http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다결정 백금표면에서의 일산화탄소와 일산화질소의 촉매반응에미치는 황의 영향
박윤석,김영호,이호인 ( Youn Seok Park,Young Ho Kim,Ho In Lee ) 한국공업화학회 1990 공업화학 Vol.1 No.2
자동차 배기가스 정화용 촉매계에서 중요하게 취급되는 CO와 NO의 산화환원반응에서 대표적인 촉매독으로 작용하는 황의 영향을 다결정 Pt 표면 위에서 초고진공계를 이용한 열탈착 분광법 (TDS)을 통하여 알아보았다. Pt 표면에서의 CO와 NO의 흡착은 황에 의하여, 물리적인 흡착방해에 의한 직접적인 영향과 전자적 효과에 의한 간접적인 영향을 받았다. 800K 이하의 온도에서 탈착하는 S는 반응활성에 큰 영향을 미치지 못하는 반면, 800K 이상에서 탈착하는 S는 원자상태의 것으로서 반응활성에 직접적인 영향을 미쳤다. Pt 표면위에 흡착된 S는 island형태로 존재하며, S에 의한 전자적인 영향은 주위의 모든 흡착점에 미치는 먼거리 상호작용의 경향을 나타내었다. 한편, Pt 표면에서의 CO와 NO의 반응에서 S에 의한 피독은 특정 활성점에 우선적으로 영향을 미치는 선택적인 경향을 보였다. The effects of sulfur on the catalytic reaction between CO and NO on polycrystalline Pt surface, which is very important in the development of catalyst for automobile exhaust gas control, have been studied using thermal desorption spectrometry(TDS) under ultra-high vacuum(UHV) conditions. Sulfur weakened both the adsorptions of CO and NO by direct site blocking and indirect electronic effect. S(a) desorbing below 800 K gave little effect on reaction activity whereas S(a) desorbing above 800 K, which adsorbs as an atomic state, gave much effect on it. The adsorbed sulfur existed on the surface of platinum in the form of islands, and also reduced the adsorption energies of adsorbates by the long-ranged electronic effect. The platinum catalyst in the reaction between CO and NO was poisoned selectively by S(a), poisoning firstly the active sites of this reaction.
박윤석,Park, Yun-Seok 한국화재보험협회 2006 防災와 保險 Vol.115 No.-
공장이나 일반 건물에서 과전류 및 기열에 의해 절연물이 응용되고 유독 가스를 배출하여 화재의 초기 단계로 발전하는 경우가 많다. 이같은 사고를 예방하기 위한 향 검지기와 향 캡슐을 조합한 이상열 감지 시스템 'CAN 열향'의 원리 및 현장 적용 예를 알아본다.
백금촉매상에서 일산화탄소와 일산화질소의 반응에 관한 연구
박윤석,김영호,이호인 ( Youn Seok Park,Young Ho Kim,Ho In Lee ) 한국공업화학회 1990 공업화학 Vol.1 No.2
자동차 배기가스 정화용 촉매계에서 중요하게 취급되는 CO와 NO와의 산화환원반응을 다결정 Pt표면위에서 초고진공계를 이용한 열탈착분광법(TDS)과 정상상태 실험을 통하여 알아 보았다. CO와 NO의 압력이 각각 1 × 10^(-7) Torr로 일정할 때 CO_2의 생성속도는 560K에서 최대값을 보였으며, 반응온도가 560K, NO압력이 1 × 10^(-7) Torr로 일정할 때, CO_2 생성속도는 CO의 압력에 대하여 1.35 × 10^(-7) Torr를 전후하여 1차에서 -0.3차로 변화하였다. 하지만 이 반응에 미치는 반응물의 압력에 의한 영향은 표면흡착질의 농도에 따라 달리 해석되어야 함을 알 수 있었다. 본 실험의 결과를 종합하여 다결정 Pt상에서의 CO와 NO와의 반응에 대한 새로운 반응기구를 제안하였다. The catalytic reaction between CO and NO on polycrystalline Pt surface, which is very important in the development of catalyst for automobile exhaust gas control, has been studied using thermal desorption spectrometry(TDS) and steady-state experiment under ultra-high vacuum(UHV) conditions. With the pressures of CO and NO of each 1 × 10^(-7) Torr, the CO_2 formation rate showed a maximum at 560K. At the reaction temperature of 560K and the NO pressure of 1 ×10^(-7) Torr, the production of CO_2 was first order in CO pressure below 1.35 ×10^(-7) Torr of CO pressure whereas at higher CO pressures the rate became minus 0.3 order in CO. But the effects of reactant pressure on the reaction was understood in consideration of the surface concentrations of adsorbates. With the results, we proposed a new reaction mechanism for this reaction.
미진동 화약(NewFINECKER) 개발 및 현장 적용에 관한 연구
박윤석 ( Yun Seok Park ),정민수 ( Min Su Jeong ) 대한화약발파공학회 2010 화약발파 Vol.28 No.1
본 고에서는 기존 미진동파쇄기류(미진동파쇄기, 플라즈마 등)의 단점인 시공성 및 경제성을 개선하고, 발파진동을 최소화한 미진동화약(NewFINECKER)의 개발 및 현장적용 사례를 소개하였다. 이 미진동화약은 국토해양부 표준발파패턴中Type-1(미진동굴착공법, 125g 미만의 폭약 사용)에 부합하며, 지발발파가 가능하고, 시공성 및 작업효율을 대폭 개선하는 반면 진동수준은 일반 에멀젼폭약(NewMITE)의 약 60~70% 수준으로 나타났다. 추가적으로 현장 적용시 표준발파패턴, 발파진동추정식, 시공방법 등을 본 연구에 제시하였다. This study improved construction and cost efficiency that are disadvantages of existing low vibration crackers(low vibration cracker, plasma, etc) and introduced cases of development and practical applications of Low vibration explosives(NewFINECKER) that minimizes blast vibration. The low vibration explosives(NewFINECKER) is suitable to Type-1 among standard blasting patterns of Ministry of Land, Transport and Maritime Affairs(MLTM) and delay blasting is possible. Moreover, the low vibration explosives improve construction and work efficiency while the level of vibration is shown to be about 60~70% of normal emulsion explosives. Additionally, this study suggested standard blasting patterns, the prediction equation of blasting vibration, and construction methods.