http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PLASMA SPRAY 법에 의한 ZrO₂TBC의 고온 내마모 특성에 관한 연구
노병호,박만호,한주철,이구현,권식철,변응선,송요승,조정환 한국항공대학교 1996 論文集 Vol.34 No.-
Plasma Spray 법에 의해 제조된 YSZ/NiCrAlY, MSZ/NiCrAlY 2층, 3층구조 TBC에 대하여 고온 내마모 시험을 실시하였다. 400, 600, 800℃에서 12000Counts 시험한 결과 2층구조 보다는 3층구조가, MSZ 보다는 YSZ가 우수한 고온 내마모 물성을 나타내었다. MSZ의 상대적으로 떨어지는 내마모 물성은 자체의 기계적 성질 뿐만 아니라 Coating층 내에 보다 많이 형성된 공공에 의한 것으로 사료된다. 고온으로 올라갈수록 내마모 물성의 저하가 확연하였으며, 마모는 응착마모 거동을 나타내었다. Tribologycal characteristics at high temperature of YSZ/NiCrAlY, MSZ/NiCrAlY 2 or 3 layers TBC by Plasma Thermal Spray process is investigated. As the result of testing for 12000 counts at 400, 600, and 800℃, it drops off in wear characteristics at 600℃ than 400℃. The 3 layers coating and YSN/NiCrAlY is proved to be superior characteristics in high temperature tribology than 2 layers, MSZ. It is regarded that the more pores act on the wear characteristics of MSZ. All specimens is showed adhesive wear mode.
ZrO₂ Plasma Coating layer의 열충격 거동 및 접착력에 관한 연구
노병호,이구현,한주철,송요승,변응선,조정환,박만호,권식철 한국항공대학교 1996 論文集 Vol.34 No.-
플라즈마로 용사된 지르코니아 코팅층에 대한 열충격 거동에 대해 연구하였다. 플라즈마 코팅층의 열충격 거동은 코팅층의 형태와 코팅층이 사용되는 온도, spray된 powder에 의해 영향을 받는 것이 확인되었다. 또한 코팅층 내에 존재하는 공공과 spray시 용융되지 않은 powder등이 열충격 거동에 많은 영향을 미쳤으며 코팅층의 수면과 복합층내의 금속성분의 산화와 NiCrAlY의 금속층의 산화와는 많은 연관관계가 있었다. Thermal shock behavior of plasma spayed zirconia coating layer were studied. The thermal shock behavior of plasma coating layer is affected by coating layer shape, temperature and sprayed powders. Also pores and not molten powders influence thermal shock behavior. There are many relations among the coating layer life and coating layer oxidation of metallic layer (NiCrAlY layer) and metallic element oxidation in the composite layer.
Sn-Zn 도금용 합금의 열처리에따른 구조변화에 관한 연구
정철,송요승,변응선,노병호 한국항공대학교 1997 論文集 Vol.35 No.-
이 연구의 목적은 내식성 도금재료의 개발이다. Sn-Zn을 기본합금으로 하여 미량원소를 첨가한 후 용융시켰다. quenching, tempering, annealing과 같은 열처리에 의해 미세구조와 특성들이 변화하였다. 열처리와 첨가원소의 결과로서 acicula dendrit들이 분산되었다. 경도시험의 결과는 quenching과 tempering에 의해 감소되었다. quenching과정이 acicula dendrit를 분산시키는데 가장 중요한 열처리이다. The purpose of this study was the development of the noncorrosive plating materials. The micro adding elements were mixed and melted with the basic alloy of Sn-Zn. The post heat treatments like as quenching, tempering and annealing were carried out to change the microstructure and the properties. As the results of the heat tretment and the adding element, the acicular dendrits were dispersed. The hardness number was decreased according the quenching and tempering. The quenching process was the main heat treatment to disperse the acicular dendrites.
Sn-Zn 도금용 합금의 열처리 및 첨가원소에 따른 구조변화에 관한 연구
변응선,정철,송요승,노병호 한국 항공대학교 항공산업기술연구소 1997 航空宇宙産業技術硏究所 硏究誌 Vol.7 No.-
이 연구의 목적은 내식성 도금재료의 개발이다. Sn-Zn을 기본합금으로하여 미량원소를 첨가한 후 용융시켰다. Quenching, tempering, annealing과 같은 열처리에 의해 미세구조와 특성들이 변화하였다. 열처리와 첨가원소의 결과로써 acicula dendrite들이 분산되었다. 경도 시험의 결과는 quenching과 tempering에 의해 감소되었다. Quenching과정이 acicula dendrit를 분산시키는데 가장 중요한 열처리이다. 또한 첨가원소에 의한 경도값은 연화되었다. The purpose of this study is the development of the noncorrosive plating materials. The micro adding elements were mixed with the basic alloy of Sn-Zn and were melted. The post heat treatments like as quenching, tempering and annealing were carried out to change the microstructure and the properties. As the results of the heat treatment and the adding element, the acicular dendrites were dispersed. The hardness number was decreased according the quenching and tempering. The quenching process was the main heat treatment to disperse the acicular dendrites. The hardness number according to the alloy element was decreased.
박만호,송요승,노병호 한국항공대학교 1997 論文集 Vol.35 No.-
플라즈마로 용사한 서로 다른 세가지의 열장벽 코팅층의 열충격 거동에 관해 연구하였다. 용사 피막중 첫번째 피막은 2층구조로 최상층은 단열을 위한 세라믹 코팅으로 형성하였으며, 다른 층은 결합층으로 형성하였다. 두 번째 구조는 3층구조로 최상층과 결합층 사이에 열응력을 완화시키기 위하여 세라믹과 금속을 섞은 복합층을 도입하였다. 마지막 세번째 구조는 내열특성을 향상시키기 위하여 최상층과 결합층 사이에 세가지의 다른 복합층을 도입하였다. 5층구조의 열장벽 코팅층의 내열충격성은 3층구조나 2층구조보다 우수한 것으로 나타났다. 5층구조의 열충격 파괴기구는 단열층에서 수직크랙이 발생하고 열충격이 횟수를 거듭할수록 이 크랙이 복합층으로 발달해 들어갔다. 최종적으로 이들 크랙은 코팅과 모재사이의 계며에 도달했으며, 또한 이들크랙이 각 층의 수평크랙과 연결이 되어 다층코팅층의 파괴가 발생하였다 그러나 2층 구조의 주된 파괴기구는 코팅과 모재사이의 계면에서 초기에 크랙이 발생하고, 열충격 횟수가 거듭될수록 이들 크랙이 계면으로 발달하여 파괴가 발생하는 것으로 나타났다. The thermal shock properties of the three difference thermal barrier coatings by plasma spray process were studied. The first type is composed of the two layers. The top layer is the ceramics coating for the insulation and the other is bond coating. The second type has the three difference coating layers. The composite layer between top and bond layer, which was mixed with ceramics and metal, was introduced for the relief of the thermal stress. Finally, the three different composite layers between top and bond layer were made to improve the thermal properties. The thermal shock resistance of thermal barrier coatings with 5 layers is better than those of 3 layers and 2 layers. The thermal shock mechanism of 5 layers is the vertical crack generation in insulating layer. This means that the initial cracks were generated in the top layer, and then developed into the composite layers during thermal shock test. Finally, these cracks were reached to the interface of coating and substrate and also, these vertical cracks join with the horizontal cracks of the each layers. Therefore, the fracture of the multi-layer coatings was appeared by these crack mechanism. But, the main mechanism of the 2 layer system was the horizontal crack generation of the interface between coating and substrate in the first stage. These cracks were developed along the interface during the thermal shock test. The coatings were fractured.