http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
An Efficient Transmission Scheme of MPEG2-TS over RTP for a Hybrid DMB System
서형윤,배병준,김종덕 한국전자통신연구원 2013 ETRI Journal Vol.35 No.4
Hybrid digital multimedia broadcasting (DMB) is a next-generation mobile TV system that combines broadcasting and wireless communication networks and can provide various high-quality multimedia services. However, if a system adheres to the current standard of transmitting the DMB content in the form of MPEG2-TS through wireless networks, it results in a burden on the network due to low transmission efficiency. The reasons for the low transmission efficiency are as follows. First, due to its constant bitrate characteristic, DMB MPEG2-TS includes a considerable amount of needless information, such as NULL packets and stuffing bytes. Second, due to the inflexibility of the Real-time Transport Protocol (RTP) standard, one cannot fully utilize the maximum transmission unit of the network when converting MPEG2-TS to RTP stream for transmission. This paper proposes a new transmission scheme that resolves these problems. Experiment results show that the proposed scheme improves data bitrate transmission efficiency by 8% to 36%, compared to the standard scheme, in the streaming of various real-DMB contents.
In-band Network Telemetry에서 전송 오버헤드 감소를 위한 이벤트 기반 모니터링 기법
서형윤 한국정보통신학회 2023 한국정보통신학회논문지 Vol.27 No.11
In-band Network Telemetry(INT)는 네트워크 상태를 수집, 보고하는 프레임워크이며, P4와 같은 SDN 데이터평면에서 활용이 가능하다. INT는 네트워크 스위치에서 네트워크 모니터링을 위한 정보를 패킷 헤더에 추가하여 전송한다. 이러한 구조는 전송 홉과 패킷이 늘어날수록 모니터링 데이터 전송 오버헤드가 발생하는 문제가 있다. 이러한문제를 해결하기 위해 본 논문에서는 전송 스트림의 시작, 변경, 종료 등의 이벤트 기반으로 전송 오버헤드를 감소하는 알고리즘을 제안한다. 또한 제안하는 알고리즘은 데이터 경로가 변경되더라도 본래 INT에서 제공하는 데이터 전송 경로도 추적이 가능하다. 시뮬레이션을 통해 모니터링 전송 오버헤드가 감소하는 것을 확인할 수 있으며, 제안하는 알고리즘에 따라 데이터 전송 경로도 추적이 가능함을 보인다. In-band Network Telemetry (INT) is a framework that collects and reports network status and can be used in SDNdataplanes such as P4. On the INT, a network switch adds monitoring information for network monitoring in the packetheader and transmits it. This behavior has a problem in that monitoring data transmission overhead occurs as thenumber of transmission hops and packets increases. To solve this problem, in this paper proposes an algorithm thatreduces transmission overhead based on the start, change, end etc. events of a transport flow. In addition, the proposedalgorithm can trace the data transmission path originally provided by INT even if the path changes of the flows. In thesimulation, it can be confirmed that the monitoring transmission overhead is reduced, and it is possible to trace the datatransmission path according to the proposed algorithm.
이기종 IoT 장치간의 데이터 전송 속도 차이로 인한 데이터 손실 방지 기법
서형윤,박정규,Seo, Hyungyoon,Park, Jung Kyu 한국정보통신학회 2019 한국정보통신학회논문지 Vol.23 No.7
IoT 장치들은 네트워크 구성에 많이 사용되고 있고, 증가하고 있다. 데이터는 필요에 따라서 이기종의 IoT 장치를 통하여 전송된다. 본 논문에서는 Bluetooth 5를 이용하여 내부 네트워크를 구성하고, LoRa(Long Range)를 통하여 데이터 전송할 때 발생하는 전송 데이터 손실을 방지하기 위한 기법을 제안한다. Bluetooth 5가 LoRa의 데이터 전송 속도에 비해 빠르므로 LoRa를 통하여 데이터를 전송할 때 데이터 손실 문제가 발생한다. 본 논문에서 제안하는 전송 데이터 손실 방지 기법은 Bluetooth 5와 LoRa 뿐 아니라 이기종의 IoT 장치의 데이터 전송 속도 차이로 인해 발생하는 데이터 손실을 방지할 수 있을 것으로 기대한다. 또한 본 논문에서는 제안하는 데이터 손실 방지 기법을 적용하여 시뮬레이션 결과를 보인다. 2가지 방법으로 시뮬레이션 했을 때 전송 성능과 저장에 필요한 메모리 양 을 보인다. IoT devices are widely used in network construction and are increasing. If necessary, heterogeneous IoT devices are used for data transmission. This paper proposes to prevent the method of data loss due to differences in throughput when the local network is constructed by Bluetooth 5 and long range network does by LoRa(Long Range). Data loss occur when the data transmits through LoRa, due to the throughputs of Bluetooth 5 faster than that of LoRa. The prevent method proposed by this paper can apply not only Bluetooth 5 and LoRa but heterogeneous IoT devices and expect to prevent data loss due to differences in throughput between heterogeneous IoT devices. Also, this paper shows the simulation result by applying the proposed avoid method. In this paper, two way to the preventive method shows the data transmission ratio and amount of memory that of necessity.
T-DMB 프레임 분석을 통한 효과적인 제한 수신 메시지 전송 방법 설계
서형윤(Hyung Yoon Seo),김동현(Dong Hyun Kim),배병준(Byung Jun Bae),김윤세(Yun Sei Kim),김종덕(Jong Deok Kim) 한국정보과학회 2011 정보과학회논문지 : 정보통신 Vol.38 No.4
T-DMB는 디지털 이동 멀티미디어 방송으로, 유료 방송 서비스를 제공하고자 제한 수신 시스템을 도입했다. 각각의 가입자들을 구별하기 위한 제한 수신 메시지는 가입자의 수가 늘어나게 되면 자연 스럽게 늘어 나게 된다. 그러나 T-DMB에서 전송 가능한 대역폭은 1.152Mbps로 제한되어 있다. 따라서 많은 가입자를 수용하기 위해서는 제한 수신 메시지를 효율적으로 전송해야 한다. 본 논문에서는 제한 수신 메시지 표준에 근거한 ETI Ensemble Frame을 분석한 결과 다음과 같은 효율성의 문제를 발견하였다. 첫째 서로 다른 채널에서 제한 수신 메시지가 중복이 되며, 둘째 Frame의 비효율성으로 인해 낭비가 발생한다. 이러한 문제점을 해결하기 위해서 중복 또는 Frame의 비효율성을 제거하여 제한 수신 메시지를 전송할 수 있는 논리적인 채널 구성 및 전송 방법을 제안한다. 제안된 전송방법을 검증하기 위하여 검증 프로그램을 구현하였고, 기존 표준 제한 수신 메시지 전송방법과 비교하였을 때 약 60%의 전송 효율이 향상되었다. T-DMB, a digital mobile multimedia broadcasting, has adopted Conditional Access System for Pay-TV services. The number of CA Message for distinguishing each subscribers will naturally increase as subscribers increase. However, in T-DMB available bandwidth is limited to 1.152Mbps. Therefore, in order to accommodate more subscribers, CA Message should be transmitted efficiently. In this paper, as the result of analysing CA Message Standards for ETI Ensemble Frame the following issues efficiency were found. First, CA Message are duplicated in the different channels, Second, wasted frame occurs due to inefficiency of frame. In order to solve these problems, logical channel configuration and transmission method that can send CA Messages by eliminating the inefficiencies of duplication, or Frame of CA Message is proposed. Validation program was implemented, to verify the proposed transmission method and the transmission efficiency was 60% improved compare to that of existing standard CA Message.