http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한중근(Han Jung-Geun),김종술(Kim Jong-Sul),이양규(Lee Yang-Kyu),홍기권(Hong Ki-Kwon) 한국토목섬유학회 2011 한국지반신소재학회 논문집 Vol.10 No.4
본 연구에서는 TBM의 관입속도 예측에 대한 경험적 모델을 비교하기 위하여 현장사례를 이용하여 관입속도를 예측하였으며, 예측결과와 시공 시의 실측치를 비교·분석하여 합리적인 모델을 평가하였다. 관입속도 예측은 일축압축강도를 이용한 모델과 암석의 특성 및 TBM의 장비 특성을 고려한 모델로 적용하였다. 사례현장은 대부분 편마암으로 구성되어 있으며, 절리가 발달되어 약선대가 존재하기 때문에 암석의 일축압축강도가 불규칙적으로 나타났다. 일축압축강도를 이용한 예측결과에서 Graham(1976)의 모델은 낮은 강도의 경우, 비현실적인 예측결과가 나타나는 것으로 분석되었다. 평균 관입율을 이용한 각 모델들의 신뢰성을 분석한 결과, 암석의 특성 및 TBM 기계적 특성을 합리적으로 반영한 NTNU 모델(1998)이 가장 높은 것으로 확인되었다. 그러나 실측치와 비교한 결과에서는 일축압축강도를 바탕으로 예측하는 Tarkoy의 모델(1986)이 사례현장의 특성과 일치하는 것으로 분석되었다. 즉, TBM의 관입속도 예측 시에는 대상 암종, 지질특성 및 TBM의 장비 특성을 모두 고려하여 다양한 모델을 이용한 합리적인 예측이 수행되어야 한다. This paper describes prediction results of penetration rate using case history in order to compare empirical models for penetration rate prediction of TBM. The reasonable empirical model is evaluated by comparison with prediction results and measured result. The penetration rate prediction is applied in separate empirical models considering rock characteristics and mechanical characteristics of TBM. The rock of applied filed had almost gneiss and its unconfined compressive strength was irregular due to the exist of weak zones and joint. In prediction results using unconfined compressive strength, Graham's model (1976) had impractical result when it had lower strength. NTNU model (1998) of the separate empirical models used in average penetration rate had the highest accuracy by comparison with the others, because it is a reasonable model which has rock characteristics and mechanical characteristics of TBM. However, Tarkoy's model (1986) based on unconfined compressive strength correspond with the measured values in field. Therefore, it should be considered a rock type, geological characteristic and mechanical characteristic of TBM at prediction of penetration rate.
띠형 섬유보강재의 변형률 분포 특성을 이용한 인발거동 평가
한중근(Jung-Geun Han),윤원일(Won-Il Yoon),홍기권(Ki-Kwon Hong),이광우(Kwang-Wu Lee),조삼덕(Sam-Deok Cho) 한국토목섬유학회 2011 한국토목섬유학회 학술발표회 Vol.2011 No.4
The geosynthetic strip reinforcement have been developed to apply reinforced earth wall with concrete block facing. This paper describes the pullout behavior of geosynthetic strip. The pullout tests are conducted to evaluate the strain distribution of geosynthetic strip reinforcement. The evaluation results were confirmed that strain and pullout force distribution of the geosynthetic strip are concentrated in the front part of reinforcement. It appeared clearly in higher normal stress condition, because the bond between soil and reinforcement according to normal stress affect the strain and pullout force distribution.
음식폐기물 탄화재로 충진된 PRB 설계법 제안을 위한 컬럼실험
한중근(Han Jung-Geun),윤원일(Yoon Won-Il),정동호(Jung Dong-Ho),김용수(Kim Yong-Soo),이종영(Lee Jong-Young) 한국토목섬유학회 2011 한국지반신소재학회 논문집 Vol.10 No.2
PRB 공법은 지하수의 흐름을 변화시키지 않고 오염물질이 지나가는 길목에 반응물질이 삽입된 벽체를 형성함으로써 한번 설치할 경우 운용에 필요한 별도의 시설이 불필요한 경제적인 공법이다. PRB공법의 주요 지배요소는 반응벽체내 반응물질이며, 반응물질과 오염물간의 물리 · 화학적 특성에 따라 정화효율, 사용시간 등이 결정된다. PRB공법은 오엽물의 유입 농도, 유입기간, 흡착반응물질의 특성을 종합적으로 고려한 설계가 이루어져야 높은 정화효율을 기대할 수 있다. 본 연구에서는 PRB시스템에서 구리(Cu²?)제거를 위한 흡착반응물질로 CFW를 사용할 경우 적용성 평가를 위한 컬럼실험을 실시하였다. 컬럼실험은 CFW를 반응물질로 하며 오염물의 유입속도, 밀도, PRB의 두께를 PRB의 설계에 필요한 영향인자로 선정하였다. 실험결과 PRB의 가동 시간이 증가함에 따라 제거효율은 감소하였으며, PRB길이에 따라 제거효율은 선형적으로 증가하였다. 이러한 관계를 이용하여 PRB system의 반응물질 두께를 CFW 밀도, 정화기간을 고려한 제안식을 이용하여 설계할 수 있음을 확인하였다. Permeable Reactive Barriers (PRB) method is an economical method that does not require any other methods to be operated once it is installed as it controls of groundwater flow in the barrier, which is inserted a reactive material on the way of pollutant. The major dominant element of PRB is a reactive material in the reactive wall, and such factors as purification efficiency and used time based on the chemical and physical features in between the reactant and pollutant. High purification efficiency can be expected when a rational design that is synthetically considered in features of packing density, operation period, and adsorption reactant of pollutant. A column test was conducted for an application test using CFW as its adsorption reactant in order to remove copper(Cu²?) in the PRB system. The CFW was used for the reactant and selected inflow speed, density and thickness of PRB as its necessary factors for design of PRB. As a result of the experiment, the removal efficiency decreased as operating time of PRB increased and the efficiency linearly increased upon the length. Therefore, it is confirmed that the thickness of reactive materials in PRB system can be designed using the proposed formula considering purification time and density of CFW.
사면안정성 확보를 위한 지하수위 저하공법 적용사례 연구
한중근(Han Jung-Geun),신주옥(Shin Ju-Oek),홍기권(Hong Ki-Kwon),정순국(Jung Sun-Kuk),이양규(Lee Yang-Kyu),김병수(Kim Byung-Soo) 한국토목섬유학회 2009 한국지반신소재학회 논문집 Vol.8 No.1
본 연구에서는 파괴가 발생한 보강사면의 파괴원인을 분석한 결과, 지하수위 관리대책으로 사례현장에 집수정을 이용한 지하수위 저감공법을 적용하였으며, 적용된 공법이 사면안정성에 미치는 영향을 분석하기 위하여 사면안정해석을 수행하였다. 그 결과, 적용된 공법의 우수처리능력에 의해 사면안정성에 큰 영향을 미치는 것으로 확인되었다. 따라서 본 연구에서 적용된 집수정을 이용한 지하수위 저하공법은 집중강우 시에도 지하수의 상승을 억제함으로 사면의 안전율을 높아지는 것을 확인할 수 있었다. This paper presented that the causes on failure of reinforced slope are analyzed which based on the analyzed result. It had been applied that a method of lowering the groundwater using deepwell for sump. For the stability analysis on applied method, a series of numerical analysis were carried out. Therefore, it could be confirmed that slope stability was affected the dewatering ability of groundwater by the rainfall and this method which was confirmed very reasonable and suitable methods for slope stability, during heavy rainfall, in field.