교류 음 전압에 따른 형광 OLED의 전계 발광 특성

서정현,양재웅,백경갑,주성후,Seo, Jung-Hyun,Yang, Jae-Woong,Paek, Kyeong-Kap,Ju, Sung-Hoo 한국표면공학회 2019 한국표면공학회지 Vol.52 No.2

To study the characteristics of AC driven OLED, we fabricated the fluorescent OLEDs and analyzed the electroluminescence characteristics of OLEDs with AC negative voltage. The luminance and the current density of the OLED decreased, and the number and size of the dark spots increased in proportion to the duration time and level of the applied AC negative voltage. The current efficiency of the OLED was improved when high AC negative voltage was applied within a short time. When the AC negative voltage of 10 V was applied for 1 minute, the efficiency was improved by 12.4%. Also, the degradation of luminance and current efficiency due to the duration of light emission was improved in the case of OLED applied for 1 minute with 10 V AC negative voltage. These are expected as a result of the improvement of the leakage current characteristics by eliminating the short-circuit region formed by the defect of the OLED at the AC negative high voltage. As a result, the continuous application of AC negative voltage reduced the luminance and the current density of OLED, but the temporary application of AC negative voltage with the proper time and voltage could improve the efficiency and lifetime of OLED.

발광층 구조에 따른 백색 인광 OLED의 발광 특성

서정현,백경갑,주성후,Seo, Jung-Hyun,Paek, Kyeong-Kap,Ju, Sung-Hoo 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.6

We studied the emission characteristics of white phosphorescent organic light-emitting diodes (PHOLEDs), which were fabricated using a two-wavelength method. To optimize emission characteristics of white PHOLEDs, white PHOLEDs with red/blue, blue/red and red/blue/red emitting layer (EML) structures were fabricated using a host-dopant system. In case of white PHOLEDs with red/blue structure, the best efficiency was obtained at a structure of red (15 nm)/blue (15 nm). But the emission color was blue-shifted white. In case of white PHOLEDs with blue/red structure, the better color purity and efficiency were observed at a blue (29 nm)/red (1 nm) structure. For additional improvement of color purity in white PHOLEDs with blue (29 nm)/red (1 nm) EMLs, we fabricated white PHOLEDs with red (1 nm)/blue (28 nm)/red (1 nm) structure. The current efficiency, external quantum efficiency, and CIE (x, y) coordinate were 27.2 cd/A, 15.1%, and (0.382, 0.369) at 1,000 $cd/m^2$, respectively.

적색 발광 (Y,Al)VO₄:Eu³⁺ 형광체 나노입자의 합성과 발광 특성

서정현,최성호,남산,정하균,Seo, Jung-Hyun,Choi, Sung-Ho,Nahm, Sahn,Jung, Ha-Kyun 한국재료학회 2012 한국재료학회지 Vol.22 No.2

Red-emitting $Eu^{3+}$-activated $(Y_{0.95-x}Al_x)VO_4$ (0 < x $\leq$ 0.12) nanophosphors with the particle size of ~30 nm and the high crystallinity have been successfully synthesized by a hydrothermal reaction. In the synthetic process, deionized water as a solvent and ethylene glycol as a capping agent were used. The crystalline phase, particle morphology, and the photoluminescence properties of the excitation spectrum, emission intensity, color coordinates and decay time, of the prepared $(Y_{0.95-x}Al_x)VO_4:Eu^{3+}$ nanophosphors were compared with those of the $YVO_4:Eu^{3+}$. Under 147 nm excitation, $(Y_{0.95-x}Al_x)VO_4$ nanophosphors showed strong red luminescence due to the $^5D_0-^7F_2$ transition of $Eu^{3+}$ at 619 nm. The luminescence intensity of $YVO_4:Eu^{3+}$ enhanced with partial substitution of $Al^{3+}$ for $Y^{3+}$ and the maximum emission intensity was accomplished at the $Al^{3+}$ content of 10 mol%. By the addition of $Al^{3+}$, decay time of the $(Y,Al)VO_4:Eu^{3+}$ nanophosphor was decreased in comparison with that of the $YVO_4:Eu^{3+}$ nanophosphor. Also, the substitution of $Al^{3+}$ for $Y^{3+}$ invited the improvement of color coordinates due to the increase of R/O ratio in emission intensity. For the formation of transparent layer, the red nanophosphors were fabricated to the paste with ethyl celluloses, anhydrous terpineol, ethanol and deionized water. By screen printing method, a transparent red phosphor layer was formed onto a glass substrate from the paste. The transparent red phosphor layer exhibited the red emission at 619 nm under 147 nm excitation and the transmittance of ~80% at 600 nm.

플라즈마의 바이오 분야 응용에 관한 연구 동향

서정현,Seo, Jeong-Hyeon 한국정보디스플레이학회 2014 인포메이션 디스플레이 Vol.15 No.3

교류 구동 방법에 의한 유기전계발광소자 발광 특성의 모델

서정현,주성후,Seo, Jung Hyun,Ju, Sung Hoo 한국재료학회 2021 한국재료학회지 Vol.31 No.10

This paper proposes a mathematical model that can calculate the luminescence characteristics driven by alternating current (AC) power using the current-voltage-luminance (I-V-L) properties of organic light emitting devices (OLED) driven by direct current power. Fluorescent OLEDs are manufactured to verify the model, and I-V-L characteristics driven by DC and AC are measured. The current efficiency of DC driven OLED can be divided into three sections. Region 1 is a section where the recombination efficiency increases as the carrier reaches the emission layer in proportion to the increase of the DC voltage. Region 2 is a section in which the maximum luminous efficiency is stably maintained. Region 3 is a section where the luminous efficiency decreases due to excess carriers. Therefore, the fitting equation is derived by dividing the current density and luminance of the DC driven OLED into three regions, and the current density and luminance of the AC driven OLED are calculated from the fitting equation. As a result, the measured and calculated values of the AC driving I-V-L characteristics show deviations of 4.7% for current density, 2.9 % for luminance, and 1.9 % for luminous efficiency.

교류전원 구동방식에 의한 형광 OLED의 발광 특성

서정현,김지현,주성후,Seo, Jung-Hyun,Kim, Ji-Hyun,Ju, Sung-Hoo 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.2

To operate organic light emitting device (OLED) with alternating current (AC) power source without AC/DC(direct current) converter, we fabricated the fluorescent OLED and measured the emission characteristics with AC and DC. The OLED operated by AC showed higher maximum current efficiency of 8.2 cd/A and maximum power efficiency of 8.3 lm/W. But current efficiency and power efficiency of AC driven OLED showed worse than DC driven OLED at high voltage above 10 V. This result can be explained by the peak voltage of AC was $\sqrt{2}$ times than DC, In case of low driving voltage the emission characteristics were improved by the peak voltage of AC, but in case of high driving voltage the emission efficiencies were decreased by the roll off phenomena. Finally, serial OLED arrays using twelve OLEDs driven by AC 110 V showed average voltage of 9.17 V, voltage uniformity of 99.0%, average luminance of $1,175cd/m^2$, luminance uniformity of 94.4%.

OMI 위성 자료와 국가 배출량 자료를 활용한 동아시아의 NO_x, SO_x 변화 장기 분석(2005-2015)

서정현,윤종민,추교황,김덕래,이동원,Seo, Jeonghyeon,Yoon, Jongmin,Choo, Gyo-Hwang,Kim, Deok-rae,Lee, Dong-Won 대한원격탐사학회 2020 大韓遠隔探査學會誌 Vol.36 No.2

동아시아 지역은 최근 인구급증과 경제성장으로 인해 화석연료의 사용이 증가함에 따라 이로 인한 대기오염물질 배출이 증가하여 대기질이 점차 악화되고 있다. 본 연구에서는 OMI (Ozone Monitoring Instrument) 위성 자료와 국가 대기오염물질 배출량 자료(National Emission Inventory)를 활용하여 동아시아의 대기현황 및 우리나라의 대기질에 국내외 배출량이 미치는 영향을 분석하고 이를 기반으로 미래 배출량을 추정하였다. 2005년부터 2015년까지 동아시아의 NO₂, SO₂ 농도를 분석한 결과, 두 물질 모두 NEC (North East China), SEC(South East China), SMA (Seoul Metropolitan Area) 순으로 높았다. SO₂는 우리나라와 중국의 편차가 크게 나타나NEC 지역은 SMA보다 1.63배 높았다. 농도비와 배출비 분석을 통해 국외 배출원이 우리나라 대기환경에 미치는 영향을 간접적으로 파악할 수 있었는데, NO₂/SO₂ 농도비는 우리나라와 중국 모두 2013년에 가장 높았고, SMA의 NO_x/SO_x 배출비는 2013년 이후 22% 이상 증가했다. 국내 배출량은 지속적으로 감소했으나 농도-배출량 비율(NO₂/NO_x, SO₂/SO_x)은 점차 증가하는 것으로 분석되었으며, 이는 곧 국내 배출량 외에 다른 요인(국외 배출원, 체류시간 변화 등)이 우리나라 수도권의 대기질에 영향을 주고 있다는 것으로 해석된다. SMA의 미래 배출량은 2025년에 NO_x, SO_x가 각각 296.2, 39.0 kton, 2035년에는 284.4, 33.8 kton 만큼 배출될 것으로 예측되었다. 본 연구에서는 공간적 제약을 받지 않는 위성자료의 장점을 이용하여 농도와 배출량 사이의 유의미한 결과를 도출하였으며, 이 연구에서 사용된 위성관측 농도와 배출량 간의 상호비교 분석방법론과 GEMS(Geostationary Environment Monitoring Spectrometer) 위성 산출물을 활용하여, 향후 국내 대기질 영향요인을 파악하기 위한 국외 발 대기오염물질 기여도 분석과 배출 인벤토리 보완을 위한 기초 자료를 제시할 수 있을 것으로 기대한다. Data from the Ozone Monitoring Instrument (OMI) satellite and national emission inventories were used in this study to analyze air quality in East Asia and estimate the impact of domestic and foreign emissions on South Korea's air quality, based on which future emissions were predicted. The concentration trends of nitrogen dioxide (NO₂) and sulfur dioxide (SO₂) in East Asia from 2005 to 2015 showed that both substances were highest in North East China (NEC), followed by South East China (SEC) and Seoul Metropolitan Area (SMA). The average SO₂ concentration was 1.63 times higher in NEC than in SMA. Analysis on the ratios of NO₂/SO₂ and NO_x/SO_x provides an indirect picture of the effect of transboundary air pollutants on atmospheric composition in Korea. The concentration ratio of NO₂/SO₂ in all study areas peaked in 2013 and SMA's emission ratio of NO_x/SO_x increased in 2015 by over 22% from 2013. Despite the reduction in domestic emissions, the concentration-to-emission ratios (NO₂/NO_x, SO₂/SO_x) rose gradually, which implies that other factors besides domestic emissions (e.g., foreign sources, lifetime, etc.) influence air quality in SMA. We estimated future emissions of NO_x and SO_x in SMA to be 296.2 and 39.0 ktons in 2025 and 284.4 and 33.8 ktons in 2035, respectively. Application of the inter-comparison techniques of this study to the data from the Geostationary Environment Monitoring Instrument (GEMS) is expected to provide concrete information which can be used to improve national emission inventories and figure out factors and sources that affect domestic air quality.

AC PDP의 구동 방법과 개발 동향

서정현,Seo, Jeong-Hyeon 한국정보디스플레이학회 2001 한국정보디스플레이학회지 Vol.2 No.4

피지컬 컴퓨팅 기반의 인터랙티브 프로토타이핑 프로그래밍 학습모형 개발 및 적용

서정현,Seo, Jeonghyun 한국정보교육학회 2018 정보교육학회논문지 Vol.22 No.3

피지컬 컴퓨팅은 컴퓨팅을 인간과 환경, 사물의 영역으로 확장한 개념으로 하드웨어와 소프트웨어 통합한 물리적 산출물 기반의 프로그래밍 학습매체로 주목받고 있다. 본 연구에서는 기술적 자유도가 높은 피지컬 컴퓨팅의 특징을 활용한 인터랙티브 프로토타이핑 기반의 프로그래밍 학습 모형을 개발하고 실험연구를 통해 학습 효과를 분석하였다. 실험처치 효과 검증을 위해 초등학교 5학년 59명 학습자를 대상으로 실험집단과 통제집단으로 구성하고 실험집단에는 인터랙티브 프로토타이핑 프로그래밍 학습모형을 적용하고 통제집단에는 선형순차 프로그래밍 학습모형을 적용하였다. 실험처치 전 후 정보과학 창의적 성향 검사를 실시하였고 두 집단의 사전검사 점수를 공변량으로 처리한 공분산분석(ANCOVA) 결과 유의수준 .05에서 학습 효과가 있음을 증명하였다. 이를 통해 초등학교 5학년 학습자를 대상으로 피지컬 컴퓨팅 기반의 인터랙티브 프로토타이핑 프로그래밍 학습모형의 프로그래밍 학습에 적용 가능성을 시사한다. Physical computing is the concept of expanding computing to humans, environments, and objects. It draws attention as a programming learning medium based on physical outputs in integration of hardware and software. This study developed a programming learning model based on interactive prototyping using the characteristics of physical computing with a high degree of technical freedom and analyzed its learning effect in an experiment. To examine the effect of the experimental treatment, this researcher divided fifty nine 5th-grade elementary students into an experimental group and into a control group. the interactive prototyping programming learning model was applied to the experimental group, and a linear sequential programming learning model was applied to the control group. Information Science Creative Personality Test was conducted before and after the experimental treatment. Analysis of Covariance was conducted with the pre-test scores of the two groups. As a result, it was proved that there was the effect of learning at the significance level of .05. It indicates that the physical computing based interactive prototyping programming learning model is applicable to the programming learning for 5th-grade elementary students.

메쉬 부류 네트워크를 피터슨-토러스(PT) 네트워크에 임베딩

서정현,이형옥,장문석,Seo, Jung-Hyun,Lee, Hyeong-Ok,Jang, Moon-Suk 한국정보처리학회 2008 정보처리학회논문지 A Vol.15 No.4

본 논문은 분지수가 상수인 네트워크들을 피터슨-토러스(PT) 네트워크에 임베딩 가능함을 보인다. 상호연결망 G가 H에 임베딩 되면 G에서 설계된 병렬 알고리즘을 상호연결망 H에 적용할 수 있다. 토러스(메쉬)를 PT에 연장율 5, 밀집율 5 그리고 확장율 1에 일대일 임베딩 하였고, 허니컴브 메쉬를 PT에 연장율 5, 밀집율 2 그리고 확장율 5/3에 일대일 임베딩 하였다. 추가로 평균 연장율을 분석하였다. 널리 알려진 토러스 와 허니컴브 메쉬 네트워크를 연장율과 밀집율을 5이하에 PT에 임베딩 함으로써 웜홀 라우팅 방식과 store-and-forward 방식 모두에서 임베딩 알고리즘이 사용 가능하고, 일대일 임베딩을 함으로써 시뮬레이션시 프로세서 작업 처리량을 최소화 하였다. In this paper, we prove mesh-like networks can be embedded into Petersen-Torus(PT) networks. Once interconnection network G is embedded in H, the parallel algorithm designed in Gcan be applied to interconnection network H. The torus is embedded into PT with dilation 5, link congestion 5 and expansion 1 using one-to-one embedding. The honeycomb mesh is embedded into PT with dilation 5, link congestion 2 and expansion 5/3 using one-to-one embedding. Additional, We derive average dilation. The embedding algorithm could be available in both wormhole routing system and store-and-forward routing system by embedding the generally known Torus and honeycomb mesh networks into PT at 5 or less of dilation and congestion, and the processor throughput could be minimized at simulation through one-to-one.