RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        강섬유로 보강된 초고성능 콘크리트 바닥판과 역T형 강거더 합성보의 휨거동 실험

        유성원,안영선,차영달,조창빈 한국콘크리트학회 2014 콘크리트학회논문집 Vol.26 No.6

        인장강도 및 휨강도가 낮고 취성파괴의 특성을 가지는 일반적인 콘크리트의 단점을 극복하기 위하여 최근에는 압축강도가 180 MPa이상인 고성능 콘크리트에 강섬유를 혼입한 강섬유 보강 초고성능 콘크리트(UHPC)에 대한 연구가 활발히 진행되고 있다. UHPC 바닥판과 강재 거더를 이용하여 합성보를 구성할 때, UHPC 바닥판의 높은 강도와 강성으로 인하여 강재거더 상부 플랜지의 역할이 거의 불필요할 것으로 예상된다. 이러한 점을 착안하여 본 논문에서는 합성보 구성 시에 강재 거더의 상부플랜지를 없앤 역T형 거더를 적용하였다. 역T형 거더에 UHPC바닥판을 합성하여 합성보를 구성할 경우, 상부플랜지가 없는 이유로 전단연결재의 설치 위치가 상부플랜지 대신에 강재 거더 복부에 설치해야하는 문제점이 발생되며, 강재 복부에 설치되는 전단연결재에 대한 거동, 역T형 강거더 합성보의 휨거동 특성 등은 현재까지 실험 및 이론적으로 평가된 적이 거의 없는 실정인이유로 이에 대한 연구가 절실하다. 이를 위하여 본 논문에서는 전단연결재 간격, 바닥판 두께 등을 변수로 하여 역T형 거더와UHPC바닥판을 합성한 합성보를 8개 제작하여 전단연결재의 거동, 휨거동 특성 등을 파악하고자 하였다. 실험결과를 기준으로볼 때, 향후 UHPC의 경우 스터의 간격은 100 mm에서 바닥판 두께의 2~3 배 사이로 규정함이 적절할 것으로 예상된다. 또한 실험 부재의 특성 상대변위는 Eurocode-4의 연성거동 기준에 의하면 충분한 연성 거동을 하는 것으로 판정되었으며, 바닥판이 지나치게 얇고 전단연결재의 간격이 지나치게 넓은 경우를 제외한 대부분의 부재들은 일반 콘크리트보다 UHPC의 성능이 우수하여기존의 AASHTO LRFD 및 Eurocode-4의 식과 실험결과간의 차이가 있음을 알 수 있다.

      • KCI등재

        외부 PSC 보에서 외부강선의 극한 응력 예측식 제안

        유성원,하헌재 한국안전학회 2010 한국안전학회지 Vol.25 No.5

        Recently, the external prestressed concrete structures are increasingly being built. The mechanical behavior of prestressed concrete beams with unbonded tendon is different from that of normal bonded PSC beams in that the increment of tendon stress was derived by whole member behavior. By this reason, the ultimate stress of external tendon is smaller than that of bonded tendon or internal unbonded tendon. However, in the domestic and abroad code, the equation of ultimate stress of external tendon is not suggested yet, and the equation of ultimate stress of internal unbonded tendon is used instead of that of external tendon. Therefore, in this paper, after effective variables of ultimate stress of external tendon were analyzed, the analytical equation of ultimate stress of external tendon was proposed. And the reasonable coefficients were proposed by statistical work of test results of 25 beam with external tendon. Finally, the practical proposed equation of ultimate stress of external tendon was proposed with analytical and statistical model. The equation of ACI-318 and AASHTO 1994 were not matched with test results and had no correlations, and the proposed equation was well matched with test results. So the proposed equation in this paper will be a effective basis for the evaluation of external tendons in analysis and design.

      • KCI등재

        가변형 핑거 조인트를 가지는 신축이음장치의 구조 성능 실험

        유성원 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 논문집 Vol.22 No.6

        내진 성능 학보를 위해서는 신축이음장치가 지진력에 대하여 적절한 변형이 발생하여 신축이음장치의 파괴를 방지하여야 하는데 최근에 국내에서 신축이음장치의 핑거부에 힌지를 설치하여 교축방향의 지진력에 대한 변위 저항성을 확보한 신제품이 개발되고 있다. 이에 본 논문에서는 가변형 핑거 조인트를 가지는 신축이음장치에 대하여 실물규모의 교축직각방향 하중에 대한 저항성을 실험적으로 평가하였다. 실험결과, 최대 수평변위는 기존 신축이음 실험체의 경우 약 21.1mm, 내진 신축이음 실험체의 경우 51.00mm로 나타났으며, 기존제품은 추가적으로 16.5mm의 솟음이 발생되었다. 기존 신축이음 실험체는 어느 정도의 교축직각 방향의 하중에 대하여 저항한 후, 핑거의 휨 및 전단 변형이 과도하게 발생되며 파단 현상이 발생할 가능성이 있을 것으로 추정된다. 반면에 내진 신축이음 실험체의 경우, 교축 직각방향의 하중에 대하여 하중에 대한 변형을 핑거의 힌지가 흡수하여 신축이음장치 및 상부구조에 응력을 발생시키지 않고 다만 하중 작용방향으로의 수평 변형만 발생시킬 것으로 예상된다. For the seismic performance, it is necessary to prevent the destruction of the expansion joint device due to the appropriate deformation of the expansion joint device due to the seismic force. Recently, the hinge is installed on the fingering of the expansion joint device in Korea, New products are being developed. In this paper, we have experimentally evaluated the real scale resistance of the expansion joints with rotational finger joints against load at right angle to the bridge axis. Experimental results show that the maximum horizontal displacement is about 21.1mm for conventional stretch joints and 51.00mm for seismic stretch joints. It is presumed that the existing expansion joint test specimen is resistant to the load in a direction perpendicular to the throat axis, and then the bending and shear deformation of the finger are excessively generated and the fracture phenomenon is likely to occur. On the other hand, in the case of the seismic expansion joint, the deformation of the load due to the load is absorbed by the hinge of the finger with respect to the load in the direction perpendicular to the throat, so that only horizontal deformation in the direction of load action.

      • KCI등재

        비소성 시멘트 콘크리트의 휨 거동에 관한 연구

        유성원,남은용,이상준,황선복,소양섭,김재신 한국안전학회 2012 한국안전학회지 Vol.27 No.2

        If cement can be manufactured with industrial byproducts such as granulated blast furnace slag,phosphogypsum, and waste lime instead of clinker, there would be many advantages, including maximum use of these industrial byproducts for high value-added resources, conservation of natural resources and energy by omitting the use of clinker, minimized environmental pollution problems caused by CO2 discharge, and reduction of the production cost. By this reason, in this study, mechanical behavior tests of non-burnt cement concrete were performed, and elasticity modulus and stress-strain relationship of non-burnt cement concrete were proposed. 6 test members were manufactured and tested according to reinforcement ratio and concrete compressive strength. By the test results, there was no difference between ordinary concrete and non-burnt cement concrete of flexural behavior. In order to verify the proposed non-burnt cement concrete model, nonlinear analytical model was derived by using strain compatibility method. By the results of comparison between test results, ordinary concrete model and proposed model, The proposed model well predicted the flexural behavior of non-burnt cement concrete

      • KCI등재후보

        일 지역사회 독거노인의 삶의 질과 관련된 우울 및 인구사회적 요인

        유성원,김현수,손상준,배활립,국소담 대한노인정신의학회 2014 노인정신의학 Vol.18 No.1

        Objective:This study is to suggest the plans for improving the quality of lives of the solitary old people by evaluating the effects of depression, social supports, and activity of daily living to the quality of life. Methods:The subjects of this research were 329 elderly people who lived alone in Gangseo-gu, Seoul, Korea. They were recruited and underwent the questionnaire including their sociodemographic data, Activities of Daily Living/Instrumenal Activities of Daily Living scale (ADL/IADL) and the Korean version of the Short Geriatric Depression Scale (SGDS-K). Statistical analyses including Pearson’s correlation test, Multiple regression were performed in this study. Results:They were composed of 83.6% females and 16.4% males and almost age was between 70 and 84 years old. House welfare availability (p<0.05), subjective economic status (p<0.05), and SGDS-K score (p<0.01) had a negative correlation with Quality of life. Multiple regression analysis revealed that Quality of life correlates to SGDS-K score (p<0.05). Conclusion:The quality of life of elderly living alone was related with depression. Early detection and management for depression may need to be considered for quality of life of community dwelling elderly living alone.

      • 스포츠는 과학이다 - 올림픽에 숨어 있는 특허기술들

        유성원,Yu, Seong-Won 한국발명진흥회 2012 發明特許 Vol.37 No.8

        2012년 런던 올림픽의 막이 올랐다. 4년동안 땀과 눈물로 올림픽을 준비했던 선수들의 모습들은 모두 감동 그 자체이다. 올림픽이라는 세계 최고를 향한 승부에서 승리하기 위하여 선수들은 자신의 젊음과 인생을 걸고 매일매일 고된 훈련을 소화했을 것이다. 그런데, 올림픽의 주인공은 선수들만이 아니다. 올림픽에서 자신의 기량을 뽐내며 겨루고 있는 또 다른 주인공은 바로 선수들이 입고 있거나 사용하고 있는 운동복과 운동장비에 숨어 있는 첨단 과학이다. 첨단 기술 때문에 메달의 색깔이 바뀐다고 할 정도로 첨단 기술이 적용된 의류나 장비들은 선수들에게 있어서 훈련에 버금갈 정도로 중요한 요소이다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼