http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박명학,Park, Myeong-Hak 대한기계설비건설협회 2013 기계설비 Vol.276 No.-
한국폴리텍I대학 서울강서캠퍼스 산업설비자동화과 박명학 교수는 산학협력의 중요성을 강조하는 현장교육 전도사다. 지난 5월 31일부터 6월 2일까지 3일간 서울특별시회 회원사 임직원을 대상으로 재직자 직무향상 교육을 실시한 박명학 교수를 만나보았다.
Alloy 738 초내열합금 4 mm 두께 각관의 정밀주조 시 수축공 및 수축변위 해석 및 분석
박명일,김경민,이영철,이정석,이재현,유재현,박상후,최윤석 대한금속·재료학회 2017 대한금속·재료학회지 Vol.55 No.2
Investment casting for the thin (4 mm thick) rectangular tube (40 mm wide, 80 mm high and 200 mm long) was carried out numerically and experimentally for Alloy 738, which is a precipitation-hardened Ni-base superalloy. Two types of rectangular tubes, one with a regular array (10 mm by 10 mm square array) of protruded rods (3 mm in diameter and 3mm in height) embedded on the outer surface and the other with just smooth surface, were investment-cast at the same time through the side feeding mold design. The investment casting simulation predicted the presence of cavities, particularly in the area away from the gate for both types of rectangular tubes. In particular, for the rectangular tube with embedded protruded rods cavities were found mainly in the areas between the protruded rods. This simulation result was qualitatively consistent with the experimental observation from the X-ray analysis. Also, both prediction and experiment showed that the dimensional shrinkage (particularly in the longitudinal direction) of the investment-cast rectangular tube is reduced by having protruded rods embedded on the outer surface. Additional numerical attempts were made to check how the amount of cavities and dimensional shrinkage change by varying the preheating temperature and the thickness of the mold. The results predicted that the amount of cavities and the dimensional shrinkage are significantly reduced by increasing the preheating temperature of the mold by 200 ℃. However, an increase in mold thickness from 10 mm to 12 mm showed almost no difference in cavity population and a slight decrease in dimensional shrinkage.
정보통신 핵심기반 보호를 위한 민·관 협력체계 실증 분석
박명옥(朴明玉),이재은(李在恩) 충북대학교 국가위기관리연구소 2010 국가위기관리연구 Vol.4 No.1
이 연구는 국가핵심기반 분야 중에서 정보통신 핵심기반 보호를 위한 민·관협력체계에 관한 인식을 분석하는 데 목적이 있다. 실증 분석의 주요 결과는 다음과 같다. 첫째, 조사대상자들은 민·관 협력체계에 대하여 부정적 인식을 갖는 것으로 나타났다. 즉 민·관 협력체계의 사회적 자본 요인, 즉 신뢰, 규범, 네트워크가 잘 이루어지지 않는다고 인식하는 것으로 나타났다. 둘째, 민·관 협력체계의 신뢰에 대한 요인들인 친밀도, 협력 리더십 발휘, 협력을 위한 조직풍토, 정보 공개에 대해 부정적으로 인식하는 것으로 나타났다. 셋째, 민·관 협력체계의 규범에 대한 요인인 공동목표 설정, 협력·협정 마련, 법적 근거, 교육, 구성원 간 가치공유에 대해서도 역시 부정적으로 인식하는 것으로 나타났다.