, Many circuit breaker developers make a effort to predict pressure rise in heating volume. In this paper, we describe measuring pressure rise using simplified synthetic testing facility and calculating pressure rise using gas flow simulation program.