http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
실제 대국을 위한 임베디드 환경 바둑 기보 저장 시스템
서원성(WonSeoung Seo),정기철(Keechul Jung) 한국게임학회 2020 한국게임학회 논문지 Vol.20 No.3
현재 수기로 진행하는 오프라인 바둑 대국의 기보 입력 자동화를 위해서, 대국 현장에서 직접 사용할 전용 임베디드 보드를 이용한 시스템이 필요하다. 본 논문은 임베디드 보드의 영상처리 환경에서 조명에 강건한 처리를 위하여 물체의 형태 정보와 색상 정보를 통합하여 사용하며, 물체 추출을 위해서는 연결 성분 분석, 에지 정보, 색상 정보를 결합해서 사용하고, 영상 처리 각 단계에서 바둑판의 고유 정보를 이용하여 연산단계를 줄였다. 결과적으로 임베디드 환경에서 연산을 최소화하여 실제 실시간 대국 환경에서도 신뢰성 높은 기보를 자동으로 저장할 수 있도록 구현하였다. An automated system using a embedded board is required to generate the notation input of the offline Go game. This paper integrates shape and color information of the objects on the Go game board for light-insensitive processing and reduces the computation step. This paper combined the detection of obstacles using connected components with the computation of canny edge detection and HSV-based detection. As a result, the processing time is reduced in the embedded environment so that reliable notation can be automatically stored even in real-time play environment.
박종문,서원성 충북대학교 한국과학재단 지정 첨단원예기술개발연구센터 1996 연구보고서 Vol.1 No.-
원지의 분석결과를 바탕으로 원료를 배합하고, 실험적으로 수초지를 제조하여 물성을 측정하고 비교·분석하여 다음과 같은 결론을 얻었다. 1) 육묘용 수입 포트 원지의 특성 ① 육묘용 포트지의 사용환경의 특성상 일반종이보다 높은 습윤강도를 가진다. 즉 인장강도의 경우 건조강도의 약 35% 이상, 파열강도의 경우 건조강도의 약 60%이상의 습윤강도를 나타낸다. ② 일정기간 후, 즉 육묘판으로 부터 경작지로 이식될 때 일정강도를 유지하기 위하여 합성섬유를 일정비율(약 30%로 추정) 혼용하였다. ③ 수분, 공기 등의 효율적 이동을 위하여 높은 통기성을 가진다. (약 10 Gurly sec) 2) 실험실적으로 제조한 수초지의 물성 ① 사이징 처리 : AKD를 건조 펄프 무게에 대하여 0.5% 첨가하여 충분한 사이즈도를 얻을 수 있었다. 0.5% 이상 투입할 경우 사이즈 효과는 향상되나 강도 저하의 원인이 된다. ② 습윤지력증강제 : 강도적 측면에서는 건조 펄프 무게의 2% 첨가가 가장 좋은 결과를 보였으나, 통기성을 고려한다면 1% 첨가가 적절할 것으로 사료된다. ③ 따라서 최적 지료조성비는 T3-1이며, 강도적 측면에서는 수입 포트 원지 보다 우수하나, 통기성이 다소 낮으므로 이를 개선하기 위해서는 원료 펄프의 고해도를 낮추는 것이 필요하다고 사료된다.
조남석,한규성,서원성 한국목재공학회 1998 목재공학 Vol.26 No.4
The availability of Large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethan (PU) foams are prepared with reacting isocyanates and polyols, and are used in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanedisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate/hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liqnefying woody materials. Liquefying rate was increased with move than 3% addition of inorganic and organic catalysts and raising reaction temperature more than 150℃ . Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted its 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rats. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents issue significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted edition.
최태호,조남석,서원성,김종규,양윤욱 한국목재공학회 1993 목재공학 Vol.21 No.3
This study was attempted to develop the Special Sheet Former for Hanji (Korean Traditional Paper), which could be easily used anyone who has no any special skill, and to evaluate its sheet forming characteristics. The sheet former for Hanji was designed, manufactured and tested its sheet forming features. 'This former was resulted in superior even basis weights and good formation of sheets without any special technological experiences, but poor consolidation according to the difficulty of web pressing during dewatering process. Sulfomethylated pulping resulted in the superior pulp with high yield and better quality compared to those of alkali and alkali-peroxide pulps. Since the pulp was so bright, there was almost no need additional bleaching.