http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LNG / LNG-FPSO 선박용 안전밸브의 유동특성 및 유출계수에 관한 연구
김성진(Sung Jin Kim),정성윤(Sung Yuen Jung),김당주(Dang Ju Kim),김철(Chul Kim) 대한기계학회 2011 大韓機械學會論文集A Vol.35 No.5
LNG / LNG-FPSO 선박에 사용되는 안전밸브는 배관 시스템으로부터 유체를 방출하여 시스템의 압력을 일정하게 유지시키는데 중요한 역할을 한다. 이러한 안전밸브의 기능적 특성으로 인해 유출계수는 밸브의 성능 중 가장 큰 비중을 차지하며, 선급의 인정을 받기 위해서는 0.8 이상의 유출계수가 요구되고 있다. 밸브성능을 향상시키기 위해서 밸브 내부에서 발생하는 유동특성에 대한 정확한 이해가 필요함에도 불구하고 대부분의 밸브 설계의 경우 현장 작업자들의 경험과 실험에 의한 시행착오에 의존하고 있다. 본 논문에서는 안전밸브에 대한 유동해석을 통해 밸브 내부에 발생하는 압축성 유동현상을 고찰하였고, 실험과 해석에 의한 유출계수를 비교하여 유동해석의 타당성을 검증하였으며, 안전밸브를 지나는 공기의 질량유량을 예측하기 위한 유동해석 모델을 확립하였다. The safety valve used in LNG/LNG-FPSO ships plays an important role in maintaining a fixed level of pressure by emitting LNG gas out of the pipes in the LNG piping system. The discharge coefficient is regarded as the most important factor in the valve performance. To satisfy the ship’s classification, the discharge coefficient of the safety valve must usually be over 0.8. Despite the importance of understanding the flow phenomena inside the safety valve, the valve design is usually based on experience and experiments. We carried out a computational fluid dynamics (CFD) investigation using the ANSYS-CFX software. We observed the flow phenomena inside the valve and measured the discharge coefficients according to changes in the valve lift, which is the distance between the exit of the nozzle and the lower part of the disc plate. We verified our CFD results for the discharge coefficients using available experimental data.
CNG 저장용기의 두부 성형을 위한 열간스피닝 공정에 관한 연구
이현우(Hyun Woo Lee),정성윤(Sung Yuen Jung),김철(Chul Kim) 대한기계학회 2013 大韓機械學會論文集A Vol.37 No.4
천연가스 자동차에 장착되는 연료저장용기는 크게 두부, 실린더부 그리고 바닥부로 나뉜다. 실린 더부와 바닥부에 관한 연구는 이미 충분히 수행되었으나, 두부 성형에 관한 연구 및 설계자료는 전무한 실정이며, 현재 현장 작업자들의 경험이나 시행착오에 의해 제작되고 있다. 본 연구에서는 천연가스 저장용기의 두부 성형 공정인 열간스피닝 공정 분석을 위하여 회전체 소성가공에 적합한 ALE method 를 적용하여 유한요소해석을 수행하였다. 성형인자들(이송거리, 성형시간, 소재의 온도, 회전속도)이 성형롤러의 하중 및 두부의 좌굴에 미치는 영향을 분석하고, 이를 토대로 저장용기의 두부성형 가능성을 검토하였다. 또한 성형해석 결과로 제조된 저장용기 두부의 안전성을 평가하기 위하여 파열압력에 대한 용기의 구조해석 및 실험을 수행하였다. The fuel storage vessel installed in CNG vehicles can be largely divided into 3 parts: head, cylinder, and dome. Studies of the cylinder and dome parts have already been performed, but sufficient design data is not available about the head part. Therefore, expert field engineers heavily depend upon trial-and-error methods. Therefore, FE analysis is performed to review the hot spinning process for forming the head part of the CNG vessel using the Arbitrary Lagrangian-Eulerian (ALE) method. The effects of forming factors on the load were analyzed. The values of the factors were chosen to avoid defects in the head part and buckling, and the forming feasibility of the head part was investigated. Furthermore, a bursting test was performed to evaluate the safety of the storage vessel.