http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레이저 스캐닝 속도가 SLS 3-D 프린팅 융착 형성 층에 미치는 영향
박정빈(Jeongbin Park),이동현(Donghyun Lee),강호종(Ho-Jong Kang) 한국고분자학회 2018 폴리머 Vol.42 No.5
SLS 3-D 프린팅에 의한 고분자 분말 융착 공정에서 레이저 스캐닝 속도가 층 형성에 미치는 영향을 살펴보았다. Galvano 스캐너에 비하여 상대적으로 레이저 스캐닝 속도가 느린 X-Y 스캐너를 사용하는 경우, 레이저가 분말에 조사되는 시간이 길어 융착보다는 용융에 가까운 층 형성이 일어남을 확인하였다. 그 결과, 층 두께는 깊어지고 선폭은 넓어짐을 알 수 있었다. 하지만, 형성 층의 밀도와 치수안정성은 스캐닝 속도에 크게 영향을 받지 않음을 확인하였다. 이와 함께 가해진 에너지 밀도에 따른 융착과 융융에 의한 형성 층의 형태학적 차이에 의하여 구조체의 강도는 현저하게 달라짐을 알 수 있었다. The effect of laser scanning speed on the formation of sintered layer in SLS 3-D polymer printing was studied. The melting behavior of polymer powders was found in formed layer when X-Y scanner was used in SLS 3-D printing due to the increase of laser exposure time on powder. However, sintering between polymer powders was dominated when Galvano scanner was applied with rapid laser scanning speed. As a result of melting behavior, the layer thickness increased and wide layer width was obtained in the layer made by X-Y scanner. However, the laser scanning speed did not affected the density and dimensional stability of layer, but the difference of flexural strength was noticed between formed layers having sintering and melting appearance of polymer powders.
유무기 하이브리드 SLS 3-D 프린팅 소재 특성 연구
박정빈(Jeongbin Park),강호종(Ho-Jong Kang) 한국고분자학회 2018 폴리머 Vol.42 No.6
SLS 3-D 프린팅 적층 공정에서 형성 층의 치수 안정성 향상을 위하여 유리 비드를 첨가하여 이에 따른 적층가공성 변화와 융착 공정으로 만들어진 형성 층의 물성 변화를 확인하여 보았다. 나일론 분말에 유리 비드를 15% 이내로 첨가하면 분말 흐름 특성을 판단하는 Hausner ratio가 증가하나 1.25로 제한되어 SLS 3-D 프린팅 분말 슬라이싱 공정에는 지장이 없음을 확인하였다. 유리 비드의 첨가는 형성 층의 치수 안정성을 향상시키는 동시에 flexural strength 또한 증가시킴을 알 수 있었다. 유리 비드를 나일론 용액으로 코팅하는 경우, 융착 공정이 개선됨을 알 수 있었으며 그 결과, 추가적인 치수 안정성 증가와 flexural strength 개선을 확인할 수 있었다. Glass bead was introduced to enhance the dimensional stability in the layer made by SLS 3-D printing. The effects of glass bead on the slicing process and physical properties of layer made by sintering process were investigated. It was found that Hausner ratio which shows the flow ability of powder increased by glass bead but it was remained under 1.25 which did not affect the slicing characteristic of nylon powder in SLS 3-D printing by addition of glass bead less than 15%. The enhancement of dimensional stability and increase of flexural strength were noticed in the layer made by nylon with glass bead. Further improvements on dimensional stability and flexural strength were found when nylon coated glass bead was applied.
선택적 레이저 소결 3차원 인쇄공정을 위한 Poly(ether imide)의 미세구 제조에 관한 연구
최범순(Beom Sun Choy),박정빈(Jeongbin Park),강호종(Ho-Jong Kang),이동현(Dong Hyun Lee) 한국고분자학회 2017 폴리머 Vol.41 No.3
본 연구에서는 선택적 레이저 소결 3차원 인쇄공정에 활용하기 위해 poly(ether imide)(PEI)의 균일 용액에서 침전 작용을 통해 미세구(microspheres)를 제조하였다. 이를 위해 PEI와 poly(vinyl alcohol)(PVA)가 용해된 dimethylacetamide(DMAc) 용액에 PVA 수용액의 액적을 천천히 공급하여 PEI 미세구 입자가 형성하도록 유도하였다. 미세구의 크기 및 크기분포는 PEI와 안정제로 사용한 PVA의 농도, 교반속도 및 용액의 온도를 조절함으로써 결정되는 것을 광학현미경 및 주사전자현미경 실험을 통해 확인하였다. 또한 제조된 PEI의 미세구는 선택적 레이저 소결 공정에 적용하기 위해 Hausner 수를 결정함으로써 미세구의 우수한 흐름특성을 확인하였으며, 이를 필름형태로 3차원 인쇄된 시편을 인장실험하여 이들의 기계적 특성을 분석하였다. In this work, we describe an effective method to produce uniform microspheres of poly(ether imide) (PEI) via precipitation behavior of polymers from homogeneous solutions. The PEI microspheres were obtained by dropwise addition of a precipitant that was an aqueous solution of poly(vinyl alcohol) (PVA) as a stabilizer into a dimethylacetamide (DMAc) solution of PEI and PVA. The size and size-distribution of PEI microspheres could be determined by precisely controlled concentrations of PEI and PVA, agitation speeds, and temperatures. For applications of selective laser sintering (SLS) process, flow properties of PEI microspheres were characterized by measuring the Hausner numbers. In addition, mechanical properties of the PEI microspheres were measured by conducting tensile tests.
김희영(Kim Hee Young),박정빈(Park Jeongbin),금유정(Keum Yujeong),여인금(Yeo Inkeum),엄동명(Eom Dongmyung),송지청(Song Jichung) 대한한의학원전학회 2021 대한한의학원전학회지 Vol.34 No.2
Objective : 脈診은 한의학의 전형적인 진단방법 중 하나로써 환자의 맥 변화을 확인하고 이를 바탕으로 환자의 상태와 질병을 파악하는 방법이다. 한의사는 손끝의 감각을 이용하여 환자의 맥의 빠르기, 맥의 세기, 맥의 형태 등을 구별하고 이를 바탕으로 진단을 하는데, 이를 ‘脈象’이라는 표현을 통해 문헌에 묘사하였다. 그러나 脈象에 대한 문헌의 설명은 손끝의 감각을 글로 표현한 것이기 때문에 그 실체를 파악하기가 쉽지 않다. 일반인들도 ‘한의사의 진단은 脈診’이라고 여기는 것처럼 脈診은 한의학의 가장 일반적인 진단 방법임과 동시에 주요한 술기이지만 脈診 자체가 한의사의 손끝 감각에 있고, 또 이를 지식화한 것도 문헌의 표현에 국한되어 있기 때문에 진단방법으로써 맥진은 파악하기 힘들다. 인체의 긴장이 요골동맥에 미치는 영향을 초음파기기를 활용하여 파악하고 이렇게 파악된 요골동맥의 변화는 맥상으로 어떻게 표현할 수 있는지 살펴보고자 하였다. 즉 인위적으로 인체의 긴장을 유발하고 이 결과로 나타나는 요골동맥의 변화를 살펴보며 그 결과값을 어떻게 해석할 수 있는지에 대해 논의하였다. Methods : 1) 초음파[LOGIQ 5 Basic, GE, USA]의 5cm 길이 linear probe를 이용하여 지원자의 요골동맥의 두께를 측정한다. 2) 악력측정기[Gripmeter ks-301, Lavisen, Korea]를 이용하여 1분간 자극을 가해 인위적으로 피로도를 높인다. 3) 긴장을 발생시킨 후 요골동맥의 두께를 측정한다. 4) 사후검정 (Post Hoc Test)으로 Tukey test 또는 paired t-test로 분석하였다. Results : 모든 시험 대상자는 악력측정기를 이용한 악력 가압 이전과 이후를 비교하였을 때 요골동맥의 두께가 줄어들었다(Fig. 24; p<0.001). Conclusion : 인체에 가해진 인위적 긴장을 통해 나타난 요골동맥의 수축은 寒邪에 의해 나타난 緊脈과 같이 직경이 줄어든 형태를 의미한다. Objectives : Pulse diagnosis is one of the main diagnostic methods of Korean Medicine that understands the patient s condition and illness by reading changes in the patient s pulse, which is described in terms of pulse condition While they are described in detail in medical texts, it is difficult to grasp their true nature, as the written descriptions fail to do justice to the experience of pulse taking it tries to convey. As a way to approach pulse condition the effect of the body s tension on the radial vein was measured using an ultrasonic device, after which the measured changes and how they could be reflected in pulse condition were studied. In other words, changes in the radial vein following induced tension were analyzed. Methods : 1) The thickness of the subject s radial vein was measured using a linear probe of an ultrasonic device[LOGIQ 5 Basic, GE, USA]. 2) Fatigue level was increased through artificial stimulation using the Gripmeter[ks-301, Lavisen, Korea]. 3) Thickness of the radial vein post tension induction was measured. 4) The results were analyzed with the Tukey test or paired t-test as post hoc tests. Results : Thickness of the radial vein of the subject pre- and post- Gripmeter stimulation decreased with significance. Conclusions : Constriction of the radial vein that happened after tension induction could be linked to the Tight Pulse[緊脈] that is related to patterns of contraction and pulling.