http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
석지후,김성희,조성민,이기라,이준영 한국고분자학회 2018 Macromolecular Research Vol.26 No.13
Crosslinked organosilicon-acrylate copolymer thin film with desired chemical composition was successfully fabricated by a simply modified initiated chemical vapor deposition (iCVD) process. Unlike the conventional iCVD copolymerization process, in our novel process, comonomers were injected together as one gas phase into the polymerization chamber from miscible liquid comonomer mixture. 2,4,6,8- tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (V4D4) and cyclohexyl methacrylate (CHMA) were used as the comonomers and tert-butyl peroxide was used as the initiator. From Fourier transform infrared (FTIR) spectra and solvent resistance test, we clearly confirmed that the crosslinked copolymer thin film with desired chemical composition could be obtained by controlling only the mixing ratio of liquid comonomers. It is expected that crosslinkable V4D4 organosilicon moiety provides hydrophobic moisture barrier property and CHMA acrylate moiety provides mechanical flexibility and better adhesion. We observed a certain level of moisture blocking capability of the copolymer thin film, implying potential application of the crosslinked organosilicon-acrylate copolymer thin film as flexible polymer buffer layer in organic/inorganic or metal oxide hybrid moisture barrier for flexible display or electronic devices.
김상우,석지후,김병현,조희민,조국영,Kim, Sang Woo,Seok, Ji-Hoo,Kim, Byung-Hyun Daniel,Cho, Hee-Min,Cho, Kuk Young 한국전기화학회 2014 한국전기화학회지 Vol.17 No.1
리튬이차전지의 고에너지 밀도화를 위해 전지 구성요소들의 무게 및 부피를 저감하려는 요구가 증가하고 있다. 분리막은 리튬이온의 이동통로를 제공할 뿐만 아니라 양극과 음극의 직접적인 접촉을 방지하는 핵심 부품이다. 본 연구에서는 연신 비율을 달리하여 습식방법을 통해 두께가 16, 12, $9{\mu}m$ 인 폴리에틸렌 분리막을 준비하였고, 각각의 기계적 강도 및 열적특성을 평가하였다. 또한 양극($LiCoO_2$), 음극(Graphite)을 사용한 Coin type full-cell을 제작하여 율속 특성 및 500cycle까지 사이클 수명특성을 평가하였다. 수명특성 평가를 통해 사용된 모든 두께의 분리막에서 500cycle 까지 큰 차이 없이 80% 정도의 용량유지 결과를 확인하였다. 율속 특성에서는 가장 얇은 $9{\mu}m$ 분리막이 가장 우수한 성능을 나타내었다. 흥미롭게도 $9{\mu}m$의 분리막이 $16{\mu}m$ 경우보다 열 수축률 평가에서 우수한 특성을 나타내었다. There is increasing demand on the reducing the weight and the volume of the major components in lithium secondary battery to improve energy density. Separator not only provides pathway for lithium ion movement but also prevents direct contact between anode and cathode. Herein we fabricated polyethylene separator by varying biaxial stretching ratio to obtain membrane thickness of 16, 12, and $9{\mu}m$. Mechanical and thermal properties of the separator with different thickness were investigated. Also rate capability and charge-discharge cycle property up to 500 cycles were studied using coin type full-cell with $LiCoO_2$ and graphite as a cathode and an anode, respectively. All the cells using separator with different thickness demonstrated excellent capacity retention after 500cycles (around 80%). Considering the rate capability, cell using separator with thickness of $9{\mu}m$ showed best performance. Interestingly, separator thickness of $9{\mu}m$ was more resistant to heat contraction compared to that of $16{\mu}m$ separator.
왕평안 ( Pingan Wang ),한웅철 ( Xiongzhe Han ),손영선 ( Youngsun Son ),석지후 ( Jihoo Seok ),모창연 ( Changyeon Mo ),김동원 ( Dongwon Kim ),김준호 ( Joonho Kim ),정원기 ( Wonki Chung ) 한국농업기계학회 2021 한국농업기계학회 학술발표논문집 Vol.26 No.1
현재 국내 양봉업자들은 양봉의 운반, 관리 등을 대부분 수작업으로 진행하고 있으며, 양봉업 종사자의 연령대가 대부분 고령이기 때문에 노동시간을 줄이고, 벌들을 효율적으로 관리하기 위해 양봉 사양 관리용 이동 보조 장치 개발이 필요하다. 본 연구에서는 벌통의 식별, 운반, 운송 등 기능을 갖춘 전기 충전 기반의 벌통 운송용 이동 장비를 구현한다. 실험 초기 단계에서는 춘천시 주변 다수 양봉장에 방문하여 양봉장의 환경구조와 현재 사용 중인 이동 양봉장치에 대해서 구체적인 수요를 조사하였다. 다양한 양봉장의 규모 크기를 고려하여 최종적으로 소형 전동무한궤도운반차(LNS-T500)를 본 연구의 양봉 사양 관리용 이동 플랫폼으로 선정하였다. 기존의 단층 적재함 구조에서 다층구조로 설계하여 전개할 수 있는 소비 및 벌통 전용 적재함을 개발하였다. 시뮬레이션 정응력 분석을 통해 견고성과 변형성에 대해서 테스트하여 다종 운영환경에서 동작이 원활하게 이루어지는 것을 확보하였다. 개발한 적재함은 소비 운송 효율을 높일 뿐만 아니라 이동 양봉작업 시 적재함을 전개하여 벌통 운반하는데 유용하게 사용된다.