http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
플라이애시와 고로슬래그 미분말을 혼합 사용한 지오폴리머 모르타르의 강도발현 및 내구성
류금성,고경택,이장화,Ryu, Gum-Sung,Koh, Kyung-Taek,Lee, Jang-Hwa 한국건설순환자원학회 2013 한국건설순환자원학회 논문집 Vol.1 No.1
본 논문에서는 시멘트를 전혀 사용하지 않은 지오폴리머 콘크리트를 개발할 목적으로 시멘트 대신에 결합재로 고로슬래그 미분말 또는 고로슬래그 미분말과 플라이애시를 혼합 사용한 지오폴리머 모르타르의 강도발현과 탄산화 및 동결융해 저항성에 대해 검토하였다. 그리고 비교를 위해 보통포틀랜드 시멘트를 사용한 일반 모르타르에 대해서도 동일한 실험을 수행하였다. 그 결과, 지오폴리머 모르타르는 일반 시멘트 모르타르에 비해 강도발현, 동결융해 저항성 측면에서 우수한 것으로 나타났다. 특히 고로슬래그와 플라이애시를 혼합사용한 지오폴리머 모르타르는 압축강도 60MPa 이상 달성이 가능하고, 일반 시멘트 모르타르에 비하여 동결융해 저항성은 20% 정도 향상되나, 탄산화 속도는 2.2~3.5배 촉진되는 것으로 나타났다. In this study, we investigated the strength development and durability of geopolymer mortar using blast furnace slag only, and admixed with blast-furnace slag and fly ash as cementious materials in oder to develop cementless geopolymer concrete. In order to compare with the geopolymer mortar, the normal mortar using ordinary portland cement was also test. In view of the results, we found out that strength development, the resistance to freezing-thawing of the geopolymer mortar have better than the mortar using ordinary portland cement. Especially, using the combined with blast furnace slag and fly ash develop high strength of above 60 MPa, and improve the resistance of freezing-thawing of approximately 20%, but promote the velocity of carbonation of 2.2~3.5 times.
플라이애쉬 기반(基盤) 알칼리 활성(活性) 모르타르의 역학적(力學的) 특성(特性) 및 미세구조(微細構造) 분석(分析)
류금성,고경택,정영수,Ryu, Gum-Sung,Koh, Kyung-Taek,Chung, Young-Soo 한국자원리싸이클링학회 2012 資源 리싸이클링 Vol.21 No.3
이 논문에서는 시멘트를 전혀 사용하지 않고 결합재로서 플라이애쉬를 100% 사용한 알칼리 활성 콘크리트를 개발할 목적으로 알칼리 활성화제의 화학적 변화에 따른 모르타르의 압축강도에 미치는 영향과 SEM/ EDS 및 XRD 등의 미세구조 분석을 검토하였다. 그 결과, 몰농도가 높을수록 초기강도에 큰 영향을 미치는 것으로 분석되었고, 압축강도의 크기에 비례하여 $Si^{4+}$ 및 $Al^{3+}$량이 용출되었다. 또한 SEM 및 EDS로 조직을 분석한 결과 모르타르의 조직구조에 큰 영향을 미치는 성분은 Al 및 Si 성분이었고, XRD 분석결과 활성화제 성분차이에 따른 세기(intensity)의 차이는 거의 없는 것으로 나타났다. The purpose of this paper is to develop the alkali-activated concrete which uses 100% fly ash as a binder without any cement. The compressive strength of the mortar was examined depending on the chemical change in alkali-activator through SEM and SEM/EDS observations and the XRD analysis. It was found from the test that the higher molar concentration induced the greater effect on the initial strength, and that $Si^{4+}$ and $Al^{3+}$ were eluted relative to the compressive strength of mortar. In addition, it was confirmed that Al and Si were determined to be most influential ingredients on the microstructural development of the mortar, and that the different ingredient of the activator was almost no change in solidity from the XRD analysis.
강섬유 보강 초고성능 콘크리트의 탄성계수 및 인장강도 평가
류금성,유성원,Ryu, Gum-Sung,Yoo, Sung-Won 한국건설순환자원학회 2015 한국건설순환자원학회 논문집 Vol.3 No.3
최근에 활발히 연구되어지고 있는 UHPC의 경우, 강섬유 혼입량에 의해서 인장강도가 절대적으로 영향을 받는 이유로 본 논문에서는 압축강도, 강섬유량 등을 변수로 하여 압축강도, 탄성계수 및 인장강도 등을 실험적으로 구한 후, 그 결과를 분석하였다. 실험결과에 의하면, 압축강도와 탄성계수 및 인장강도는 비례관계로 상당한 상관성을 가지는 것으로 나타났으며, 섬유혼입률에 따른 압축강도와 인장강도의 관계 역시는 비례관계의 상관성을 가지는 것으로 나타났다. 탄성계수의 경우, 실험결과와 현행 국내 설계기준 식의 차이는 그다지 크지 않은 것으로 나타나, 기존의 설계기준 식을 준용하여도 UHPC 탄성계수 평가에는 큰 문제가 없을 것으로 예상된다. 한편 인장강도의 경우, 현행 설계기준에서 제시되지 않은 이유로 비선형 회귀분석을 실시하여 섬유혼입률을 고려한 인장강도 식을 제안하였으며, 제안된 식은 좋은 상관성을 보이는 것으로 나타났다. Recently, for UHPC (Ulta High Performance Concrete) which is researched actively, as the tensile strength is absolutely influenced on the content of steel fiber, in this paper, experiments of compressive strength, elasticity modulus and tensile strength were performed according to compressive strength and content of steel fiber as variables. By the test results, compressive strength, elasticity modulus and tensile strength are proportioned and have a good correlation and according to content of steel fiber, compressive and tensile strength are also proportioned and have a good correlation. In case of elasticity modulus, the difference between test and present design code is not large, so it is possible to adapt to present design code. On the other hand, in case of tensile strength, as there is no specification of present design code, new prediction equation is proposed by using nonlinear regression analysis and the proposed equation have a good correlation to test results.
류금성 ( Ryu Gum-sung ),고경택 ( Koh Kyung-taeg ),김도겸 ( Kim Do-gyeum ),김성욱 ( Kim Sung-wook ) 한국구조물진단유지관리공학회 2000 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.4 No.2
Since many of these structures were built before 1980's, these are either already repaired or to be repaired. Current safety assessments on these structures have confirmed that a large number of RC structures need maintenance, repairs and retrofit works. The factors considered in deterioration of RC structures may take several forms, which include the chloride corrosion, carbonation. alkali aggregate reaction and abrasion. Deterioration in RC structures is a problem, in which many agencies are involved. However, it use without verification for the foreign test method and standard of repair materials in Korea. Therefore, this study is investigated for adhesive strength repair materials in view of durability as a study to enact test method and standard of qualities for repair materials taking into consideration of Korea situation.