http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박선재,이화석,김찬인,박종후,전희종,염정덕 전력전자학회 2013 JOURNAL OF POWER ELECTRONICS Vol.13 No.3
As a result of the depletion of fossil fuels and environmental contamination, it has become important to use renewable energy. For the stable utilization of renewable energy sources, energy storage devices must be used. In addition, renewable and distributed power sources with energy storage devices must operate stably under grid-connected mode. This paper proposed dynamic response modeling for renewable power generation systems including a charger/discharger with an energy storage device in order to derive a method to guarantee stable operation while fully utilizing the energy from the energy storage device. In this paper, the principle operation and design guidelines of the proposed scheme are presented, along with a performance analysis and simulation results using MATLAB and PSIM. Finally, a hardware prototype of a 1kW power conditioning system with an energy storage device has been implemented for experimental verification of the proposed converter system.
한국(韓國) 낙엽송재(落葉松材)의 목질(木質)세멘트판(板) 재질(材質)에 미치는 전처리(前處理) 및 첨가제(添加劑) 효과(效果)
박종영,이화형,Park, Jong Young,Lee, Hwa Hyung 충남대학교 농업과학연구소 1982 Korean Journal of Agricultural Science Vol.9 No.1
낙엽송(落葉松)은 몇가지의 세멘트경화장해물질(硬化障害物質)을 함유(含有)하고 있기 때문에 목질(木質)세멘트판(板)의 제조(製造)에 부적합(不適合)한 수종(樹種)으로 알려져 왔다. 따라서 본(本) 연구(硏究)는 국산(國産) 낙엽송재(落葉松材)의 플레이크를 이용(利用)한 목질(木質)세멘트판(板) 재질(材質)에 미치는 전처리(前處理) 및 첨가제(添加劑)의 효과(效果)를 구명(究明)하고자 실시(實施)되었다. 보드의 재질(材質)을 향상(向上)시키기 위(爲)하여 냉수처리(冷水處理) 및 0.1, 0.5, 2.0%NaOH 용액(溶液)에 원료(原料)flake를 전처리(前處理) 시켰으며, $CaCl_2$, $Al_2Cl_3$ 및 $Na_2SiO_4$ 등(等)의 첨가제(添加劑)를 목질(木質)-세멘트혼합시(混合時)에 첨가(添加)시켰다. 본(本) 연구(硏究)에서 얻어진 결과(結果)는 다음과 같다. 1. 0.1%처리(處理)에서의 휨강도(强度)와 박리강도(剝離强度)는 냉수처리(冷水處理)에 비(比)하여 현저(顯著)한 강도증가효과(强度增加效果)를 나타냈다. 2. 휨강도(强度)는 0.1% 이상(以上)의 NaOH처리(處理)와 3% $CaCl_2$ (세멘트 대비(對比)) 첨가조건(添加條件)에서 JIS A-5417의 $60kg/cm^3$ 규격(規格)을 만족(滿足)시켰으며, 각(各) 첨가제(添加劑)는 공(共)히 0.5% 처리농도(處理濃度)에서 최대치(最大値)를 나타냈다. 3. 박리강도(剝離强度)는 0.1% 이상(以上)의 NaOH 처리(處理)에서 $CaCl_2$ 및 $Al_2Cl_3$의 첨가(添加)로 강도증가효과(强度增加效果)를 보였다. 4. NaOH처리농도(處理濃度)가 증가(增加)됨에 따라 팽창률(膨脹率)이 감소(減少)하여 치수안정상태(安定狀態)를 나타낸다. 5. 0.1% 이상(以上)의 NaOH처리(處理)에서 $Al_2Cl_3$, $CaCl_2$ 등(等)의 염화물(鹽化物)을 첨가(添加)시켰을 때 9.0~10.5%의 함수율(含水率)을 평형상태(平衡狀態)로 유지(維持)하였다. 6. 비중(比重)은 휨강도(强度) 및 박리강도(剝離强度) 등(等)의 강도적(强度的) 성질(性質)과 밀접(密接)한 관계(關係)가 있는 것으로 나타났다. The Larch was known unsuitable species for the wood cement board owing to its some inhibitory substances. Therefore this research was carried out to evaluate the effect of pretreatments and chemical additives on the properties of woodflake cement board from Japanese larch (Larix leptolepis) grown in Korea. In order to improve the board qualities, the woodflakes were treated by cold water or dilute NaOH solutions(0.1, 0.5, and 2.0%), and also some chemicals($CaCl_2$, $Al_2Cl_3$ and $Na_2SiO_4$) added to the wood cement mixture. The results obtained are summarized as follow; 1. The wood cement boards from the woodflake treated with 0.1% NaOH showed remarkable higher bending strengths and internal bonding strengths than those from the flake pretreated with cold water. 2. The bending strengths showed over $60kg/cm^2$, i.e. the standard strength of JIS A-5417, with pretreatments of NaOH over 0.1% and additive of $CaCl_2$ 3.0%. The maximum strengths showed at about 0.5 of every additives. 3. Addition of $CaCl_2$ and $Al_2Cl_3$, in the case of pretreated wood with NaOH above 0.1%, had effects on increasing the internal bonding strengths of sample boards. 4. The thickness swellings became decreasing along with the increasing NaOH pretreatment concentntration. 5. The equilibrium conditions of the sample boards pretreated with NaOH over 0.1% and added with $Al_2Cl_3$ and $CaCl_2$ were maintained at 9.0~10.5% moisture contents. 6. The specific gravity of the samples showed close relationships with strength properties.
박지해 ( Ji-hae Park ),김종희 ( Jong-hee Kim ),이화세 ( Hwa-sei Lee ) 한국디자인트렌드학회 2018 한국디자인포럼 Vol.23 No.1
연구배경 최근 의료 산업의 성장에 따라 병원 웹사이트를 통해 의료 서비스에 관한 정보들이 제공되고 있다. 병원 웹사이트에서는 의료 정보를 전달하기 위한 방법 중 하나로 픽토그램이 사용되고 있으나 이에 대한 관련 지침이나 원칙은 부족한 실정이다. 따라서 병원 웹사이트에서 사용 가능한 픽토그램의 기준을 마련하여 제작 원칙들을 제시할 필요가 있다. 연구방법 관련 연구를 통하여 공공과 안전에 대한 픽토그램의 제작 원칙들을 살펴본다. 이러한 제작 원칙들 중병원 웹사이트에서 사용되기에는 적합하지 않은 항목들을 배제하고 필요한 항목들만을 원칙으로 제시하였다. 본 연구에서 제시한 제작 원칙을 기준으로 국내 5대 대형병원 웹사이트들의 픽토그램 사용 현황을 파악하였다. 그래서 원칙에 얼마나 부합하는지를 확인하였다. 연구결과 병원별로 분석 결과, 가장 잘 부합되는 병원은 서울아산병원이고, 그렇지 않은 병원은 서울대학교 병원이었다. 제작 원칙의 항목별 분석 결과, 제시된 원칙에 가장 잘 부합되는 항목은 작도법, 템플릿 레이아웃 그리고 선 굵기이고, 그렇지 않은 항목은 그래픽 심벌의 일관성이었다. 결론 본 연구는 의료 정보의 전달을 위한 병원 웹사이트에서 픽토그램을 사용할 때 도움을 주기 위한 기준을 제시하는데 의의를 두었다. Background Information on medical services is provided through the hospital website recently, depending on the growth of the medical industry. The hospital website uses pictograms as one of the methods to communicate medical information, but lacks relevant guidelines or principles. Therefore, it is necessary to establish the production principles for the pictograms available on the hospital website. Methods Explore the production principles of Pictogram for Public and Safety through relevant studies. Out of these principles, items that were not suitable for use in hospitals were excluded from the hospital websites, and only the items needed were presented in principle. Based on the production principles presented in this study, the utilization of the pictogram of the five largest hospital websites was identified. So we conforms how much it corresponds to the principles. Result As a result of analysis by hospitals, the most relevant hospitals were Seoul Asan Hospital, and the other hospitals were Seoul National University Hospital. According to the analysis of items in the principles, items that are best suited to the principles presented are geometrical construction, template layout and line thickness, and the incongruent item is consistency of graphic symbols. Conclusion This study was meant to provide a criterion for guidance to assist in using the pictogram for medical information of hospital websites.