http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
입방정 집합조직을 가진 고순도 알루미늄의 염산용액 중 전해에칭 연구
서도수,김흥식 울산대학교 2002 공학연구논문집 Vol.33 No.2
입방정 (100)<001> 집합조직을 가진 고순도 알루미늄 포일을 묽은 염산에 에칭함으로서 직경 1~2㎛ 인 관통형 터널피트를 단위면적당 약 10^{7}개 이상 형성하여 알루미늄 전해캐퍼씨터의 정전용량을 극대화시키는 연구를 수행하였다. 고순도 알루미늄 포일을 이용하여 전류밀도 및 통전량의 변화에 따라 포일에 형성된 에치피트의 관찰과 정전용량의 변화를 측정하여 내전압 265V_{f}에서는 전류밀도가 150mA/cm²에서 최대의 정전용량값(1.70μF/cm²)을 얻었으며, 내전압 540V_{f}에서는 전류밀도가 200mA/cm²에서 정전용량이 최대값(0.60μF/cm²)이었고, 내전압 600V_{f}에서는 전류밀도가 200mA/cm²에서 최대의 정전용량의 값(0.58μF/cm²)을 얻었다. 또한, 내전압 265V_{f}에서는 통전량 60 Coulomb/cm², 540V_{f}및 600V_{f}에서 68 Coulomb/cm²이 최적 전해에칭 조건이었다. A Study on capacitance gain of high voltage aluminium electrolytic capacitor has been conducted by etching cubic textured aluminium foil in hydrochloric acid. Capacitance obtained by etching and anodizing of aluminium of was decreased with the increase of anodizing voltage. Maximum capacitance obtained by anodizing at 260V was 1.70μF/cm², however, maximum capacitance obtained by anodizing at 600V was 0.58μF/cm². Optimum electrochemical etching conditions for obtaining maximum capacitance was varied according to anodizing voltage of etched aluminium foil.
409 Stainless steel muffler의 pitting corrosion 발생 원인 규명
서도수,송용화,김흥식 울산대학교 2002 공학연구논문집 Vol.33 No.2
머플러의 재질은 배기 온도의 고온화와 배기가스 정화 시스템 부착에 따른 내열성 및 내식성이 우수한 재료가 요구되며, 현재 사용 중에 있는 배기계용 재료에는 알루미늄 도급 강판, 스테인레스 409L, STS 436 등이 있는데, 각 재료는 품질 특성 및 수명이 고려되어 배기계 재료의 여러 부위의 요구 조건에 맞게 선택되어 적용되고 있다 경제적인 이유로 인하여 스테인레스 409L을 많이 사용하고 있는데 일부 차종에서는 단시간내에 안쪽 부분에서 피트(pit)가 발생하여 관통되는 사례가 빈번하게 발생되고 있는 실정이다. 따라서, 본 연구에서는 머플러의 부식원인을 규명하기 위해 부식이 진행되어 관통되어진 소음기를 수거하여 FE-SEM으로 관찰분석하고, 409 스테인레스 강을 염수분무실험을 통하여 소음기 부식원인을 규명하였다.
이광학,서도수,김흥식 울산대학교 2000 공학연구논문집 Vol.31 No.1
홈부식으로 누수사고가 발생한 급수관 시료를 SEM/ECS로 분석하고 황 함유량이 전봉강관의 부식전위와 홈부식 감수성에 미치는 영향에 대하여 연구하였다. 급수용 배관으로 사용한 전기저항 용접강관은 황 함유향이 낮은 경우(55ppm)에는 홈부식이 잘 발생하지 않았으나, 황 함유량이 높은 경(100 ppm 이상)에는 홈부식이 쉽게 발생하여 4년 이내에 홈부식으로 관통되어 누수되는 사례가 관찰되었다. 용접부와 열영향부는 결정입도가 미세하여 모재부보다 부식성이 더 높지만 홈부식을 유발하는 근본요인은 아니었고, 전기저항 용접강과능 NaCl수용액(3.5wt.%)에서 황 함유량이 증가함네 따라 부식전위가 감소하였으며 홈부식인자는 증가하였다. 즉 황을 20ppm함유한 강관의 부식전위는 -700mV.SCE이고 홈부식인자는 1.2이며 화을 100ppm 함유한 강의 부식전위는 -750mV.SCE이고 홈부식인자는 1.36이었고 전봉강관 단면부식전위는 표면부식전위보다 약 20mV.SCE 낮은 값을 보였다. A research for the influence of sulfur content in ERW carbon steel pipe on the corrosion potential and the grooving corrosion sensitivity has been conducted. ERW carbon steel pipe containing lower sulfur content(55ppm S)used in tap water supply was not easily corroded at the weld line, however, higher sulfur(100ppm) containing pipe was heavily corroded at the weld line locally and leaked within 4 years of water supply. Corrosion potential and grooving factor depended so strongly on sulfur content that the more fine grains structure of HAZ and weld metal than base metal can not be the main causes of grooving corrosion. The corrosion potential of cross section of pipe was lower about 20mV than that of the surface of pipe.
김영홍,이광학,김영진,서도수,이재운,김흥식 울산대학교 1999 공학연구논문집 Vol.30 No.2
반응온도가 증가할수록 Brand별 철광석의 환원율은 증가하였으며 일정반응온도에서 원광석형태인 Romeral 보다 펠렛형태인 CVRD,IOC 및 ALG 시편의 환원율이 더 높음을 알수 있었고 펠레시편 중 IOC가 타 시편에 비해 환원율이 가장 큼을 알 수 있었다. 수소가스에 의한 원광석 및 펠렛시편의 환원반응에서 전반응속도는 계면화학반응에 의해 율속됨을 알 수 있었으며, 활성화에너지값은 Romeral, CVRD, IOC 및 ALG의 경우 각각 약 4.8, 7.7, 4.5 및 5.3kcal/mol이었다. 이들 활성화에너지값으로부터 수소가스에 의한 환원반응은 펠렛형인 IOC가 가장 우수함을 알 수 있었다. In order to get an fundamental data to select a suitable ore brand for hydrogen reduction, the reaction kinetics of hydrogen for ore brands was investigated. Four kinds of ore brands such as Romeral ore, CVRD, IOC,ALG pellet were selected for this experiment. It was observed that the reduction ratio of pellets was higher than ore and IOC pellet showed the highest in comparing with other pellets. The kinetics data was fitted to [1-(1-R)1/3] = kt for surface reaction control. The activation energy for the reduction of Romeral, CVRD, IOC and ALG were 4.8, 7.7, 4.5 and 5.3 kcal/mol respectively. It was shown that the overall reduction rate was controlled by surface reaction. And also, we can get result that IOC was the most suitable ore for the reduction with hydrogen gas among the specimens