http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
능선형상의 유전체 구조를 갖는 AC-PDP의 Xe 함량 변화에 대한 발광특성
남문호,김정민,최시영 대한전자공학회 2004 電子工學會論文誌-SD (Semiconductor and devices) Vol.41 No.8
In this paper, we suggest a new front panel structure with ridged front panel dielectric layer and hollow gap. The proposed structure can decrease a driving voltage and increase Xe content due to strong electric fields. In the experiment, we have used 6" test panel with 10 %, 15 %, 20 %, 30 % and 50 % Xe contents and 450 torr gas pressure. When comparing with a conventional structure in Xe 10 %, the proposed structure with same Xe content decreased a firing and sustain voltage by about 74 V and 79 V, also the luminance and luminous efficacy of proposed structure with 50 % Xe content were improved by about 33 % and 50.9 %..9 %. 본 논문에서는 방전유지전극사이에 유전체 공극이 존재하는 능선형상의 상판구조를 제안하였다. 이 구조는 상판의 방전 유지 전극사이 강한 전계를 이용하여 동작전압을 감소시킬 수 있고 이로 인한 Xe의 주입비율을 증가시켜 휘도 및 발광효율을 향상시킬 수 있는 구조이다. 실험에서는 6인치 테스트 패널을 사용하였으며 기체 압력을 450 torr로 유지하면서 Xe 함량을 10 %, 15 %, 20 %, 30 %, 50 %로 변화하여 실험하였다. 실험결과, 10 %의 동일한 Xe 기체를 주입한 결과, 제안된 구조를 적용할 경우, 방전개시전압과 방전유지전압이 각각 79 V, 74 V 감소하였으며 10 %의 Xe을 주입한 일반적인 구조와 50 %의 Xe을 주입한 제안된 구조의 휘도와 발광효율 비교에서 본 논문에서 제안한 구조가 비슷한 구동전압 범위에서 일반적인 구조에 비하여 효율은 50.9 % 향상되었고, 휘도는 33 % 향상됨을 알 수 있었다.
풍력 블레이드의 박리 검출을 위한 위상배열 초음파 탐상 검사 적용
남문호,지수정,임선 한국풍력에너지학회 2018 풍력에너지저널 Vol.9 No.3
A wind turbine blade is an important part of a wind turbine generator that converts the kinetic energy of wind into mechanical energy. Because the blades are constantly subjected to forces, they are always exposed to unstable conditions, and there is always a risk of internal defects. Therefore, among nondestructive inspection methods, there is continuing research on ultrasonic inspection that can detect the internal defects of a blade. However, ultrasonic inspection has several problems, such as the issue of storing inspection data. In this study, we confirmed the possibility of detecting defects in the joints of blades by applying phased array ultrasonic inspection, which is a development type of ultrasonic inspection used mainly for blade inspection, after specimens were made with delamination defects that occur frequently in blade joint areas.
능선형상의 유전체 구조를 갖는 AC-PDP의 Xe 함량 변화에 대한 발광특성
남문호,최시영,김정민 대한전자공학회 2004 電子工學會論文誌-SD (Semiconductor and devices) Vol.41 No.08
In this paper, we suggest a new front panel structure with ridged front panel dielectric layer and hollow gap. The proposed structure can decrease a driving voltage and increase Xe content due to strong electric fields. In the experiment, we have used 6" test panel with 10 %, 15 %, 20 %, 30 % and 50 % Xe contents and 450 torr gas pressure. When comparing with a conventional structure in Xe 10 %, the proposed structure with same Xe content decreased a firing and sustain voltage by about 74 V and 79 V, also the luminance and luminous efficacy of proposed structure with 50 % Xe content were improved by about 33 % and 50.9 %. 본 논문에서는 방전유지전극사이에 유전체 공극이 존재하는 능선형상의 상판구조를 제안하였다. 이 구조는 상판의 방전 유지 전극사이 강한 전계를 이용하여 동작전압을 감소시킬 수 있고 이로 인한 Xe의 주입비율을 증가시켜 휘도 및 발광효율을 향상시킬 수 있는 구조이다. 실험에서는 6인치 테스트 패널을 사용하였으며 기체 압력을 450 torr로 유지하면서 Xe 함량을 10 %, 15 %, 20 %, 30 %, 50 %로 변화하여 실험하였다. 실험결과, 10 %의 동일한 Xe 기체를 주입한 결과, 제안된 구조를 적용할 경우, 방전개시전압과 방전유지전압이 각각 79 V, 74 V 감소하였으며 10 %의 Xe을 주입한 일반적인 구조와 50 %의 Xe을 주입한 제안된 구조의 휘도와 발광효율 비교에서 본 논문에서 제안한 구조가 비슷한 구동전압 범위에서 일반적인 구조에 비하여 효율은 50.9 % 향상되었고, 휘도는 33 % 향상됨을 알 수 있었다.
벤더블 검출기의 평면 및 벤딩에 따른 디지털 방사선 투과 검사 영상 비교 실험
남문호,양진욱,조갑호 한국비파괴검사학회 2023 한국비파괴검사학회지 Vol.43 No.1
현재 많이 사용되고 있는 검출기는 평면형으로 되어 있어 곡면의 검사 대상물에 대한 디지털 방사선 촬영 시 영상의 왜곡이 발생한다. 본 실험에서는 최대 90R까지 벤딩이 가능하도록 개발된 벤더블 검출기를 대상으로 알루미늄 망과 납 글자를 검사 대상물로 하고 디지털 방사선 촬영을 실시하여, 기존의 평면형 및 벤딩형에 대한 디지털 영상을 각각 비교하였다. 영상 확인 결과, 곡면의 검사 대상물에 대해 평면형 검출기의 영상은 중심부에서 벗어날수록 영상의 왜곡이 증가하였으나. 벤딩형 검출기의 영상은 중심부에서 벗어나도 영상 끝부분에서 왜곡되지 않은 영상이 확인되었다. 이는 검사 대상물과 검출기 사이의 거리가 서로 밀착되어 영상의 왜곡이 없었고 회색 값을 통한 프로파일에서도 확인할 수 있었다. 이를 통해 다양한 검사 대상물에 대한 디지털 방사선 촬영 시 검출기와 밀착이 가능하도록 검출기의 각도를 변형하여 사용한다면 평면형 검출기로 촬영된 디지털 영상보다 더 나은 상질의 영상을 획득할 수 있을 것이라 사료된다.
위상배열 탐상검사법을 이용한 풍력발전용 블레이드의 일정가압 메커니즘 신뢰성 평가
남문호(Mun Ho Nam),지수정(Su Chung Chi),임선(Sun Lim),임승환(Seung Hwan Lim),정예찬(Ye Chan Jeong) 한국신뢰성학회 2017 신뢰성응용연구 Vol.17 No.3
Purpose: There is no established inspection system for composite wind blade during the fabrication stage even though the blades are one of the most important part at wind generation system, but phased array ultrasonic testing method has been continuously studied about wind turbine blade with composite. When wind turbine blade with complex shape by phased array probe is inspected, it is necessary to study for system keeping constant pressure using pressure device. Methods: In this paper, we propose constant pressure device for inspecting wind turbine blade by phased array ultrasonic test method. Design of the device controller is based on Hunt-Crossley model. We evaluate reliability of phased array ultrasonic inspection result that applicated constant pressure device. Result: Defect indication is precise and its error is small when constant pressure mechanism based on Hunt-Crossley model was used. Conclusion: When inspection is progressed using constant pressure mechanism, the reliability of composite wind blade inspection can be improved.