http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송명준,박영호,유석준,심동현,Song, Myung-Jun,Park, Yung-Ho,Yoo, Seok-Jun,Sim, Dong-Hyun (사)한국토질및기초기술사회 2006 기술발표회 Vol.2006 No.-
The project comprised the construction of the new oil pier and associated topside facilities and demolition of exiting south pier. The site is located approximately 33km south of Kuwait city at MAA refinery. The approach trestle and berth structures of the new oil pier were designed to be supported by steel tubular piles Total 2,480 numbers of piles(795 piles at Approach Trestle, 1187 piles at Berth 1 -4 and 498 piles at Berth 5-6) had to be driven through the calcareous silty sand In this study, the design procedures for offshore steel pipe piles, evaluation for the compression and tension capacities by static and dynamic load test and effective driving criteria by the final set values are discussed
추력편향 노즐의 정량적 성능특성 관찰을 위한 시험장치 설계
송명준(Myung-Jun Song),윤상훈(Sang-Hun Yoon),조용호(Yong-Ho Cho),이열(Yeol Lee) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
노즐 출구에서 유출되는 이차제트의 코안다 효과를 이용하는 유체역학적 추력편향제어 방법은 초음속 제트의 효율적인 추력편향을 위한 새로운 방법이다. 그동안 진행된 유동가시화 결과에서 관련 기술의 장단점이 관찰된 바 있으나 그 결과가 정성적인 한계가 있었다. 따라서 이차제트의 코안다 효과를 이용한 추력편향제어의 성능특성에 관한 정량적 관찰 연구가 진행되었으며, 이를 통한 시험장치 설계, 보정 및 자료획득 연구결과가 제시되었다. The fluidic thrust vector control using co-flowing coanda effect of secondary jet at the nozzle exit is a new concept for efficient thrust vectoring of supersonic jet exhausts. Flow visualization of the flow fields in previous studies have shown some pros and cons of the technique, however, most of the observations were somewhat limited as qualitative data. The present study was designed to evaluate the quantitative performance-characteristics of the thrust-vectoring technique utilizing coanda effects of the secondary jet. Details of design of the test device and calibration/data reduction procedure are provided.
정상범위의 간기능검사치를 갖는 만성 B 형간염 보유자에서 간조직검사와 혈청 4 형 콜라겐치의 비교
송명준(Myung Jun Song),김경곤(Kyoung Gon Kim),신요식(Yo Sig Shin),황남철(Nam Cheol Hwang),박상준(Sang Joon Park),김윤권(Yun Kwon Kim),김소연(So Yon Kim),김영중(Young Jung Kim),조민구(Min Koo Cho),이권전(Gwon Jun Lee) 대한내과학회 2002 대한내과학회지 Vol.63 No.1
목적 : 정상범위의 간기능검사치를 갖는 만성 B형간염 보유자에서 조직학적인 판단을 할 때 경피적인 간생검이 주로 사용되고 있다. 그러나 간생검은 침습적이며 검체 채취상의 오차 및 환자의 거부감에 따른 반복시행의 어려움이 있다. 최근 간 섬유화의 정도와 혈청 Ⅳ형 콜라겐치의 연관성이 있음이 알려짐에 따라 저자들은 간생검의 결과와 혈청 Ⅳ형 콜라겐치의 관계를 연구함으로써 조직소견을 예측하고 감별함에 있어 임상적으로 유용한지 알아보고자 하였다. 대상 및 방법: 임상적인 증상이 없는 정상범위의 간기능검사치를 갖는 만성 B형간염 보유자 31명의 전투경찰을 대상으로 간생검을 시행하여 병리조직학적 소견에 따라 3개의 군으로 분류하였고 각각은 병리학회에서 제안한 기준에 의거하였다. 간생검 당일 아침에 혈액을 채취한 후 Ⅳ형 콜라겐치 (정상치:5 ng/mL 이하)를 측정하여 조직소견과의 관계를 분석하였다. 결과: 총 31예의 대상환자 중 조직소견이 정상인 A군 13명 (41.9%), 섬유화는 없으면서 조직학적 이상이 있는 B군 11명 (35.5%), 섬유화가 있는 C군 7명 (22.6%)이었다. 혈청 Ⅳ형 콜라겐치는 A군에서 3.53±0.57 ng/mL, B군에서 3.56±1.17 ng/mL, C군에서 3.99±0.88 ng/mL이었고, 각 군간에 수치의 상승이 있었으나 유의하게 높지는 않았다 (p>0.05). 조직학적 이상이 보인 경우는 18명 (Group B and C)으로 평균 collagen수치는 3.73±1.06 ng/mL이었고, 섬유화가 없는 경우는 24명 (Group A and B)으로 평균 collagen수치는 3.55±0.88 ng/mL이었고, 각각 A군과 C군과 비교하여 유의성이 없었다 (p>0.05). 결론: 정상범위의 간기능검사치를 갖는 만성 B형간염 보유자의 경우 조직학적 변화를 알고자 할 때 조직학적인 변화에 따라 Ⅳ형 콜라겐치의 상승은 있으나 유의성이 없어 조직소견을 대변할 수는 없으며 간생검이 가장 유용한 검사라고 생각된다. Background: We compared the results of liver biopsy and the levels of serum type Ⅳ collagen of the hepatitis B carriers with normal liver function test (LFT) to evaluate the clinical usefulness of serum type Ⅳ collagen in predicting the progression of histopathological findings. Methods: Thirty one chronic hepatitis B carriers with normal LFT and no significant clinical symptoms, who were Korean combat police, were classified into three groups according to their histologic results of the liver biopsies. The classification followed the standard proposed by Korean Society of Pathology. Blood samplings for serum type Ⅳcollagen (reference : less than 5 ng/mL) were done in the morning of the same day of the liver biopsy. Results: Of thirty one patients, thirteen patients showed normal histologic findings (41.9%, Group A), eleven patients revealed histologic abnormalities without fibrosis (35.5%, Group B) and seven patients were with fibrosis on liver biopsy (22.6%, Group C). Serum type Ⅳ collagen levels of Group A, B and C were 3.53±0.57 ng/mL, 3.56±1.17 ng/mL and 3.97±0.88 ng/mL, respectively. The average of serum type Ⅳ collagen levels of Group C was higher than of Group B and the average of Group B higher than that of Group A without any statistical significance (p>0.05). The averages of serum type Ⅳ collagen of eighteen patients with histologic abnormalities (Group B and C) and twenty four patients without fibrosis (Group A and B) were 3.73±1.06 ng/mL and 3.55±0.88 ng/mL respectively. Upon comparison of these averages with the those of Group A and C, no statistical significance was established (p>0.05). Conclusion: In chronic hepatitis B carriers with normal LFT findings, levels of serum type Ⅳ collagen were elevated along with histologic severities without statistical significance, therefore can not represent the changing degree of the histologic findings. Liver biopsy is considered to be one of the most accurate tool to assess the histologic status of the liver.(Korean J Med 63:29-35, 2002)
송명준(Myung-Jun Song),이재준(Jae-Joon Lee),고병식(Byeong-Sik Ko),신문균(Moon-Kyun Shin) 한국자동차공학회 2006 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
The study of optimization is one of the most important element to develop and research the new cars. A seat of those provide comfort to passengers. At the current Engineers' concerns is to reduce the cost and weight of new car. In the paper, we have done optimization analysis of the car seat on the base of SEAT BELT ANCHOR and RR SLED considering the safety of passengers. The procedure of optimization is built in base of those. It is to build the efficiency of optimization. the following software is utilized, LS-Dyna, GENESIS, Optistruct of Altair, Visual DOC and Hypermesh. Design of experiment is utilized to obtain optimization design for driver seat. here. The reason of using DOE is that the analysis of the previous is nonlinear. Topology support the liner only for FEA. In the paper we call the initial finite element model to baseline model. And the orthogonal array of DOE is used.