http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박재혁(Jae Hyeok Park),김규민(Kyu Min Kim),이재응(Jae Eung Lee) 대한기계학회 2018 대한기계학회 춘추학술대회 Vol.2018 No.12
Particle damper is a device that acts as an attenuator by filling the particles inside the enclosure and generating energy dissipation due to collision and friction between the particle and the enclosure. Many studies are performed to investigate the effect of variables, such as particle size, mass ratio, gap size, etc. to the damping performance of a single chamber particle damper. In this paper, a dual chamber is proposed to improve the damping performance, and an experimental study is carried out to confirm the damping performance in a low frequency band by installing a particle damper on a cantilever beam.
박재혁(Jae-Hyeok Park),지선학(Seon-Hak Ji) 한국정보보호학회 2015 情報保護學會誌 Vol.25 No.6
최근에 모바일 장치 관련 정보 유출과 더불어 유출된 정보를 악용한 범죄가 빈번하게 일어남에 따라 정보호호에 대한 관심과 중요성이 높아지고 있다. 국내 모바일 장치 관련 사용자 수도 해를 거듭할수록 기하급수적으로 증가하고 있는 추세이며, 이에 따른 모바일 장치의 보안에 대한 중요성 역시 대두되고 있다. 그 중에서도 사용자 측의 모바일 잠금 기술인 비밀번호, PIN, 얼굴 인식 등의 기능을 활용하여 사용자 모바일 장치에 대한 암호 보안 기술을 적용하고 있다. 또한 사용자들의 개인정보를 다루는 서비스 이용이 증가함에 따라 모바일 장치 자체의 보안에 대한 안전한 처리 문제, 편리성, 효율성 등을 고려한 문제점이 대두되고 있다. 본 지에서는 사용자 모바일 장치 잠금 관련 동향을 분석하고, 이와 관련된 모바일 장치 잠금 어플리케이션의 한계점에 대해서 살펴본다. 또한 현 모바일 장치 잠금 시스템이 직면하는 보안성과 편의성의 한계점을 보완하기 위한 위치 정보 기반의 모바일 장치 보안 시스템을 제안한다.
용융알루미늄 도금 강판 상에 스퍼터링법으로 형성된 마그네슘 코팅막에 의한 내식성 향상
박재혁(Jae-Hyeok Park),김순호(Soon-Ho Kim),정재인(Jae-In Jeong),양지훈(Ji-Hoon Yang),이경황(Kyung-Hwang Lee),이명훈(Myeong-Hoon Lee) 한국표면공학회 2018 한국표면공학회지 Vol.51 No.4
In this study, Mg films were prepared on hot dip aluminized steel (HDA) by using a sputtering method as a high corrosion resistance coating. The corrosion resistance of the Mg films was improved by controlling the morphology and the crystal structure of films by adjusting the Ar gas pressure during the coating process. Anodic polarization measurement results confirm that the corrosion resistance of the Mg films was affected by surface morphology and crystal structure. The corrosion resistance of the Mg coated HDA specimen increased with decreasing crystal size of the Mg coating and it was also improved by forming a film with denser morphology. The crystal structure oriented at Mg(101) plane showed the best corrosion resistance among crystal planes of the Mg metals, which is attributed to its relatively low surface energy. Neutral salt spray test confirmed that corrosion resistance of HDA can be greatly improved by Mg coating, which is superior to that of HDG (hot dip galvanized steel). The reason for the improvement of the corrosion resistance of Mg films on hot dip aluminized steel was due to the barrier effect by the Mg corrosion products formed by the corrosion of the Mg coating layer.
바이오 인식 기술 적용 현황 및 서비스 문제점 연구 (모바일 기기를 중심으로)
송초롱,박재혁,이재우,Song, Cho-Rong,Park, Jae-Hyeok,Lee, Jae-Woo 한국정보보호학회 2015 情報保護學會誌 Vol.25 No.3
최근 카드사 정보 유출과 더불어 유출된 개인정보를 악용한 범죄가 빈번하게 일어남에 따라 정보보호에 대한 관심과 중요성이 높아지고 있다. 국내 스마트폰 가입자 수도 4100만 명을 넘어가면서 모바일 보안에 대한 중요성 역시 강조되고 있는 가운데 지문, 홍채, 얼굴, 목소리, 눈동자 등 개개인의 고유 정보를 이용하여 인증하는 바이오 인식 기술이 주목을 받고 있다. 최근 휴대폰 제조업체들도 스마트폰 기기 내에 바이오 인식 기술을 탑재하여 기존의 인증 방식인 잠금 패턴이나 PIN 방식보다 강화된 보안성을 제공하고 있다. 또한 모바일 결제 서비스 이용 증가에 따라 바이오 인식 결제 서비스를 제공.이용할 수 있어 그 활용성은 매우 클 것으로 전망된다. 하지만 바이오 데이터의 안전한 처리 문제, 바이오 인식 서비스의 부족 등과 같은 문제점이 따르는 실정이다. 본고에서는 바이오 인식 기술의 적용 현황 및 국내외 동향을 살펴보고 바이오 인식 시장의 문제점 분석과 이에 따른 개선 방향에 대해서 연구한다.
박희정(Hee-Jeoung Park),박재혁(Jae-Hyeok Park),김규민(Gyu-Min Kim),이재응(Jae-Eung Lee) 대한기계학회 2017 대한기계학회 춘추학술대회 Vol.2017 No.11
The multi-function dot printer is printing equipment that wires of a head strike an ink ribbon on a paper. The dot printer always produces noise problems. The printer`s main source of noise is the head, carriage motor, and platen, which are located adjacent to the printer`s small interior space. Therefore, in the measurement of each noise source, there are difficulties due to narrow space and adjacent noise sources. In this paper, we analyze the contribution of the noise generated by the each noise source through the spectrum measurement and propose the noise reduction method based on these analysis.
강원욱(Won Uk Kang),박재혁(Jae Hyeok Park),이재응(Jae Eung Lee) 대한기계학회 2018 대한기계학회 춘추학술대회 Vol.2018 No.12
Damping devices such as vibration isolation rubbers and oil dampers cause additional devices and environmental problems. In this paper, a polymer film wrapped spring is installed in a shock absorbing device using an experimental design method and the damping performance is tested using impact testing. In this experiment, the influence of the variables (film type, film tension, layer, how to surround) that affect damping performance of polymer film wrapped spring is investigated. Using MINITAB, the conditions that can optimize the damping effect are found, and the results are validated through simulation and experiments.
장원용(Won-Yong Jang),박종원(Jong-Won Park),박재혁(Jae-Hyeok Park),변진규(Jin-Kyu Byun),김남(Nam Kim) 한국자기학회 2022 韓國磁氣學會誌 Vol.32 No.1
In this paper, the magnetic field of the domestic induction cooktop is measured according to the IEC standard and the values are compared with exposure limits in the international EMF (Electromagnetic Field) safety guidelines. Also, the equivalent coil of the induction cooktop is derived based on the measured magnetic field distribution using the magnetic dipole moment equation. The magnetic field by the equivalent coil is greater than the measured values at all distances considered and the conservative exposure assessment of the basic restrictions is possible. Next, the current density induced in the human model by the equivalent coil is calculated using the simulation software at various distances for the exposure assessment of the EMF basic restrictions. The exposure index of the induced current density with respect to the exposure limit in the ICNIRP (International Commission on Non-Ionizing Radiation Protection) 1998 guideline was less than 0.369 for all the cases considered.
스팀 유동층 건조기를 이용한 고수분 저등급 석탄의 건조 특성
김기영(Gi Yeong Kim),이영우(Young-Woo Rhee),박재혁(Jae Hyeok Park),선도원(Dowon Shun),배달희(Dal-Hee Bae),신종선(Jong-Seon Shin),류호정(Ho-Jung Ryu),박재현(Jaehyeon Park) 한국청정기술학회 2014 청정기술 Vol.20 No.3
본 연구에서는 고수분 저등급 석탄을 저수분 석탄으로 만들기 위하여 실험실 규모의 회분식 스팀 유동층 건조기를 사용하여 수분이 약 26%함유된 인도네시아산 저등급 석탄을 5% 이하로 건조하였다. 일반적으로 이산화탄소 포집 및 저장기술(carbon capture and storage, CCS)은 CO₂를 재생하는 공정에서 100~150 ℃의 스팀과 CO₂혼합가스를 배출한다. 이때 배출되는 가스의 열을 사용하여 저등급 석탄을 건조하는 것이 본 연구의 최종 목적이다. 이를 위하여 본 연구에서는 건조의 열원으로 스팀을 사용하고, 유동화 가스는 CO₂를 사용하여 저등급 석탄을 건조하였다. 연구에 사용한 스팀의 유량은 0.3~1.1 kg/hr, 온도는 100~130 ℃, 석탄의 층높이는 9~25 cm로 변화시켰다. 건조 후 석탄의 특성 변화는 공업분석, 발열량분석 그리고 입자크기 분석을 통하여 확인하였다. 변수 실험을 수행한 결과 원탄의 건조속도는 스팀의 유량과 온도가 증가함에 따라 증가하였고, 층높이가 감소할수록 건조속도가 증가하였다. In this study, Indonesia low rank coal, which has moisture content of around 26%, is dried less than 5% by using a laboratory-scale (batch type) steam fluidized-bed dryer in order to produce the low-moisture, high rank coal. Normally, CCS (carbon capture and storage) process discharges CO₂ and steam mixture gas around 100-150 ℃ of temperature after regeneration reactor. The final purpose of this research is to dry low rank coal by using the outlet gas of CCS process. At this stage, steam is used as heat source for drying through the heat exchanger and CO₂ is used as fluidizing gas to the dryer. The experimental variables were the steam flow rate ranging from 0.3 to 1.1 kg/hr, steam temperature ranging from 100 to 130 ℃, and bed height ranging from 9 to 25 cm. The characteristics of the coal, before and after drying, were analyzed by a proximate analysis, the heating value analysis and particle size analysis. In summary, the drying rate of low rank coal was increased as steam flow rate and steam temperature increased and increased as bed height decreased.